summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2018-12-06armv8: ls1043ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls1043ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN and QE address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: ls1046aqds: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls1046aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: ls1046ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls1046ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2018-12-03MAINTAINERS: board: qcom: db820c: update email.Jorge Ramirez-Ortiz
Update email address Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-12-03Merge tag 'xilinx-for-v2019.01' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support
2018-12-03Merge tag 'signed-rpi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for rpi - 2018-12-03 A few Raspberry Pi specific changes this time: - Allow 2nd MMC device - Support RPi 3 Model A+ - Allow UUID to find filesystem
2018-12-03rpi: add 3 Model A+Jonathan Gray
Add Raspberry Pi 3 Model A+ to list of models, the revision code is 0xE according to the list on raspberrypi.org. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-03rpi: add URL of official revision code listJonathan Gray
Replace various third party lists of Raspberry Pi revision codes in a comment with the list on raspberrypi.org. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-03board: MCR3000: use new DM watchdogChristophe Leroy
This patch switches MCR3000 board to the new DM watchdog. The change in u-boot.lds is because MCR3000.o grows a bit with this patch and doesn't fit anymore below env_offset on some versions of GCC. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROLChristophe Leroy
Add mcr3000 device tree and activate CONFIG_DM and CONFIG_OF_CONTROL Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03arm: baltos: remove unused headerYegor Yefremov
OnRISC Baltos series uses SoM with tps65910 PMIC, so remove "power/tps65217.h" header inclusion. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: move the board to CONFIG_BLKYegor Yefremov
Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arc: devboards: Implement checkboard()Alexey Brodkin
This allows us to print nice board name on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: emsdp: Refactor register and bit accessesAlexey Brodkin
Instead of "base + offset" define all registers right away and access them later via direct defines. Generate bit masks with "BIT" macro. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: emsdp: Read real CPU clock value from hardwareAlexey Brodkin
We do real CPU clock measurement with help of built-in counters. Thus we may accommodate different real clock values that appear in different FPA images instead of relying on something hard-coded in the .dtb. And while at it make make SDIO base address define look similar to others with casting to "(void *)". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: Get rid of board-specific print_cpuinfo()Alexey Brodkin
Since we now do advanced CPU identification in generic ARC code there's no need to have per-board hardcoded data. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-11-30Merge tag 'pull-30nov18' of git://git.denx.de/u-boot-dmTom Rini
Fix sound on sandbox Convert TPM fully to DM Tidy up sandbox I2C emulation Add a 'make qcheck' target for faster testing A few other misc things (dropped the final patch which breaks clang for some reason)
2018-11-30mips: mt76xx: gardena-smart-gateway: Add factory data variable handlingStefan Roese
Some factory data is stored in the SPI NOR and needs to get extracted from there into U-Boot environment variables. This patch also includes a board-specific command "fd_write" to provide some dummy / default values for this factory-data in the SPI NOR flash. This should only be necessary for testing purposes though. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-30arm64: zynqmp: Wire mini-emmc1 configuration with zcu102Michal Simek
For testing purpose use zcu102 which has SD at controller 1 and this can be used for testing this mini configuration. U-Boot 2018.11-00279-gdc482e7ee092 (Nov 30 2018 - 10:22:56 +0100) Model: ZynqMP MINI EMMC1 Board: Xilinx ZynqMP DRAM: 512 MiB EL Level: EL3 MMC: sdhci@ff170000: 0 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Wire mini-emmc0 configuration with zcu100Michal Simek
For testing purpose use zcu100 which has SD at controller 0 and this can be used for testing this mini configuration. U-Boot 2018.11-00281-gc5d48466e76e (Nov 30 2018 - 10:41:05 +0100) Model: ZynqMP MINI EMMC0 Board: Xilinx ZynqMP DRAM: 512 MiB EL Level: EL3 MMC: sdhci@ff160000: 0 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Start usb ethernet gadget automaticallyMichal Simek
If only usb ethernet gadget is enabled it can start automatically. If more gagdets are enabled usb ethernet gadget can be bind by "bind /amba/usb1@ff9e0000/dwc3@fe300000 usb_ether" (on zcu100) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Add mini mtest configurationMichal Simek
This configuration is useful when you want to run small u-boot and perform DDR memory test to make sure that DDR is properly configured. It is use for board bringup because alternative u-boot memory tests is quite good. Configuration is running out of OCM. As is done for others mini configurations 0x80 bytes for variables is enough and only default variables are stored there. Alternative memtest is enabled and also 2GB of DDR via DTS files. Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init() from zcu102 for testing purpose. In case of size issue this can be moved to SPL configuration as is done for mini_qspi configuration but it is not a problem now. Log: U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100) Model: ZynqMP MINI Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 2 GiB EL Level: EL3 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogicTom Rini
Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support
2018-11-29tpm: Convert to use a device parameterSimon Glass
At present many TPM calls assume there is only one TPM in the system and look up this TPM themselves. This is inconsistent with driver model, which expects all driver methods to have a device parameter. Update the code to correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-29arm64: zynqmp: Enable SPL for mini qspi configurationMichal Simek
Wire up mini_qspi SPL with zcu102 for testing purpose. Normally mini u-boot runs with FSBL/SPL for certain board. Enabling SPL and configuration from zcu102 helps with testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29ARM: zynq: Wire SPL configuration for cse nor/nand targetsMichal Simek
These symlinks are here only for testing purpose where SPL is used for soc configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-28arm: MediaTek: add basic support for MT7623 boardsWeijie Gao
This adds a general board file based on MT7623 SoCs from MediaTek. As this u-boot is loaded by MTK proprietary preloader, there is no low level initializtion codes. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28arm: MediaTek: add basic support for MT7629 boardsRyder Lee
This adds a general board file based on MT7629 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-26ARM: chiliboard: remove dead !CONFIG_DM_SERIAL codeMarcin Niestroj
DM_SERIAL is selected by TARGET_CHILIBOARD, so there is no reason to keep code that will not be built. Remove it. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26ARM: chiliboard: move towards driver model and device-tree bootMarcin Niestroj
This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove ethernet platform data, as all details are in device-tree now. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26Merge git://git.denx.de/u-boot-riscvTom Rini
2018-11-26ARM: meson: factorize common code out amlogic's boardsJerome Brunet
Now we have moved all the Amlogic board support to common generic board code, we can move the identical board_init() and ft_board_setup() functions to weak functions into the board-common mach-meson file. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26board: amlogic: add support for S400 boardNeil Armstrong
The S400 board is the Amlogic AXG SoC reference board including : - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz - 1GB DDR4 SDRAM - 10/100 Ethernet - 2 x USB 2.0 Host - eMMC - Infrared receiver - SDIO WiFi Module - MIPI DSI Connector - Audio HAT Connector - PCI-E M.2 Connectors Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26ARM: meson: rework soc arch file to prepare for new SoCJerome Brunet
We are about to add support for the Amlogic AXG SoC. While very close to the Gx SoC family, we will need to handle a few thing which are different in this SoC. Rework the meson arch directory to prepare for this. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26ARM: rework amlogic configurationJerome Brunet
Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving the board Kconfig into the mach-meson Kconfig to make it easier to add new boards for a SoC architecture and add a custom config header or custom board handler for a platform. This drops the board CONFIGs and the duplicate boards configs headers in favor of a single meson64.h config header. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26board: amlogic: factorise gxbb boardsJerome Brunet
The nanopi-k2 and the odroid-c2 are similar enough to be supported by the same u-boot board. This change use odroid-c2 u-boot board for the nanopi-k2 as well. Dedicated defconfig are kept to customize the names and device tree. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26board: amlogic: move khadas-vim2 as q200 ref boardNeil Armstrong
The Khadas vim2 derive from amlogic s912 reference design (Q200). This patch moves the khadas-vim2 board support to a generic Q200 board, while keeping a dedicated defconfig to customize the names and device tree. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26board: amlogic: remove p212 derivativesJerome Brunet
The Khadas vim and the libretech aml-s905x-cc (aka Potato) derive from amlogic s905x reference design (P212). All the code in these board is a copy/paste from the p212, which is tedious to maintain. This change use p212 u-boot board for all these boards, while keeping a dedicated defconfig to customize the names and device tree. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26sandbox: Add a memory map to the sandbox READMESimon Glass
We have a few things in the memory map now, so add documentation for this to avoid confusion. Also note that it is possible to run all tests now. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26microblaze: Use standard functions for memory decodingMichal Simek
The standard function is less error prone than custom one. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26ARM: zynq: Guard zynq_help_text with CONFIG_SYS_LONGHELPMichal Simek
If SYS_LONGHELP is disabled the following warning is generated: board/xilinx/zynq/cmds.c:496:13: warning: ‘zynq_help_text’ defined but not used [-Wunused-variable] Normal way for fixing this is to guard the whole variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26arm64: zynqmp: Fix logic in CG/EG/EV detectionSiva Durga Prasad Paladugu
The VCU disable bit(8) in IP disable register of efuse is valid only if PL powered up and hence PL powerup status has to be considered while determining the CG part also. This patch considers the PL powerup status and ignores the VCU disable bit if PL not powered up. This fixes the issue of "unknown" id for CG parts if PL not powered up and VCU bit(8) is not set. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26riscv: qemu: clear kernel-start/-end in device tree as workaround for BBLLukas Auer
QEMU specifies the location of Linux (supplied with the -kernel argument) in the device tree using the riscv,kernel-start and riscv,kernel-end properties. We currently rely on the SBI implementation of BBL to run Linux and therefore embed Linux as payload in BBL. This causes an issue, because BBL detects the kernel properties in the device tree and ignores the Linux payload as a result. Work around this issue by clearing the kernel properties in the device tree before booting Linux. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-11-26riscv: qemu: detect and boot the kernel passed by QEMULukas Auer
QEMU embeds the location of the kernel image in the device tree. Store this address in the environment as variable kernel_start. It is used in the board-local distro boot command QEMU to boot the kernel with the U-Boot device tree. The QEMU boot command is added as the first boot target device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-11-26riscv: qemu: use device tree passed by prior boot stageLukas Auer
QEMU provides a device tree, which is passed to U-Boot using register a1. We are now able to directly select the device tree with the configuration CONFIG_OF_PRIOR_STAGE. Replace the hard-coded address in qemu-riscv with it. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-26Drop CONFIG_INIT_CRITICALBin Meng
This is now deprecated and no board is using it. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-11-20sandbox: cros_ec: exynos: Drop use of cros_ec_get_error()Simon Glass
This function is really just a call to uclass_get_device() and there is no reason why the caller cannot do it. Update sandbox and snow accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2018-11-20sandbox: README: use setenv ethrotate noHeinrich Schuchardt
If we want to control which network interface is actually used, we have to issue 'setenv ethrotate no'. If ethrotate is not set any interface may be used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20sandbox: README: setting environment variablesHeinrich Schuchardt
The command to set environment variables is setenv. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20Merge git://git.denx.de/u-boot-marvellTom Rini
- Clearfog GT-8K support added by Baruch / Raheeb - const and sizes cleanup (also in MIPS) from Baruch - Minor cleanup to db-88f6820 from Chris
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 05:43:14 +0000