index
:
u-boot-toradex.git
2011.12-colibri_vf
2014.04-toradex
2014.10-toradex
2014.10-toradex-next
2015.04-imx7-1.1.0_ga-toradex-next
2015.04-toradex
2015.04-toradex-next
2016.11-toradex
2016.11-toradex-next
colibri
colibri-next
colibri_vf
toradex_2019.07
toradex_2019.07-next
toradex_2020.07
toradex_imx6
toradex_imx_lf_v2022.04
toradex_imx_v2017.03_4.9.123_imx8mm_ga-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta1-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta2-bring_up
toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringup
toradex_imx_v2018.03_4.14.78_1.0.0_ga-bringup
toradex_imx_v2018.03_4.14.98_2.3.0_bringup
toradex_imx_v2020.04_5.4.24_2.1.0
toradex_imx_v2020.04_5.4.70_2.3.0
toradex_ti-u-boot-2021.01_bringup
toradex_ti-u-boot-2023.04
U-Boot bootloader for Apalis and Colibri modules
Marcel Ziswiler
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
board
/
boundary
Age
Commit message (
Expand
)
Author
2013-07-17
ddr cfg: DRAM_RESET needs 0x00020030
2013.04-boundary-imx6-ts1
Troy Kisky
2013-07-03
nitrogen6x: wait 100 us after phy reset
Troy Kisky
2013-07-03
ksz9031: change rx_ctl/tx_ctl pad skew delay to min
Troy Kisky
2013-07-02
Refix upgrade erase bug
Robert Winkler
2013-06-18
imx: Update the U-Boot upgrade script, remove duplicates
Robert Winkler
2013-06-18
Add support for 1280x800 lvds jeida screen
Robert Winkler
2013-06-17
h: simplify display selection
Eric Nelson
2013-06-17
oc/nit6xlite: fix WiFi/BT pads and GPs
Robert Winkler
2013-06-17
boundary boards: configure SD2 pads for SDIO on USDHC2 (CLK/CMD/DAT0-3)
Eric Nelson
2013-06-17
Add ocsolo1g board
Eric Nelson
2013-06-17
Initial addition of Boundary H board
Robert Winkler
2013-06-17
6x_bootscript_android: add no_console_suspend
Eric Nelson
2013-06-17
imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
Robert Winkler
2013-06-17
Add splash screen support via loading from flash
Robert Winkler
2013-06-17
6x_bootscript_jb: Jelly-bean wants 24 bits per pixel
Robert Winkler
2013-06-17
6x_bootscript_android: force hardware=freescale
Robert Winkler
2013-06-17
nit6xlite android bootscript: Allow override for common panels
Eric Nelson
2013-06-17
nitrogen6x/nit6xlite: Always configure RGB pads
Eric Nelson
2013-06-17
Add Boundary Devices Nit6xLite board (nit6xlite)
Robert Winkler
2013-06-17
Add Boundary Devices OC boards (ocsolo, ocquad)
Robert Winkler
2013-06-17
nitrogen6x: add micrel phy ksz9031 option
Troy Kisky
2013-06-17
6x_bootscript_android: fix fbmem argument
Eric Nelson
2013-06-17
imx: nitrogen6x: Change upgrade script to always erase enough
Robert Winkler
2013-06-03
mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal
Andrew Gabbasov
2013-04-28
imx: iomux-v3: Include PKE and PUE to pad control pull definitions
Benoît Thébaudeau
2013-04-25
nitrogen6x: Setup CCM_CCOSR register
Fabio Estevam
2013-04-03
mx6: Fix get_board_rev() for the mx6 solo case
Fabio Estevam
2013-04-03
mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board
Abbas Raza
2013-03-15
nitrogen: Use unsigned long to specify the total RAM size
fabio.estevam@freescale.com
2013-03-13
Add Boundary Devices Nitrogen6X boards
Eric Nelson
