summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06arm: mach-omap2: cache: Explicitly enable I cacheLokesh Vutla
omap-common cache enabling sequence relies on cpu_init_cp15() (inside start.S) for enabling I-caches. But cpu_init_cp15() can be skipped if CONFIG_SKIP_LOWLEVEL_INIT is defined. So enable I-caches if not enabled already. Debugged-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-02ARM: rmobile: Contain CONFIG_ARCH_RMOBILE_BOARD_STRINGMarek Vasut
Pull the symbol from the boards and zap struct rmobile_sysinfo as they are rather useless. The entire purpose of that whole machinery was to print board name in the CONFIG_ARCH_RMOBILE_BOARD_STRING. Do that in a far simpler and more contained manner. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02ARM: rmobile: Convert CONFIG_ARCH_RMOBILE_BOARD_STRING to KconfigMarek Vasut
Convert the symbol to Kconfig, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-30Merge git://git.denx.de/u-boot-imxTom Rini
2018-04-28spl: ti: Avoid preloader_console_init if !CONFIG_SPL_SERIAL_SUPPORTAlex Kiernan
If CONFIG_SPL_SERIAL_SUPPORT is disabled then the build fails because serial_init is undefined. Guard preloader_console_init() appropriately to fix this. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-28arm: move SYS_ARCH_TIMER to KConfigAndre Przywara
SYS_ARCH_TIMER guards the usage of the ARM Generic Timer (aka arch timer) in U-Boot. At the moment it is mandatory for ARMv8 and used by a few ARMv7 boards. Add a proper Kconfig symbol to express this dependency properly, allowing certain board configuration to later disable arch timer in case there are any problems with it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [tuomas: rebase + fix conflicts and resync with moveconfig & use select] Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2018-04-28distro: use imply to enable DISTRO_DEFAULTS as SoC defaultMasahiro Yamada
The default of DISTRO_DEFAULTS is messy. Using the 'imply' keyword is equivalent and cleaner. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-28powerpc: fix typo in kgdb.cHeinrich Schuchardt
%s/alingment/alignment/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-27clang: Update documentationTom Rini
As of clang-5.0, things have changed a bit. First, we cannot automatically guess -target values as if we do not pass one with CC then cc-option will fail. Second, to disable movt/movw relocations the argument has become -mno-movt. Related to the target part, we cannot use arm-none-eabi as that ends up being too generic of an ARM target for things like say rpi_3_32b to work. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27ARM: mxs: support full SPL frameworkMans Rullgard
This allows using the full SPL framework on mxs devices. In this mode, the u-boot.sb image loaded by the boot ROM contains only the SPL which then loads U-Boot proper or a kernel in falcon mode. Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-04-27ARM: mxs: move spl dataMans Rullgard
With full SPL enabled, the loaded image overwrites the mxs_spl_data location. Moving it a slightly lower address fixes this. Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-04-27ARM: spl: include arm/thumb glue sectionsMans Rullgard
When building in Thumb mode, the linker might generate mode switching stubs in .glue sections. Include these in the final link. Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-04-27ARM: arm926ejs: fix lowlevel_init callMans Rullgard
The code attempts to preserve the value of LR by storing it in R12/IP across the lowevel_init() call. However, this register is not saved by the callee. Use a register that guaranteed to be preserved instead. Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-04-27ARM: mxs: make lowlevel_init() weakMans Rullgard
With the full SPL framework enabled, lowlevel_init() is required. Make the empty stub weak so boards can override it. Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-04-26Merge git://git.denx.de/u-boot-shTom Rini
2018-04-26ARM: rmobile: Update E2 AltMarek Vasut
The E2 Alt port was broken since some time. This patch updates the E2 Alt port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update M2-N GoseMarek Vasut
The M2-N Gose port was broken since some time. This patch updates the M2-N Gose port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update H2 LagerMarek Vasut
The H2 Lager port was broken since some time. This patch updates the H2 Lager port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26imx6ul: opos6ul: in Serial Downloader boot mode use ymodemSébastien Szymanski
When booting in Serial Downloader mode load the U-Boot image using ymodem. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-04-26imx6ul: opos6ul: add SPL_DM supportSébastien Szymanski
Since commit commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support makes the board boot again. Fixes: commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-04-26arm,imx6: fix PAD_CTL_SPEED_LOW constantMark Jonas
For most i.MX6 processors the PAD_CTL_SPEED_LOW constant is the same. Only the i.MX6 SoloLite is an exemption. So far the code did not consider that. Additionally, for a few i.MX6 processors the code used the wrong value for the constant. This patch fixes the PAD_CTL_SPEED_LOW constant for: - i.MX6 Solo [1] - i.MX6 DualLite [1] - i.MX6 Dual [2] - i.MX6 Quad [2] - i.MX6 DualPlus [3] - i.MX6 QuadPlus [3] Before, it was already correct for: - i.MX6 SoloLite [4] - i.MX6 SoloX [5] - i.MX6 UtraLite [6] - i.MX6 ULL [7] [1] https://www.nxp.com/docs/en/reference-manual/IMX6SDLRM.pdf [2] https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf [3] https://www.nxp.com/docs/en/reference-manual/iMX6DQPRM.pdf [4] https://www.nxp.com/docs/en/reference-manual/IMX6SLRM.pdf [5] https://www.nxp.com/docs/en/reference-manual/IMX6SXRM.pdf [6] https://www.nxp.com/docs/en/reference-manual/IMX6ULRM.pdf [7] https://www.nxp.com/docs/en/reference-manual/IMX6ULLRM.pdf Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-04-25rockchip: enable SYS_NS16550 for all SoCs by defaultKever Yang
All rockchip SoCs can use ns16550 driver, enable it for all and set SYS_NS16550_MEM32 for all SoCs. Version-changes: 2 - use imply instead of select Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk322x: update MACRO for back-to-bromKever Yang
The MACRO has been update after: ee14d29 rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL We need to update the C code for it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25arm: rockchip: make_fit_atf: remove unneeded importsPatrick Uiterwijk
These imports are entirely unused in the entire script. Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: use DM timer instead of rk_timerKever Yang
Disable rk_timer as SYS timer and use DM timer instead, so that we can get a better timer framework, the rk_timer is going to be clean after we conver to use DM timer or ARM arch/generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: add timer3 nodeKever Yang
Add dts node for timer3. Because of the rockchip timer can only KNOWN "dtd_rockchip_rk3368_timer" with OF_PLATDATA enable, so we override its compatible to "rockchip,rk3368-timer". Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: add -u-boot.dtsi for rock-rk3188Kever Yang
We should a -u-boot.dtsi for those config need by U-Boot only, and other part sync with kernel. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-23Merge git://git.denx.de/u-boot-uniphierTom Rini
2018-04-24ARM: dts: uniphier: drop u-boot, dm-pre-reloc from SD/eMMC clock nodeMasahiro Yamada
Now that the SD/eMMC driver does not use the clock driver in SPL, remove u-boot,dm-pre-reloc properties to let the fdtgrep tool drop the unnecessary nodes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-23arm: zynq: Enable setup board name for different boardsMichal Simek
There is no need to use zynq name as SYS_BOARD for all boards. The patch is adding an option to change it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23nand: zynq: Cleanup initializationEzequiel Garcia
CONFIG_NAND_ZYNQ selects CONFIG_SYS_NAND_SELF_INIT, so the driver doesn't have to play any ifdef game. Also, we can mark zynq_nand_init() as static and get rid of the mach-specific nand.h header. This is really a revert of: "mtd: zynq: nand: Move board_nand_init() function to board.c" (sha1: 310995d9f91ae56082b49be06fe8c3d01424f8f6) Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-21ARM: rmobile: Update E2 SilkMarek Vasut
The E2 Silk port was broken since some time. This patch updates the E2 Silk port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: The port is missing support for I2C1 for DA9063 reset, since the I2C driver needs to be converted to DM and DT probing. That's not an issue for this patch though, since the reset was broken on Silk since forever.
2018-04-18Merge git://git.denx.de/u-boot-uniphierTom Rini
2018-04-18Merge git://git.denx.de/u-boot-shTom Rini
2018-04-18ARM: dts: uniphier: sync DT with Linux 4.17-rc1Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-17Merge git://git.denx.de/u-boot-socfpgaTom Rini
2018-04-17ARM: rmobile: Update M2 KoelschMarek Vasut
The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARC: Remove unused DECLARE_GLOBAL_DATA_PTR from init_helpers.cEugeniy Paltsev
"Global data" structure "gd" is not used in init_helpers.c thus DECLARE_GLOBAL_DATA_PTR might be safely removed. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17arm: dts: socfpga: add reset propertyDinh Nguyen
Add reset dts property to the i2c nodes. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17arm: dts: socfpga: enables i2c0 in socfpga_de0_nanoDinh Nguyen
Add all the appropriate i2c alias in the base socfpga dtsi and enables the i2c node on the DE0 NANO board. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17ARM: dts: stratix10: Add base dtsi and devkit dtsDinh Nguyen
From the Linux v4.16-rc4, add the base dtsi and devkit dts files for the Stratix10 SoCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17arm: socfpga: stratix10: Add base address map for Statix10 SoCChin Liang See
Add the base address map for Stratix10 SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17ARM: rmobile: Enable RPC QSPI on R8A77970 V3M EagleMarek Vasut
Enable the RPC QSPI driver on R8A77970 V3M Eagle and configure the environment layout to match that used by old U-Boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARM: rmobile: Add Renesas RPC HF/QSPI DT nodesMarek Vasut
Add device tree nodes for the Renesas RPC HF/QSPI controller. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-16bios: vesa: Guard setting vesa mode with CONFIG_FRAMEBUFFER_SET_VESA_MODEBin Meng
If CONFIG_FRAMEBUFFER_SET_VESA_MODE is not set, don't switch graphics card to VESA mode. This applies to both native mode and emulator mode of running the VGA BIOS. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16x86: Rename e820entry to e820_entryBin Meng
This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-04-16x86: Use 'unsigned int' in install_e820_map() functionsBin Meng
This fixes the following checkpatch warning: warning: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-15 21:33:17 +0000