summaryrefslogtreecommitdiff
path: root/board/gateworks
AgeCommit message (Collapse)Author
2014-07-30Add board MAINTAINERS filesMasahiro Yamada
We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30kconfig: add board Kconfig and defconfig filesMasahiro Yamada
This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-06-06imx: ventana: switch to SPLTim Harvey
Switch to an SPL image. The SPL for Ventana does the following: - setup i2c and read the factory programmed EEPROM to obtain DRAM config and model for board-specific calibration data - configure DRAM per CPU/size/layout/devices/calibration - load u-boot.img from NAND and jump to it This allows for a single SPL+u-boot.img to replace the previous multiple boa configurations. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06imx: ventana: auto-configure for IMX6Q vs IMX6DLTim Harvey
use the new iomux function and a macros to create a multi-dimensional array of iomux values without duplicating the defintions. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06imx: ventana: split read_eeprom into standalone fileTim Harvey
Split the read_eeprom function out so that it can be shared (ie with SPL) Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09imx: ventana: add HDMI and LVDS display capabilityTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09imx6: ventana: fix system-serial dt propertyTim Harvey
Fix typo in setting of system-serial property causing the prop len to be off by 1. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09ventana: Add support for the LTC3676 PMICTim Harvey
The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1 and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar values for the LTC3676 are board-specific as they relate to a resistor devider chosen by the board design. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09ventana: use non-generic pfuze100 initTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-04-28ventana: remove redundant includeTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-04-28ventana: fixed comments in eeprom headerTim Harvey
Fix several invalid comments regarding the EEPROM structure used by Gateworks Ventana boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-03-12ventana: Add Gateworks Ventana family supportTim Harvey
Gateworks Ventana is a product family based on the i.MX6. This patch adds support for all boards in the Ventana family. Where possible, data from the boards EEPROM is used to determine various details about the board at runtime. Signed-off-by: Tim Harvey <tharvey@gateworks.com>