Age | Commit message (Collapse) | Author |
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Cap product id to avoid issues with a yet unknown one.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Used during manufacturing for setting the boot fuses.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
While at it fix whitespace issue.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
While at it remove unusable boot modes from the list.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Add pinmux and I2C setup call to register the Colibri I2C bus.
The fourth (I2C4) instance is used for the I2C bus defined in the
standard Colibri pinout. Use i2c dev 3 to switch to this bus.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
HW patch required. Connect RMII_CRS_DV - ENET1_RXC, remove R166
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Output 50MHz reference clock works, sending works but no reception.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Use get_ram_size() to autodetect up to 2Gbyte of RAM on rank 0.
If chips with two ranks would get stuffed one would have to set the size
of one rank in DDRC_ADDRMAP0.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
The Colibri iMX7 uses a different pmic
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Add empty callback now needed when CONFIG_LDO_BYPASS_CHECK is defined.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/8111e4d0cd81226899be637013048281e3c097b4
http://compass.freescale.net/livelink/livelink?func=ll&objId=234753630&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.13.inc is for sabre-AI
arik_r2_sdb_ddr3_528_1.13.inc is for sabresd
1.13<-1.12:
Change log:
1. Remove 20c4080
1.12<-1.10
Change log:
1. NoC register DDRCONF change to 0 which is compatible
for only CS0 is used on board
2. Change 2 values to compatible with our DDR aid script,
these two registers doesn’t have any effect on current system
tRPA = 0;
//this bit only used in DDR2 mode
tAOFPD/tAONPD=0x4;
//These register only works when MDPDC. SLOW_PD = 1 which is 0 in script
Test results:
One mx6qp-sdb and one mx6qp-ard board and one mx6qp-ard board passed
60 hours memtester stress teset.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 5fb08a4dcc7b8478fc4236b90ad8dc2190cf94e7)
|
|
According to the latest datasheet(Rev. B, 07/2015), the VDD_SOC_IN
standby voltage should be 1.05V and on i.MX6QP, we can use the PMIC
'APS' mode in standby. we add a 25mV margin to cover the IR drop and
board tolerance, so the standby voltage of VDD_SOC_IN should be
setting to 1.075V.
Signed-off-by: Bai Ping <b51503@freescale.com>
(cherry picked from commit 3c38fae6dafd3b90fae2598dcbedf6cb7aa6f6af)
|
|
on i.MX6QP SDB board, the SW1A/B/C regulator is used by
VDD_SOC_IN, the regulator of VDD_ARM_IN is SW2, the voltage
setting for VDD_ARM_IN should be corresponding to SW2. So fix
the regulator mismatch issue on i.MX6QP SDB board.
Signed-off-by: Bai Ping <b51503@freescale.com>
(cherry picked from commit 55a80625e81ea9ff5a5286f1d2183a2f0900f5c3)
|
|
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/963fbc75ef6d36e12819e81de23410749754e5ef
http://compass.freescale.net/livelink/livelink?func=ll&objId=234709279&objAction=browse&viewType=1
Main change: (SDB board ddr density is different)
1. tRFC is different with density, tXS/tXPR refers tRFC
Test Results:
2 MX6DP-SDB and 2 MX6QP-SDB boards passed overnight stress test.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 603b89c8990868c51b1546db4877d198358485ff)
|
|
ddr script update to 1.09:
http://compass.freescale.net/livelink/livelink?func=ll&objId=
234694528&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.09.inc is for sabre-auto board.
arik_r2_sdb_ddr3_528_1.09.inc is for sabre-sd board.
Changelog:
1. Optimize DQS duty cycle setting
2. Optimize ZQ PU/PD value
Test results:
2 ARD boards.
2 6QP-SDB boards.
1 6DP-SDB board.
All passed overnight memtester stress test.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit ba8dcef9d8e10e46130559ce6defe4411bd1d1a6)
|
|
According to the latest datasheet(Rev. C Draft 1, 10/2015) of
i.MX7D, change the VDD_SOC voltage to 0.95V in run mode, and
add a 25mV margin to cover the IR drop and board tolerance.
So setting VDD_SOC voltage to 0.975V.
Signed-off-by: Bai Ping <b51503@freescale.com>
|
|
IC team releases new DDR script "EVK_IMX6UL_DDR3L_400MHz_16bit_V1.2.inc",
update it to DCD and plugin for i.MX6UL 14x14 EVK board.
Updated items:
Removed:
0x020c4084
0x021B0858
Value changed:
0x020E027C
0x020E0280
0x021B0008
0x021B000C
0x021B0010
0x021B0018
0x021B08C0
The script versions of EVK board and Validation Board from the following link:
http://compass.freescale.net/livelink/livelink?func=ll&objId=234191407&obj
Action=browse&viewType=1
Test Results:
Two boards passed overnight memtester stress test.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
The PST bit can't be set too small which will cause performance drop.
Refer the commit for same issue on MX6UL 9x9 EVK, now fix it for 14x14 LPDDR2 ARM2
commit e1ca547d198dde94c4d8278c99499ec2d2008880
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
The actual memory size is 256MB not 512MB, otherwise it has a wrap
problem in memory and will cause memtester failed.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
enable bank interleave feature to improve the performance
downloaded from
http://compass.freescale.net/livelink/livelink?func=ll&objId=234609508&objAction=browse&viewType=1
Before:
$ /opt/fsl-samples/g2d/g2d_test
Width 1920, Height 1088, Format RGBA, Bpp 32
---------------- g2d blit performance ----------------
g2d blit time 15566us, 64fps, 134Mpixel/s ........
g2d blending time 20672us, 48fps, 101Mpixel/s ........
g2d blend-dim time 13616us, 73fps, 153Mpixel/s ........
---------------- g2d clear performance ----------------
g2d clear time 8433us, 118fps, 247Mpixel/s ........
---------------- g2d rotation performance ----------------
90 rotation time 15366us, 65fps, 135Mpixel/s ........
180 rotation time 15374us, 65fps, 135Mpixel/s ........
270 rotation time 15373us, 65fps, 135Mpixel/s ........
g2d flip-h time 15373us, 65fps, 135Mpixel/s ........
g2d flip-v time 15372us, 65fps, 135Mpixel/s ........
...
After:
$ /opt/fsl-samples/g2d/g2d_test
Width 1920, Height 1088, Format RGBA, Bpp 32
---------------- g2d blit performance ----------------
g2d blit time 2810us, 355fps, 743Mpixel/s ........
g2d blending time 4025us, 248fps, 518Mpixel/s ........
g2d blend-dim time 2740us, 364fps, 762Mpixel/s ........
---------------- g2d clear performance ----------------
g2d clear time 1846us, 541fps, 1131Mpixel/s ........
---------------- g2d rotation performance ----------------
90 rotation time 5234us, 191fps, 399Mpixel/s ........
180 rotation time 3176us, 314fps, 657Mpixel/s ........
270 rotation time 5248us, 190fps, 398Mpixel/s ........
g2d flip-h time 2765us, 361fps, 755Mpixel/s ........
g2d flip-v time 3179us, 314fps, 657Mpixel/s ........
...
Signed-off-by: Robby Cai <r63905@freescale.com>
|
|
The DDR initialization in plugin needs to update conformably with DCD.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
MMDC auto power saving timer can NOT be too small,
as enter/exit auto self-refresh mode too frequently
may introduce too many latency for MMDC access,
set it to 0x10, same as previous value on i.MX6.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
Add i.MX6QP SabreSD board support.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
The lpddr2 memsize of mx6ul_9x9_evk is 256MB, not 512M, so
the CS0_END should be 0x47, but not 0x4F.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
Disable PFuze3000 low power mode during standby mode, otherwise,
if the power consumption exceed the threshold, PFuze will reboot.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
Updated items:
memory set 0x307a0000 32 0x03040001 --> memory set 0x307a0000 32 0x01040001
This is just enable when LPDDR4 is enabled .
memory set 0x307a0064 32 0x0040005e --> memory set 0x307a0064 32 0x00400046
T_RFC_MIN this should be: RU(260ns*528Mhz)/2=69 (0x45)
memory set 0x307a00d0 32 0x00020001 --> memory set 0x307a00d0 32 0x00020083
PRE_CKE_X1024 be (500us*528Mhz/2)/1024 = 129, or 0x81
memory set 0x307a00d4 32 0x00010000 --> memory set 0x307a00d4 32 0x00690000
DRAM_RSTN_X1024 (200us*528Mhz)/1024=104, or 0x68
memory set 0x307a00e4 32 0x00090004 --> memory set 0x307a00e4 32 0x00100004
DEV_ZQINIT_X32 . Should be 16 clocks
memory set 0x307a0100 32 0x0908120a --> memory set 0x307a0100 32 0x09081109
T_FAW=(40ns*528Mhz)/2)=11
memory set 0x307a0104 32 0x0002020e --> memory set 0x307a0104 32 0x0007020d
tXPDLL=24ns*528Mhz=13clocks
File:
MX7D_EVK_DDR3_1GB_32bit.ds
Test result:
3 boards pass 2 days stress test.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
i.MX6UL-9x9-EVK board has PFUZE3000, so enable LDO
bypass support for this board.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
This mx7d 19x19 lpddr2 arm2 board is based on 19x19 lpddr3 arm2 board
with DDR changed to 512M LPDDR2. We added DDR script for LPDDR2 and
a new u-boot build target: mx7d_19x19_lpddr2_arm2_config
LPDDR2 script source: lpddr2_0_1.ds
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
The i.mx6ul 9x9 EVK shares the same base board with 6ul 14x14 EVK
with two main changes on CPU board:
1. Change to use pfuze 3000.
2. Use 256MB LPDDR2 memory.
This patch uses a macro CONFIG_6UL_9X9_LPDDR2 to distinguish the changes above,
basing on 14x14 EVK board level codes.
The new build target for the 9x9 EVK: mx6ul_9x9_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
In LPSR mode, wdog will be reset when resume, need
to disable wdog powerdown timer to avoid system
reset after timeout setting of 16 seconds.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
For imx7d 12x12-lpddr3-arm2 board, when system enters LPSR
mode and waked up, ARM core will be reset and uboot needs to be
executed first, the LPSR register contains a resume entery,
if this entry is non-zero, then it means it is a resume from
LPSR mode, uboot plug in code needs to make DRAM exit from
retention mode then jump to the entry directly, otherwise,
it is a cold boot, normal boot process will be performed.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
Since setup_waveform_file in different boards code have same implementation,
move setup_waveform_file to board common code. Also rename it to
board_setup_waveform_file
This patch also fix a bug when using flush_cache. We should pass
'waveform_buf' to flush_cache, but not a string named 'addr'.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|