summaryrefslogtreecommitdiff
path: root/board/freescale/mx53_smd
AgeCommit message (Expand)Author
2012-09-12ENGR00210918-2 cleanup android support, build pass all boardsZhang Jiejing
2012-09-05ENGR00175981-1 mx53 smd: add CPU 1.2GHz configurationLily Zhang
2012-09-05ENGR00163697 - FEC : Adjust MX53 Network stream throughput.Fugang Duan
2012-09-05ENGR00163704: MX5X: add i2c recovery function in board_lateinit.Zhang Jiejing
2012-09-05ENGR00163370 Android: uboot: mx53_smd fix warnning messageZhang Jiejing
2012-09-05ENGR00162717 mx53_smd/mx53_loco DA9053: reset da9053 i2c and add dummy writeWayne Zou
2012-09-05ENGR00162491 Android: MX53_SMD: enter recovery mode by key.Zhang Jiejing
2012-09-05ENGR00155891 : Fix reboot stress test failed issueRobin Gong
2012-09-05ENGR00158184 mx53 smd: use highest value for unknown board revision valueWayne Zou
2012-09-05ENGR00157538 remove VDIG_PLL setting in plug-in codeLily Zhang
2012-09-05ENGR00156389: turn off child clocks before reconfigure perclk_rootTerry Lv
2012-09-05ENGR00156098 mx53_smd/mx53_loco: DA9053 I2C SDA stuck low issue on bootupWayne Zou
2012-09-05ENGR00139254: Enable MX6Q Uboot Splash ScreenSandor Yu
2012-09-05ENGR00155283: Set dpgdck0_2_en to 0 when freq is lower than 300MHzTerry Lv
2012-09-05ENGR00154666-2: Align u-boot mmc command with communityTerry Lv
2012-09-05ENGR00155284 mx53_smd: move I2C access to board_init_late for system hang issueWayne Zou
2012-09-05ENGR00154672: Change to use rom plugins for mx53 boardsTerry Lv
2012-09-05ENGR00155240 mx53_smd: Fix a bug that hangs on printf() in board_initWayne Zou
2012-09-05ENGR00155138 mx53_smd/mx53_loco: Add i2c retry to fix DA9053 i2c NAK issueWayne Zou
2012-09-05ENGR00151310 mx53 smd: force warm reset as cold resetLily Zhang
2012-09-05ENGR00151695 mx53 ddr3: update ESDREF and MR0Lily Zhang
2012-09-05ENGR00151187 MX53 SMD: Kernal stopped Usb driver after reseting in stop modeWayne Zou
2012-09-05ENGR00144224: MX53: Add MMU mapping for all peripheralsTerry Lv
2012-09-05ENGR00143457: Don't let ROM copy .bss sectionJason Liu
2012-09-05ENGR00142497 Android: MX53_SMD: check eMMC and SD recovery file.Zhang Jiejing
2012-09-05ENGR00142322: mx53-smd: spi nor: can't erase 0x200000 sizeTerry Lv
2012-09-05ENGR00141363: change mx53 uart clk parent to pll2Jason Chen
2012-09-05ENGR00141129: Add m25p32 spi_nor support for mx53_smdTerry Lv
2012-09-05ENGR00140982 MX53 Increase VDDGP to 1.25V for 1 GHzAnish Trivedi
2012-09-05ENGR00140825: Add mx53 to2.1 chip id recognitionTerry
2012-09-05ENGR00139747: Read fuse to distinguish between mx53 revA and revBTerry Lv
2012-09-05ENGR00139924 mx53 smd &loco: set bootup vdd GP to 1.2vZhou Jingyu
2012-09-05ENGR00138040-3 Protect splashimage related stuffs by configLiu Ying
2012-09-05ENGR00137552 MX53: increase VDDGP as 1.2V for 1GHZLily Zhang
2012-09-05ENGR00137894-6 MX53 SMD:Support splashimageLiu Ying
2012-09-05ENGR00137604: Change PLL4 to 455MHz for mx53Terry Lv
2012-09-05ENGR00137642 MX53 Uboot Align DDR3 script for Loco and SMD boardsAnish Trivedi
2012-09-05ENGR00136075 MX53: Add SMD board supportLily Zhang
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-29 22:39:12 +0000