summaryrefslogtreecommitdiff
path: root/board/rockchip
AgeCommit message (Collapse)Author
2023-02-28evb-rk3568: Update MAINTAINERS and documentationChris Morgan
Update the MAINTAINERS file to include the devicetree for the rk3568-evb1-v10 board. Also update Rockchip board docs to include information on building RK3568 based devices. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28board: rockchip: Add Radxa Compute Module 3 IO BoardJagan Teki
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-28arm64: dts: rockchip: rk3308: Add Radxa ROCK Pi S supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from Linux 6.2.0-rc7. ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a, - 256MB/512MB DDR3 RAM - SD, NAND flash (optional on board 1/2/4/8Gb) - 100MB ethernet, PoE (optional) - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module - USB2.0 Type-A HOST x1 - USB3.0 Type-C OTG x1 - 26-pin expansion header - USB Type-C DC 5V Power Supply Linux commit commit for the same, <2e04c25b1320> ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-09Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORTSimon Glass
This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2022-12-19rockpi4: board: Add firmware image information for capsule updatesSughosh Ganu
Add information that will be needed for enabling the UEFI capsule update feature on the RockPi4 boards. With the feature enabled, it would be possible to update the idbloader and u-boot.itb images on the RockPi4B and RockPi4C variants. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-10-19rockchip: rk3399: Add EAIDK-610 supportAndy Yan
Specification - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 work in otg mode - 12V DC Power supply The dts file is sync from linux-next[0]. [0]:https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18board: rk3288: add more DT files to MAINTAINERSJohan Jonker
A number of rk3229/rk3288 DT files are synced from Linux. Add a maintainer to look after them and to help with review and testing. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30board: dts: rockchip: Add NanoPi M4BAlexandre Vicenzi
Add initial support for NanoPi M4B, a minor revision of the original NanoPi M4. Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4: "arm64: dts: rockchip: Add NanoPi M4B board" (sha1: c7b03115003f7f337ab165542cee37148cf30a8a) Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com> Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
2021-03-30arm64: rk3399: Add support NanoPi R4sXiaobo Tian
NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support, including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port. port.It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1]. [1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6 Signed-off-by: xiaobo <peterwillcn@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-21rockchip: rk3328: Add support for FriendlyARM NanoPi R2SDavid Bauer
This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-09-16rockchip: rv1108: use correct API for board callbackKever Yang
Use board_early_init_f() instead of mach_cpu_init() for board, the board_early_init_f() is used for board init and after dm_initf, while the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able to use syscon API). Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base") Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add Radxa ROCK Pi 4C supportJagan Teki
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07arm64: dts: rockchip: Add Radxa Rock Pi N10 initial supportJagan Teki
Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has - VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC. So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files. rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1. Tested - ROCK PI N10 Model B - ROCK PI N10 Model C - Boot from SD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3328: add rock-pi-e-rk3328_defconfig fileb.l.huang
This commit add the default configuration file and relevant description for rock-pi-e board Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-06-02rockchip: Remove ARCH= references from documentationTom Rini
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Acked-by: Kever Yang <kever.yang@rock-chips.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-01rockchip: rk3399: Add Nanopi M4 2GB board supportDeepak Das
commit b2f5da9dd068 ("rockchip: rk3399: Add Nanopi M4 board support") added support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM. This patch adds another variant of NanoPi M4 board with Dual-Channel 2GB DDR3-1866 RAM. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-01rockchip: rk3328: Add support for ROC-RK3328-CC boardChen-Yu Tsai
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit card size development board based on the Rockchip RK3328 SoC, with: - 1/2/4 GB DDR4 DRAM - eMMC connector for optional module - micro SD card slot - 1 x USB 3.0 host port - 2 x USB 2.0 host port - 1 x USB 2.0 OTG port - HDMI video output - TRRS connector with audio and composite video output - gigabit Ethernet - consumer IR receiver - debug UART pins The ROC-RK3328-CC has the enable pin of the SD card power switch tied to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is muxed by default. SDMMC0_PWREN is an active high signal controlled by the MMC controller, however the switch enable is active low, and pulled low (enabled) by default to make things work on boot. As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable power to the card. The default GPIO state for the pin is pull-down and input, which doesn't require extra configuration when paired with the external pull-down and active low switch. Deal with this by enabling regulator support in SPL, and setting "u-boot,dm-spl" for the regulator and other device nodes needed for muxing the pin. The device tree file is synced from the Linux kernel next-20200324. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: evb-rv1108: Use syscon API to get grf baseKever Yang
Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06rockchip: config: add support for firefly-px30 boardKever Yang
This is a core board named Core-PX30-JD4 with a mainboard from Firefly, name it as firefly-px30 for now. This board can re-use the dts of PX30, the only difference is the UART IO, the firefly use UART2 M1 while evb use UART2 M0. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02common: Move old EEPROM functions into a new headerSimon Glass
These functions do not use driver model but are still used. Move them to a new eeprom.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-17rockchip: dts: tinker: Add tinker-s board supportMichael Trimarchi
Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17board: rockchip: Add rk3308 evb supportAndy Yan
Add support for rk3308 evaluation board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: split rockpro64 out of evb_rk3399Vasily Khoruzhick
rockpro64 needs to setup I/O domains in order for USB to work in u-boot. Since we currently don't have a driver to do that, split it into its own board file and initialize I/O domains here. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfigJagan Teki
roc-rk3399-pc_defconfig is committed in below commit <8a681f4c5aa15db51ad0209734859c9fe7c29cfd> ("rockchip: rk3399: Add ROC-RK3399-PC support") which doesn't follow the existing defconfigs on rk3399. So, rename as followed with other rk3399 defconfigs. Cc: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: add px30-evb boardHeiko Stuebner
The px30 evb is an evaluation board for the px30 together with a dsi- connected display. This adds board and config files for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10rockchip: rk3399: Add Leez P710 supportAndy Yan
Specification - Rockchip RK3399 - LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - TYPE-C Power supply Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1: "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC" (sha1: fc702ed49a8668a17343811ee28214d845bfc5e6) Signed-off-by: Andy Yan <andyshrk@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23rockchip: rk3288: remove fennec board supportKever Yang
Since there is no one using this board, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19rockchip: rk3399: Add ROC-RK3399-PC supportLevin Du
Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-11env: Drop environment.h header file where not neededSimon Glass
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-05arm64: dts: rockchip: Add support for Khadas Edge-CaptainNick Xie
Add devicetree support for Khadas Edge-Captain. Khadas Captain is the carrier board for Khadas Edge. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas Edge-VNick Xie
Add devicetree support for Khadas Edge-V. Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas EdgeNick Xie
Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rv1108: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: init vbus regulator in board_early_init_f()Kever Yang
Handle per-board init in board_early_init_f() and use the common board_init() for per-platform board init later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-26 08:09:01 +0000