summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2018-08-07board: freescale: ls1012ardb: Add command to switch QSPI bankJagdish Gediya
Add command "boot_bank X" to switch the boot bank to either 1 or 2. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-08-03Add Beaglebone Enhanced supportKoen Kooi
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black, but with the following differences: * Gigabit capable PHY * Extra USB hub, optional i2c control * lps3331ap barometer connected over i2c * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c * 1GiB DDR3 RAM * RTL8723 Wifi/Bluetooth connected over USB Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-01Merge tag 'arc-updates-for-2018.09-rc2' of git://git.denx.de/u-boot-arcTom Rini
That's a set of prety minor changes and fixes for ARC. Among them: * Improvement in CREG GPIO driver used on ARC dev boards that allow us to re-use the driver for SPI's chip select * Enable SPI-flsh on AXS10x boards which allows to update U-Boot binary that gets loaded by boot-ROM * Fix accommodating always utilized unaligned access by GCC for ARC starting from 8.1.0
2018-07-31openrd: Mark as OrphanedTom Rini
After talking with Albert, mark these boards as orphaned as he no longer has one. Cc: Albert ARIBAUD <albert-u-boot@aribaud.net> Cc: Vagrant Cascadian <vagrant@debian.org> Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31ls1046ardb: Add qspi_spl variant to the MAINTAINERS fileTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31pico-pi: Add Otavio as maintainerTom Rini
Update the MAINTAINERS file to list Otavio Salvador as the maintainer for this board. Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: add MMC support for H6Icenowy Zheng
The Allwinner H6 SoC has 3 MMC controllers like the ones in A64, with the MMC2 come with the capability to do crypto by EMCE. Add MMC support for H6. EMCE support is not added yet. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: change ATF position for H6Icenowy Zheng
H6 has different SRAM A2 address, so the ATF load address is also different. Add judgment code to sunxi 64-bit FIT generation script. It will judge the SoC by the device tree's name. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31HSDK: Fixes and improvements in READMEAlexey Brodkin
1. Explained prerequisites for "make bsp-generate" command. 2. Cleaned-up duplicates Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31ARC: AXS10x/HSDK: Use our own version of mkimageAlexey Brodkin
Since U-Boot tools are being built anyways it's much nicer to use them instead of relying on some of them bein installed on build host (which might easily not be the case). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31ARC: AXS10x: add tool and make target to generate bspEugeniy Paltsev
AXS10x boards have preloader that reads SPI flash pages and searches special image header to fetch and load binary. Add tool, make target (bsp-generate) to generate update script and u-boot binary image with header for preloader. Also add script to default environment to apply updates. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-30Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-07-25 Highlights this time: - Many small fixes to improve spec compatibility (found by SCT) - Almost enough to run with sandbox target - GetTime() improvements - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-26armv8: ls1046ardb: Add falcon mode for for QSPI bootYork Sun
A new defconfig is introduced to support SPL boot from QSPI NOR flash. This is to support falcon mode for faster booting into Linux. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2080ardb: update copyright claimAlison Wang
This patch updates the copyright claim for the issues reported by legal review. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-25efi_loader: Rename sections to allow for implicit dataAlexander Graf
Some times gcc may generate data that is then used within code that may be part of an efi runtime section. That data could be jump tables, constants or strings. In order to make sure we catch these, we need to ensure that gcc emits them into a section that we can relocate together with all the other efi runtime bits. This only works if the -ffunction-sections and -fdata-sections flags are passed and the efi runtime functions are in a section that starts with ".text". Up to now we had all efi runtime bits in sections that did not interfere with the normal section naming scheme, but this forces us to do so. Hence we need to move the efi_loader text/data/rodata sections before the global *(.text*) catch-all section. With this patch in place, we should hopefully have an easier time to extend the efi runtime functionality in the future. Signed-off-by: Alexander Graf <agraf@suse.de> [agraf: Fix x86_64 breakage]
2018-07-24Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2018-07-25board: constify struct node_info arrayMasahiro Yamada
Add 'const' (also 'static' in some places) to struct node_info arrays to save memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-24ARM: AM3517-EVM: Update MaintainerAdam Ford
The previous e-mail pointing to Vaibhav Hiremath <hvaibhav@ti.com> is bouncing and has for some time. This updates it to myself and I work for Logic PD the manufacturer of the AM3517-SOM and EVM Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23m68k: m5253evbe: Remove this boardTom Rini
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDPAdam Ford
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: imx6: DHCOM i.MX6 PDK: ddr init for 32bit bus and 4GBit chipsLudwig Zenz
Support 1GIB + 2GIB DDR3 with 64bit bus width and 512MIB + 1GIB with 32bit bus width Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23ARM: imx6: configure ddrcode pins in spl DHCOM i.MX6 PDKLudwig Zenz
Preperation for conditional DDR3 initialization based on GPIO codes. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23Revert "ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK"Ludwig Zenz
This reverts commit a637fe6f27fd4c19ef9f43a5f871c244581422ac. The DDR DRAM calibration was enhanced by write leveling correction code. It can be used with T-topology now. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23pico-imx7d: README: Drop old instructions about secure modeOtavio Salvador
Our default config already has the secure mode supported, so the manual step is not required anymore. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: README: Use dfu-util to flash U-BootOtavio Salvador
The DFU allows a more user friendly use as the details where the bootloader is installed are abstracted. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Do not override addrmap5Fabio Estevam
The addrmap5 value is the same for the 512MB and 1GB variants, so there is no need to override it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add Falcon mode supportFabio Estevam
Falcon mode boots the kernel directly from SPL, without loading the full U-Boot. As pico-imx7d does not have a GPIO for selecting Falcon versus normal mode, enter in Falcon mode when the customer selects the CONFIG_SPL_OS_BOOT option in menuconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add SPL supportFabio Estevam
Convert pico-imx7d to SPL support. There are two variants of pico-imx7d SOMs: - One with 512MB of RAM - One with 1GB of RAM The 512MB module contains two Hynix H5TC2G63GFR-PBA. The 1GB module contains two Hynix H5TC4G63GFR-PBA. The RAM size is determined in runtime by reading GPIO1_12. While at it, also add USB Serial Download mode support as it is very helpful for loading SPL and u-boot.img via imx_usb_loader. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23colibri_imx7: improve DDR3 timingStefan Agner
This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-07-23colibri_imx7: add compatible string used in vanilla LinuxStefan Agner
Device trees from vanilla Linux do not specify a i.MX 7 specific compatible string. Make sure to set partitions also when booting upstream Linux. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23i.MX6: engicam: gpr_init can be called only for some architectureMichael Trimarchi
Fix an invalid usage of the gpr_init function for the imx6ul architecture Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-23mx7: Remove BMODE supportFabio Estevam
i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog: A watchdog timeout or software trigger will not reset the SOC"), so remove its support. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-07-23mx6cuboxi: Use mmc_get_op_cond() to check for an eMMCJon Nettleton
Previously we had just made broad assumptions with which of our boards had an eMMC or not even though this is a manufacturing time assembly option. This takes the guessing away and actually checks for the existence of an eMMC and sets up the has_emmc environment variable. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23mx6cuboxi: Add support for eMMC bootingJon Nettleton
The HB2 boards as well as rev 1.5 soms support eMMC booting as well as SDHC. Add the infrastructure to support booting these devices. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23board: toradex: add Colibri iMX6ULL supportStefan Agner
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23board: toradex: add new and upcoming SKUsStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-21rockchip: evb-rk3399: correct README for board bring upHeinrich Schuchardt
%s/rkflashtool/rkdeveloptool/ We are using rkdeveloptool not rkflashtool. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-07-21rockchip: rk3399: change boot_target based on u-boot, spl-boot-deviceKlaus Goger
The order distroboot searches for a boot.scr is fixed at compile time. To make BIOS_DISABLE work as expected and boot from mmc1 instead of mmc0 if enabled, we need to change the environment at runtime. Especially as commit: 482cf22333 ("rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE") enables the eMMC in U-Boot even if BIOS_DISABLE is active. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-20board/imgtec/boston: Add new defconfigs to the MAINTAINERS listTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-20Fix README for Khadas VIM boardLoic Devulder
Explicitly add 'python' call for 'acs_tool.pyc', to avoid failed execution on some OSes. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-20stm32mp1: add support for stm32mp157c-ev1 boardPatrick Delaunay
Add support of stm32mp157c-ev1, the evaluation board with pmic stpmu1 (ev1 = mother board + daughter ed1) with device tree. EV1 is the selected board by default in basic defconfig. PS: CONFIG_PINCTRL_FULL activation avoid to increase SYS_MALLOC_F_LEN (Early malloc usage: 2034) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-19board/BuR/brppt1: add makerule for generating production filesHannes Schmelzer
Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19board/BuR/brppt1: convert brppt1 boards to driver modelHannes Schmelzer
- add a devicetree for each variant (mmc, spi, nand) - drop unneeded code from board and bur/common - drop unneeded stuff from config header files - minor adaptions to be compliant with driver model (requesting gpio,..) - harmonize the commandset over all brppt1 targets Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19board/BuR/brppt1: implement more flexible boot processHannes Schmelzer
With this commit we do: - set the bootdelay in all brppt1 defconfigs to 0, this makes development easier, since we can break into serial console. - move CONFIG_BOOTCOMMAND from header file to defconfig - introduce b_mode variable for selecting the final boot-target. This b_mode represents the boot-switch, which can found on most b&r targets. On the brppt1 this boot-switch is derived from some gpio and the bootcounter within the RTC block, making it so possible to force a boot-target (as example for repair-case). - refactor the environment for booting new flexible way primary we want to get some bootscr.img within the mass-storage, this script then loads everything needed for the boot. For legacy reason we implement the t30lgcy#x boot targets, booting the already delivered linux-images. - make space for the cfgscr within mtdparts on brppt1_nand Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19board/BuR/common: refactor ft_board_setup(...)Hannes Schmelzer
On other OS, not one provided by B&R, it is not guaranteed that there are factory-settings within a devicetree. So we must not treat the absence of them as error. Further we've the fact that on different version of the device-tree files there are different namings of the factory-settings, we consider this with searching for an alternative name. changing things as following: - don't treat as error if the bootloader version cannot written into devicetree. - since the naming of the factory-settings are different in different versions of the provided device-tree we search for the alternate name "/fset" Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19board/BuR/brppt1: drop dead code (CONFIG_SPL_OS_BOOT)Hannes Schmelzer
The falcon mode was never used on this board, there is also no plan to use it. So drop this dead code. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19board/BuR/common: fix PMIC mpu-pll setupHannes Schmelzer
If a board-code calls the pmicsetup(u32 mpupll) with a mpupll value != 0 it wants to force some frequency with the value provided by mpupll. Setting up 1 GHz is wrong here. Nobody did take notice about that yet, since every board calls this function with zero. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-03 02:47:04 +0000