| Age | Commit message (Collapse) | Author |
|---|
|
Substitute failing calls to fdt_fixup_msmc_ram function
by calling fdt_fixup_msmc_ram_k3 function which was implemented in
commit [1].
At functional level nothing changes.
[1] b6e669d7a393 ("arm: k3: Fix ft_system_setup so it can be enabled on any SoC")
Upstream-Status: Inappropriate
Commit [1] is already upstreamed and the new function is already used
when new boards were added.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
|
|
size when ECC is enabled
As there are few redundant functions in board/ti/*/evm.c files, pull
them to a common location of access to reuse and include the common file
to access the functions.
Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the
device tree and resize the available amount of DDR, if ECC is enabled.
Otherwise, fixup the device tree using the regular
fdt_fixup_memory_banks().
Modify fixup_ddr_driver_for_ecc() to make the function agnostic to the
number of DDR controllers present.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Update variable name_fdt for beagleboneai64 case with vendor prefix
to locate the dtb files. This prefix of vendor specific directory
is made to avoid naming issues and match the path on the latest kernel
versions.
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Link the default firmware in the environment variable for MCU R5 core1.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
|
|
Currently only the Main domain ESM is being initialized. For watchdog
reset we need the MCU ESM as well. Enbaling the same.
Signed-off-by: Keerthy <j-keerthy@ti.com>
|
|
Use the detected boardname to set the correct device tree blob.
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Use eeprom detection logic to detect if beaglebone-ai64 is detected.
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Update sec-cfg.yaml as well as the YAML schema to the latest security
configuration. Also update tifs-rm-cfg.yaml for J784S4 to the latest
resource management configuration.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
PMIC support is available for J7200X-PM2-SOM board, as such enable
support for it.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
J721E SoM and J7200 SoM has hyperflash connected to the hyperbus
interface, other platforms like J721E SK does not have a hyperflash
available in the platform, limit the hyperflash fixups to J721E and
J7200 SoM only.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
|
|
On few k3 platforms, due to load ordering of remote fw Linux kernel
is getting hang.
As WA, doremoteproc variable set to be 1 in u-boot.
This patch change default value of doremoteproc 1 for jacinto devices.
Cc: Manorit Chawdhry <m-chawdhry@ti.com>
Cc: Neha Francis <n-francis@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Apurva Nandan <a-nandan@ti.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Minas Hambardzumyan <minas@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Tested-by: Neha Malcom Francis <n-francis@ti.com>
|
|
All K3 SoCs use same set of args to load kernel for MMC. So move this to
common place to avoid duplication.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
As the size of tiboot3.bin has increased, the memory layout of the
bootloaders in eMMC and OSPI have been changed to accommodate this.
Therefore, introduce new dfu environment variables for combined boot images
and accordingly update them for J7200 by creating a new environment file.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
|
|
Modify rm-cfg.yaml to ensure it is latest and can boot to kernel.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Support added for HS and GP boot binaries for J7200.
tiboot3.bin, tispl.bin and u-boot.img: For HS-SE devices
tiboot3.bin_fs, tispl.bin and u-boot.img: For HS-FS devices
tiboot3.bin_unsigned, tispl.bin_unsigned and u-boot.img_unsigned: For GP
devices
It is to be noted that the bootflow followed by J7200 requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Added YAML configs for J7200
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
By providing entries in the binman node of the device tree, binman will
be able to find and package board config artifacts generated by
TIBoardConfig with sysfw.bin and generate the final image sysfw.itb.
It will also pick out the R5 SPL and sign it with the help of TI signing
entry and generate the final tiboot3.bin.
Entries for A72 build have been added to k3-j721e-binman.dtsi to
generate tispl.bin and u-boot.img.
Support has been added for both HS-SE(SR 1.1), HS-FS(SR 2.0) and GP images
In HS-SE, the encrypted system firmware binary must be signed along with
the signed certificate binary.
tiboot3.bin and sysfw-j721e_sr1_1-hs.itb: For HS-SE devices
tiboot3.bin_fs and sysfw-j721e_sr2-hs-fs.itb: For HS-FS devices
tiboot3.bin_unsigned and sysfw-j721e-gp-evm.itb: For GP devices
<filename>.bin/img: For HS devices
<filename>.bin_unsigned/img_unsigned: For GP devices
Intention of patch is to move signing and packaging to binman,
thus making makefile target only if binman is not enabled.
It is to be noted that the bootflow followed by J721E requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
sysfw.itb:
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Schema file in YAML must be provided in board/ti/common for validating
input config files and packaging system firmware. The schema includes
entries for rm-cfg, board-cfg, pm-cfg and sec-cfg.
Board config files must be provided in board/ti/<devicename> in YAML.
These can then be consumed for generation of binaries to package system
firmware. Added YAML configs for J721E in particular.
Signed-off-by: Tarun Sahu <t-sahu@ti.com>
[n-francis@ti.com: prepared patch for upstreaming]
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
ESM support is available for J7200X-PM2-SOM board, as such enable
support for it.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Since get_fdt_mmc is common, factor it out into mmc.env and remove
it from each platform env file. Use it in mmcloados but keep loadfdt
defined in case it is still used by some external uEnv.txt script.
Signed-off-by: Andrew Davis <afd@ti.com>
|
|
commit 77df85c48537faade5648b314baeff2259787ee8 upstream
Currently, name_fdt is not set for J7200, fix this so right DTB is
picked during boot.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
In Linux the ARM64 DTSs are stored in vendor directories to help organize
the files and prevent naming collisions. The deployed DTBs will mirror
this and so the vendor prefix should be added to the variable used to
locate these files.
Suggested-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
|
|
commit fce062d91ab5de832b1120787a4ff7730c73b47d upstream.
Move to using .env file for setting up environment variables for J721E
and J7200.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
commit 54ff4eeb59dd7f1b4141cdfdc1126d85fb03751f upstream.
Kconfig does not support using 'select' to select a 'choice'. A choice
can be configured by either setting the choice symbol to 'y' in a
configuration file or by setting a 'default' of the choice.
In board/ti/*/Kconfig the SOC_K3_* choice is already set to 'y' in their
corresponding configs/*_defconfig file. So remove selecting it.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Commit 37dc958947ed ("global_data.h: Change ram_top type to phys_addr_t")
changed type of ram_top member from ulong to phys_addr_t but did not
changed types in board_get_usable_ram_top() function which returns value
for ram_top.
So change ulong to phys_addr_t type also in board_get_usable_ram_top()
signature and implementations.
Fixes: 37dc958947ed ("global_data.h: Change ram_top type to phys_addr_t")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
While configuring SerDes, errors could be encountered, in these cases,
return instead of going ahead. This is will help in booting even if
configuration of SerDes fails.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
|
|
We want to keep all of the default values for SPL_LDSCRIPT in the same
place both for overall clarity as well as not polluting unrelated config
files.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
On j721e, its not possible to use OSPI0 and HBMC simultaneously as they
are muxed within the Flash Subsystem hence disable HBMC by default and
keep OSPI enabled. Bootloader will fixup DT when it detects HyperFlash
mux selection instead of OSPI.
Also updated detect_enable_hyperflash to use correct GPIO when checking
hypermux selection state:
* J7200 - hypermux sel connected to WKUP_GPIO0_6
* J721E - hypermux·sel·connected·to·WKUP_GPIO0_8
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
|
|
Initialization and power on operations of links have been moved under the
link device in the Sierra SerDes driver. Also, the UCLASS of
sierra_phy_provider has been changed to UCLASS_MISC.
Therefore, fix the probing of SerDes0 instance accordingly.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Georgi Vlaev <g-vlaev@ti.com>
|
|
Update the board_fit_config_name_match() to choose the right dtb
based on the board name read from EEPROM.
Also restrict multpile EEPROM reads by verifying if EEPROM is already
read.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
|
|
j721e-sk doesn't have any daughter cards, so disable daughter
card probing inside board_late_init() and spl_board_init() for
j721e-sk.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
|
|
Update setup_board_eeprom_env() to choose the right board name
for j721e-sk.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
|
|
J721E EVM has EEPROM populated at 0x50. J721E SK has EEPROM populated
at next address 0x51 in order to be compatible with RPi. So start
looking for TI specific EEPROM at 0x50, if not found look for EEPROM at
0x51.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
|
|
board_late_init(), setup_board_eeprom_env() and setup_serial() is
called only under CONFIG_BOARD_LATE_INIT, so guard these functions
with the same. Also, reorder these functions to place it under
single #ifdef
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
|
|
Add support for probing, initializing and powering, SerDes0 instance.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
|
|
Move TI maintainership to Tom.
Updated with the following commands:
find ./ -name MAINTAINERS | xargs sed -i s/"Lokesh Vutla <lokeshvutla@ti.com>"/"Tom Rini <trini@konsulko.com>"/g
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Tom Rini <trini@konsulko.com>
|
|
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.
Add a proper comment to simple_strtoul() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Move j721e document from board/ti/j721e/README to
doc/board/ti/j721e_evm.rst after converting it to RST format.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-20-kishon@ti.com
|
|
J7200
Add support for probing and configuring Torrent serdes on J7200.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-11-kishon@ti.com
|
|
Update build instructions and image formats based on HSM rearch. A new
DM image is added into the build, which gets executed right after R5
SPL finishes its job.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
|
|
Create a new CONFIG_K3_DDRSS option to select the common parts of the
k3-ddrss driver. Also introduce a choice that depends on the top level
option to select CONFIG_K3_J721E_DDRSS for j721e support, and update
corresponding Kconfig as required.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
|
|
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git
effective 2021-02-28.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Minor cleanup on K3 env variables
- Fix OSPI compatible for J721e
- Drop unused property in omap-usb2-phy
- Update Maintainer for am335x-guardian board.
|
|
Update detect_enable_hyperflash() to look for "ti,am654-ospi" compatible
to match the upstream DT node.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
On J7200 SoC OSPI and HypeFlash are muxed at HW level and only one of
them can be used at any time. J7200 EVM has both HyperFlash and OSPI
flash on board. There is a user switch (SW3.1) that can be toggled to
select OSPI flash vs HyperFlash.
Read the state of this switch via wkup_gpio0_6 line and fixup the DT
nodes to select OSPI vs HyperFlash
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
On J7200 SoC OSPI0 and HypeFlash are muxed at HW level and only one of
them can be used at any time. J7200 EVM has both HyperFlash and OSPI
flash on board. There is a user switch (SW3.1) that can be toggled to
select OSPI flash vs HyperFlash.
Read the state of this switch via wkup_gpio0_6 line and fixup the DT
nodes to select OSPI0 vs HyperFlash
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add initial A72 defconfig support.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
