summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Expand)Author
2018-11-12Revert "[iot] Decrease panbell DDR frequency to 1600 MTS"Keun-young Park
2018-11-12[iot] Support authenticated unlockJi Luo
2018-11-12[iot] Load Trusty to different address for AIY 1G/3G ddr boardJi Luo
2018-11-12Use stdint for uboot.Yu Shan
2018-11-12Set different bootargs for imx8m_phanbell based on ram capacityfaqiang.zhu
2018-11-12Set VDD_ARM to 0.85v and turn off VDD_GPU and VDD_VPUfaqiang.zhu
2018-11-06MLK-20257 imx8qxp_arm2: Fix NAND boot reset issueYe Li
2018-11-02MLK-20163-03 board: imx8mq_evk: Refact the imx8mq dram init codeBai Ping
2018-11-02MLK-10163-01 imx8mq: Re-desine the dram_pll_init functionBai Ping
2018-11-02MLK-20160-2 imx8qm/qxp: Fix build error when OTG gadget is enabledYe Li
2018-11-02MLK-20051-2 imx8mq_arm2: Split DDR to two banks for iMX8MQ DDR4 ARM2Ye Li
2018-11-02MLK-20154-2 imx8mm_ddr3l_val: Add SPI NOR supportYe Li
2018-11-02MLK-19877-1: iMX8QXP: Add NAND SPL supportTeo Hall
2018-11-02MLK-20116-3 mx7ulp_evk: Remove GPIO codes for USB IDYe Li
2018-10-26MLK-20106: enable nand CE_1 in i.MX8MM EVK IOMUX settingHan Xu
2018-10-25MLK-20044 imx8mm_evk: update DDRC RFSHCTL3 for DDR4 timingBai Ping
2018-10-24MLK-20049-2 imx8mm_val: Add DDR3L validation board supportYe Li
2018-10-16iMX8QX mek SPL: Add FIT image loading supportAbel Vesa
2018-10-16iMX8QM mek SPL: Add FIT image loading supportAbel Vesa
2018-10-12MLK-19904 imx8mm_ddr4_evk: Update the mr value settingBai Ping
2018-10-10MLK-19881 imx8mq_arm2: Fix SPL issue to support uuuYe Li
2018-10-01MLK-19777-03: imx8mm_evk: Optimize the ddr4 init flowBai Ping
2018-10-01MLK-19777-02 imx8mm: rename lpddr4_timing variable to dram_timing.Bai Ping
2018-09-29MLK-19762 imx8mm: Fix i2c pad issue in SPLYe Li
2018-09-28MLK-19769-1 iMX8QM SPL: Add QSPI support for imx8qm_mekAbel Vesa
2018-09-28MLK-19770-1 iMX8QM SPL: board: imx8qm_mek: Add spl implementationAbel Vesa
2018-09-27MLK-19183-14: iMX8QXP SPL: Add ARM2 board supportTeo Hall
2018-09-20MLK-19645 mx6ulz_evk: Fix fdt_file variable issueYe Li
2018-09-20MLK-19625 mx6ulz_evk: Disable the FEC driver and support USB2NET dongleYe Li
2018-09-18MLK-19183-12 iMX8QXP SPL: Add QSPI support for imx8qxp_mekAbel Vesa
2018-09-17MLK-19599 imx8mm_ddr4_evk: Add NAND boot supportYe Li
2018-09-14MLK-19589 baord: imx6ulz: add imx6ulz supportBai Ping
2018-09-12MA-12669 imx8qm/qxp_mek: Guard TCPC codes with proper configLuo Ji
2018-09-11MLK-19541 imx8mm_evk: Add imx8mm DDR4 EVK CPU board supportYe Li
2018-09-07MLK-19483: i.MX6/7: pack qspi header with u-boot for i.MX6/7 qspi u-bootHan Xu
2018-09-03MLK-19380 imx8mq_evk: update the ddr controller QoS settingTom.zheng
2018-08-30MA-12552 Adjust SPL malloc pool and stack addressLuo Ji
2018-08-30MA-12551 [iot] Change configs to enable uuu on AIYLuo Ji
2018-08-21MLK-19263-2 imx8mq_evk: Adjust SPL malloc pool and stack addressYe Li
2018-08-21MLK-19223 arm: imx8mm: add MXC_XXX_CLK clock map for imx common codeHaibo Chen
2018-08-21MA-12244-1 [Android] Load HDMI RX firmware for imx8qmLuo Ji
2018-08-21[iot] Change VDD_DRAM to 0.9V which is valid in datasheetZhang Bo
2018-08-21[iot] Change VDD_3V3 to 3.1V and VDD_1V8 to 1.695VZhang Bo
2018-08-20[iot] Decrease panbell DDR frequency to 1600 MTSLuo Ji
2018-08-20[iot] Support 1G DDR AIY boardLuo Ji
2018-08-20MA-12124 [Android] Fix build warnings for u-bootLuo Ji
2018-08-20[iot] Move i2c_setup calls to board_initBraden Kell
2018-08-16MLK-19249-1 imx8mq_evk/arm2: Force DWC3 gadget to high speedYe Li
2018-08-16MLK-18502: board:imx8mm_evk enable tzascSilvano di Ninno
2018-08-14MLK-19218 imx8qm/qxp: spl: Fix build break in SPL buildYe Li
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 23:00:30 +0000