index
:
u-boot-toradex.git
2011.12-colibri_vf
2014.04-toradex
2014.10-toradex
2014.10-toradex-next
2015.04-imx7-1.1.0_ga-toradex-next
2015.04-toradex
2015.04-toradex-next
2016.11-toradex
2016.11-toradex-next
colibri
colibri-next
colibri_vf
toradex_2019.07
toradex_2019.07-next
toradex_2020.07
toradex_imx6
toradex_imx_lf_v2022.04
toradex_imx_lf_v2024.04
toradex_imx_v2017.03_4.9.123_imx8mm_ga-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta1-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta2-bring_up
toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringup
toradex_imx_v2018.03_4.14.78_1.0.0_ga-bringup
toradex_imx_v2018.03_4.14.98_2.3.0_bringup
toradex_imx_v2020.04_5.4.24_2.1.0
toradex_imx_v2020.04_5.4.70_2.3.0
toradex_ti-u-boot-2021.01_bringup
toradex_ti-u-boot-2023.04
toradex_ti-u-boot-2024.04
U-Boot bootloader for Apalis and Colibri modules
Toradex
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
board
Age
Commit message (
Expand
)
Author
2018-06-06
colibri-imx6ull: fix card detect GPIO of SD card
Stefan Agner
2018-06-06
colibri-imx6ull: Set the DDR RAM ASR bit
Sven Guggisberg
2018-06-06
tdx-cfg-block: fix off by one issue
Marcel Ziswiler
2018-03-21
colibri_t20: fix passing mac address via dt
Colibri-iMX7_LXDE-Image_2.8b2.97-20180331
Colibri-iMX6_LXDE-Image_2.8b2.97-20180331
Colibri-iMX6ULL_LXDE-Image_2.8b2.97-20180331
Colibri-VF_LXDE-Image_2.8b2.97-20180331
Colibri-T30_LXDE-Image_2.8b2.97-20180331
Colibri-T20_LXDE-Image_2.8b2.97-20180331
Apalis-iMX6_LXDE-Image_2.8b2.97-20180331
Apalis-TK1_LXDE-Image_2.8b2.97-20180331
Apalis-TK1-Mainline_LXDE-Image_2.8b2.97-20180331
Apalis-T30_LXDE-Image_2.8b2.97-20180331
Marcel Ziswiler
2018-03-21
apalis_t30/tk1/colibri_t20/t30: integrate mac address via dt
Marcel Ziswiler
2018-03-21
colibri_t20: integrate mtd partitions via dt
Marcel Ziswiler
2018-03-21
tdx-cfg-block: add new SKUs
Stefan Agner
2018-03-21
colibri-imx6ull: add MTD fixup compatible for mainline kernels
Stefan Agner
2018-03-20
colibri_imx7: do not mux SODIMM 169 as NAND chip select
Stefan Agner
2017-11-27
colibri_imx6ull: add dtb for wifi variant
Max Krummenacher
2017-11-27
colibri_imx6ull.c: remove dead code
Max Krummenacher
2017-10-03
apalis-tk1: support v1.2 hardware revision
Colibri-iMX7_LXDE-Image_2.7b4-20171005
Colibri-iMX6_LXDE-Image_2.7b4-20171005
Colibri-VF_LXDE-Image_2.7b4-20171005
Colibri-T30_LXDE-Image_2.7b4-20171005
Colibri-T20_LXDE-Image_2.7b4-20171005
Apalis-iMX6_LXDE-Image_2.7b4-20171005
Apalis-TK1_LXDE-Image_2.7b4-20171007
Apalis-TK1-Mainline_LXDE-Image_2.7b4-20171005
Apalis-T30_LXDE-Image_2.7b4-20171005
Marcel Ziswiler
2017-10-03
apalis-tk1: rename fan enable gpio signal
Marcel Ziswiler
2017-10-02
colibri-imx6ull: make sure MTD partitions get passed
Stefan Agner
2017-10-02
colibri-imx6ull: use SDP if USB serial downloader has been used
Stefan Agner
2017-10-02
colibri_imx7: improve DDR3 timing
Stefan Agner
2017-08-31
colibri_imx7_emmc: add Colibri iMX7 Dual 1GB (eMMC) support
Stefan Agner
2017-08-31
colibri_imx6ull.c: setup all used uart to dte mode
Max Krummenacher
2017-08-31
colibri-imx6ull: add initial
Max Krummenacher
2017-08-31
tdx-cfg-block: add new sku's
Max Krummenacher
2017-08-31
colibri-vf: sync the board info message
Bhuvanchandra DV
2017-08-31
toradex: common: unify behaviour when config block is missing
Bhuvanchandra DV
2017-08-31
colibri_imx6: use SDP if USB serial downloader has been used
Stefan Agner
2017-08-31
apalis_imx6: use SDP if USB serial downloader has been used
Stefan Agner
2017-08-31
colibri_imx7: use SDP if USB serial downloader has been used
Stefan Agner
2017-08-31
apalis_t30: fix optional pcie port reset for reliable pcie operation
Marcel Ziswiler
2017-08-31
apalis_t30: fix pcie port 2 pin muxing
Marcel Ziswiler
2017-08-31
pci: tegra: introduce weak tegra_pcie_board_port_reset() function
Marcel Ziswiler
2017-09-01
apalis-tk1: set apalis gpio 8 aka fan_en
Dominik Sliwa
2017-09-01
colibri_imx7: carve out PMD aligned amount of memory
Stefan Agner
2017-09-01
toradex: configblock: add an -y parameter to 'cfgblock create’
Dominik Sliwa
2017-08-28
apalis-tk1: do not explicitly release reset_moci#
Marcel Ziswiler
2017-08-25
apalis_t30: fix usb otg power enable
Marcel Ziswiler
2017-06-18
toradex: colibri_imx6: overwrite CMA memory set in device tree
Bhuvanchandra DV
2017-06-05
toradex: make USB PID from config block optional
Stefan Agner
2017-06-05
apalis/colibri-imx6: revert fuse value set in mfgr_fuse
Max Krummenacher
2017-06-05
colibri-imx6: change pmic fusing according to hw 1.1 requirements
Max Krummenacher
2017-05-29
colibri_imx7: discard unused usdhc3_emmc_pads iomux
Marcel Ziswiler
2017-05-29
apalis_imx6: discard unused vga_pads iomux
Marcel Ziswiler
2017-04-04
apalis/colibri imx6: disable ri and dcd irq in uarts
Max Krummenacher
2017-03-30
common: apalis/colibri imx6: spl: add config to silence console output
Max Krummenacher
2017-03-30
ARM: vf610: move to standard arch/board approach
Stefan Agner
2017-03-30
colibri_imx7: use device-tree for MTD partitions
Stefan Agner
2017-03-21
colibri_imx7: setup PMIC sleep mode configuration
Stefan Agner
2017-03-21
toradex: colibri_vf: fix memory initialization
Stefan Agner
2017-03-21
arm: imx6: toradex: add a splver cmd
Max Krummenacher
2017-03-16
colibri_imx7: implement board level USB PHY mode
Stefan Agner
2017-01-18
apalis/colibri_imx6: use independent USB PID for SPL
Stefan Agner
2017-01-11
apalis/colibri imx6: pf0100: reorder and cleanup message printing
Max Krummenacher
2017-01-11
colibri_imx6.c: remove sata references
Max Krummenacher
[next]