summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2020-09-18MLK-24786 imx8dxl_ddr3_evk: Add UUU support to second USB portYe Li
2020-09-16MLK-24792 imx8dxl: Rename iMX8DXL DDR3 VAL to EVK boardYe Li
2020-09-15MLK-24766-6 arm64: dts: imx8qxp-val: enable lpspi0 supportClark Wang
2020-09-15MLK-24766-5 arm64: dts: imx8dxl: enable lpspi3 supportClark Wang
2020-09-15MLK-24766-4 arm: dts: imx7ulp: enable lpspi3 supportClark Wang
2020-09-15MLK-24766-3 imx7ulp-clk: add lpspi clk enable functionClark Wang
2020-09-08MLK-24750-1 spl: Allow iMX7/8/8M to overwrite spl_board_boot_deviceYe Li
2020-09-07MLK-24720 imx8mq_ddr4_val: Change to use iMX8M DDR driverYe Li
2020-09-05MLK-24616 imx8: misc: Fix hardcoded LPUART0 for LPCGYe Li
2020-08-31MA-17788 Boot time refine for automotiveJi Luo
2020-08-18MLK-24510: board: freescale: imx8mm ddr4 audio board 2.0Adrian Alonso
2020-08-14MLK-24504 DTS: imx8dxl: Fix GPIO seq ID issueYe Li
2020-08-14MLK-24492 mx7 Align IOMUX GRP offset with mx6Silvano di Ninno
2020-08-13MLK-24474: Add command to set SECO FIPS modeFranck LENORMAND
2020-08-11MLK-24482 imx8dxl: Update chip revision to recognize A1Ye Li
2020-08-10MLK-24479 DTS: imx8dxl-evk: Update and enable PCIEYe Li
2020-08-10Revert "LF-1936 imx8mq: remove dead switch"Peng Fan
2020-08-10Revert "LF-1934 imx8mm: remove dead switch"Peng Fan
2020-08-10Revert "LF-1928 imx7ulp: scg: remove dead switch"Peng Fan
2020-08-10LF-1937 imx8mq: fix SSCG_PLL_REFCLK_SEL_xPeng Fan
2020-08-10LF-1930 imx8mq: fix FRAC_PLL_REFCLK_SEL_MASKPeng Fan
2020-08-10LF-1936 imx8mq: remove dead switchPeng Fan
2020-08-10LF-1934 imx8mm: remove dead switchPeng Fan
2020-08-10LF-1928 imx7ulp: scg: remove dead switchPeng Fan
2020-08-10LF-1963 imx7: ccm: correct target interface numPeng Fan
2020-08-04LF-1861 imx8m: clock: Fix ecspi1 clock settingYe Li
2020-08-04LF-1873 imx8: snvs_security: Fix dead code in apply_tamper_pin_list_configYe Li
2020-08-04LF-1876 imx8: snvs_security: Fix dead code in apply_snvs_dgo_configYe Li
2020-08-04LF-1895 imx8: Fix unsigned compared with negative valueYe Li
2020-08-04LF-1866 imx: nandbcb: Fix potential overflow in nandbcb_set_boot_configYe Li
2020-08-04LF-1868 imx: nandbcb: Fix potential overflow in fill_dbbt_dataYe Li
2020-08-04LF-1867 imx: nandbcb: Fix resource leak in read_fcbYe Li
2020-08-04LF-1865 imx: nandbcb: Fix resource leakYe Li
2020-08-04LF-1864 imx: nandbcb: Fix uninitialized variableYe Li
2020-08-03MLK-24461 DXL: Enable second USB 8DXLFrank Li
2020-08-05LF-1856: imx8: solve the problem of "Incorrect deallocator used"Alice Guo
2020-08-01MLK-24451 imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 supportYe Li
2020-07-22MLK-24434 imx8mn: Add low drive mode support for DDR4/LPDDR4 EVKYe Li
2020-07-20MLK-24426-2 iMX8DXL: Print the V2X FW build infoYe Li
2020-07-20MLK-24426-1 misc: imx8: Update SCFW API to get V2X build infoYe Li
2020-07-16MLK-24395: dts: arm: imx8mm ab2: add fec phy int gpio padAdrian Alonso
2020-07-16MLK-24394-1: dts: arm: imx8mm ab2: fixed regulator supportAdrian Alonso
2020-07-16MLK-24392: dts: arm: imx8mm ab2: fix flexspi flash0 propertiesAdrian Alonso
2020-07-16MLK-24406 arm: dts: imx8dxl: limit the max frequency to 100MHz for SD cardHaibo Chen
2020-07-07MLK-24379-2 imx8: Configure SNVS driver to u-boot onlyYe Li
2020-07-07MLK-24379-1 imx8: Fix build warnings in SNVS tamper driverYe Li
2020-07-07MLK-24377 imx8mq: Remove clearing mfg prot private keyYe Li
2020-06-24MLK-23834: Fix SNVS configuration of AT polynomialsFranck LENORMAND
2020-06-24MLK-23834: Add gpio_conf command to configure GPIOFranck LENORMAND
2020-06-24MLK-23834: handle tampers which are not GPIOFranck LENORMAND
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-27 04:12:54 +0000