summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-10-26ARM: fix u-boot.lds for -ffunction-sections/-fdata-sectionsStephen Warren
When -ffunction-sections or -fdata-section are used, symbols are placed into sections such as .data.eserial1_device and .bss.serial_current. Update the linker script to explicitly include these. Without this change (at least with my gcc-4.5.3 built using crosstool-ng), I see that the sections do end up being included, but __bss_end__ gets set to the same value as __bss_start. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Allen Martin <amartin@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2012-10-26arm: ks8695: use defined constants for UARTYann Vernier
CONFIG_BAUDRATE and KS8695_UART_LINEC_WLEN8 used for UART registers
2012-10-26arm720: Remove CONFIG_ARM7_REVDMarek Vasut
This is a dead code, remove it. Signed-off-by: Marek Vasut <marex@denx.de>
2012-10-26arm720: Further clean up the arm720t directoryMarek Vasut
Clean up away old macros and such, so the file doesn't start piling up cruft. Signed-off-by: Marek Vasut <marex@denx.de> clean
2012-10-26stdio: Remove the CLPS7111 serial driverMarek Vasut
This driver is no longer used, remove it. Signed-off-by: Marek Vasut <marex@denx.de>
2012-10-26arm: Remove support for NETARMMarek Vasut
This stuff has been rotting in the tree for a while now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
2012-10-26arm: Remove support for s3c4510Marek Vasut
This stuff has been rotting in the tree for a year now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
2012-10-26arm: Remove support for lpc2292Marek Vasut
This stuff has been rotting in the tree for a year now. Remove it. Signed-off-by: Marek Vasut <marex@denx.de>
2012-10-26Merge remote-tracking branch 'u-boot-atmel/master'Albert ARIBAUD
2012-10-26Merge remote-tracking branch 'u-boot-ti/master'Albert ARIBAUD
2012-10-25am33xx/ddr_defs.h: rename DDR2/DDR3 defines to their actual part numbersPeter Korsgaard
So other parts can be added. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2012-10-25am33xx: support board specific ddr settingsPeter Korsgaard
Move the hardcoded ddr2/ddr3 settings for the ti boards to board code, so other boards can use different types/timings. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> [trini: Make apply with rtc32k_enable() in the file] Signed-off-by: Tom Rini <trini@ti.com>
2012-10-25am33xx: move generic parts of pinmux handling out from board/ti/am335xPeter Korsgaard
So they are available for other boards. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2012-10-25am33xx/board: use cpu_mmc_init() for default mmc initializationPeter Korsgaard
So platforms can override it with board_mmc_init() if needed. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2012-10-25am33xx: move ti i2c baseboard header handling to board/ti/am335x/Peter Korsgaard
The i2c header is specific to ti(-derived) boards, and not generic for all am335x boards. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> [trini: Make re-apply with rtc32k_enable() applied] Signed-off-by: Tom Rini <trini@ti.com>
2012-10-25am33xx/board.c: make wdtimer/uart_base staticPeter Korsgaard
Only used here (and uart_base only for SPL). Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
2012-10-25am33xx: Add SPI SPL as an optionTom Rini
Add the required config.mk logic for this SoC as well as the BOOT_DEVICE define. Finally, enable the options on the am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
2012-10-25VIDEO: add macro to set LCD size for DSS driverStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2012-10-25am335x: Enable RTC 32K OSC clockVaibhav Hiremath
In order to support low power state, you must source kernel system timers to persistent clock, available across suspend/resume. In case of AM335x device, the only source we have is, RTC32K, available in wakeup/always-on domain. Having said that, during validation it has been observed that, RTC clock need couple of seconds delay to stabilize the RTC OSC clock; and such a huge delay is not acceptable in kernel especially during early init and also it will impact quick/fast boot use-cases. So, RTC32k OSC enable dependency has been shifted to SPL/first-bootloader. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-24ColdFire: Add MCF5441x CPU supportAlison Wang
Add MCF5441x CPU support. The MCF5441x devices are a family of highly-integrated 32-bit microprocessors based on the Version 4m ColdFire microarchitecture, comprising of the V4 integer core, memory management unit(MMU) and enchanced multiply-accumulate unit(EMAC). Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-24ColdFire: Fix unused variable in cpu_init.cAlison Wang
Fix the following build warnings in cpu_init.c: cpu_init.c: In function 'cpu_init_f': cpu_init.c:47:9: warning: unused variable 'pll' cpu_init.c:46:10: warning: unused variable 'fbcs' cpu_init.c:44:10: warning: unused variable 'scm1' Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-23mpc83xx: add support for mpc8309Gerlando Falauto
This processor, though very similar to other members of the PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides yet another feature set than any supported sibling. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-23cleanup: introduce CONFIG_MPC830xGerlando Falauto
Introduce a new configuration token CONFIG_MPC830x to be shared among mpc8308 and mpc8309. Define it for existing 8308 boards, and refactor existing common code so to make future introduction of 8309 simpler. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-23cleanup: use CONFIG_QE instead of CONFIG_MPC8360 || CONFIG_MPC832xGerlando Falauto
simplify #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) for qe variables with #if defined(CONFIG_QE) Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-23am33xx: Enable DDR3 for DDR3 version of beagleboneJoel A Fernandes
DDR3 support is tested and working with beaglebone hardware. Include a check for this board type and configure DDR3. The timings and other configuration match EVM SK. Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Acked-by: Jason Kridner <jdk@ti.com>
2012-10-22Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxTom Rini
2012-10-2285xx: Protect timeout_save variable with ifdefsAndy Fleming
The timeout_save variable was only used by the DDR111_134 erratum code. It was being set, but never used. Newer compilers will actually complain about this. Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/boot: Change the compile macro for SRIO & PCIE boot master moduleLiu Gang
Currently, the SRIO and PCIE boot master module will be compiled into the u-boot image if the macro "CONFIG_FSL_CORENET" has been defined. And this macro has been included by all the corenet architecture platform boards. But in fact, it's uncertain whether all corenet platform boards support this feature. So it may be better to get rid of the macro "CONFIG_FSL_CORENET", and add a special macro for every board which can support the feature. This special macro will be defined in the header file "arch/powerpc/include/asm/config_mpc85xx.h". It will decide if the SRIO and PCIE boot master module should be compiled into the board u-boot image. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22poweprc/85xx: add QMan frequency info and fdt fixup.Haiying Wang
Starting from QMan3.0, the QMan clock cycle needs be exposed so that the kernel driver can use it to calculate the shaper prescaler and rate. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22mpc85xx/portals: Add qman and bman ip_cfg field into portal infoHaiying Wang
Because QMan3.0 and BMan2.1 used ip_cfg in ip_rev_2 register to differ the total portal number, buffer pool number etc, we can use this info to limit those resources in kernel driver. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platformYork Sun
New corenet platforms with chassis2 have separated DDR clock inputs. Use CONFIG_DDR_CLK_FREQ for DDR clock. This patch also cleans up the logic of detecting and displaying synchronous vs asynchronous mode. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1York Sun
Move spin table to cached memory to comply with ePAPR v1.1. Load R3 with 64-bit value if CONFIG_SYS_PPC64 is defined. 'M' bit is set for DDR TLB to maintain cache coherence. See details in doc/README.mpc85xx-spin-table. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Remove R6 from spin tableYork Sun
R6 was in ePAPR draft version but was dropped in official spec. Removing it to comply. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc8xxx: Fix DDR SPD failed messageYork Sun
Since empty DIMM slot is allowed on other than the first slot, remove the error message if SPD is not found in this case. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc8xxx: Add auto select bank interleaving modeYork Sun
Based on populated DIMMs, automatically select from cs0_cs1_cs2_cs3 or cs0_cs1 interleaving, or non-interleaving if not available. Fix the message of interleaving disabled if controller interleaving is enabled but DIMMs don't support it. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Add workaround for DDR erratum A004934York Sun
After DDR controller is enabled, it performs a calibration for the transmit data vs DQS paths. During this calibration, the DDR controller may make an inaccurate calculation, resulting in a non-optimal tap point. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: software workaround for DDR erratum A-004468York Sun
Boot space translation utilizes the pre-translation address to select the DDR controller target. However, the post-translation address will be presented to the selected DDR controller. It is possible that the pre- translation address selects one DDR controller but the post-translation address exists in a different DDR controller when using certain DDR controller interleaving modes. The device may fail to boot under these circumstances. Note that a DDR MSE error will not be detected since DDR controller bounds registers are programmed to be the same when configured for DDR controller interleaving. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc8xxx: Fix DDR initialization waiting for D_INITYork Sun
When ECC is enabled, DDR controller needs to initialize the data and ecc. The wait time can be calcuated with total memory size, bus width, bus speed and interleaving mode. If it went wrong, it is bettert to timeout than waiting for D_INIT to clear, where it probably hangs. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculationYork Sun
Fix handling quad-rank DIMMs in a system with two DIMM slots and first slot supports both dual-rank DIMM and quad-rank DIMM. For systems with quad-rank DIMM and double dual-rank DIMMs, cs_config registers need to be enabled to maintain proper ODT operation. The inactive CS should have bnds registers cleared. Fix the turnaround timing for systems with all chip-selects enabled. This wasn't an issue before because DDR was running lower than 1600MT/s with this interleaving mode. Fix DDR address calculation. It wasn't an issue until we have multiple controllers with each more than 4GB and interleaving is disabled. It also fixes the message of DDR: 2 GiB (DDR3, 64-bit, CL=0.5, ECC off) when debugging DDR and first DDR controller is disabled. With the fix, the first enabled controller information will be displayed. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc8xxx: Update DDR registersYork Sun
DDRC ver 4.7 adds DDR_SLOW bit in sdram_cfg_2 register. This bit needs to be set for speed lower than 1250MT/s. CDR1 and CDR2 are control driver registers. ODT termination valueis for IOs are defined. Starting from DDRC 4.7, the decoding of ODT for IOs is 000 -> Termsel off 001 -> 120 Ohm 010 -> 180 Ohm 011 -> 75 Ohm 100 -> 110 Ohm 101 -> 60 Ohm 110 -> 70 Ohm 111 -> 47 Ohm Add two write leveling registers. Each QDS now has its own write leveling start value. In case of zero value, the value of QDS0 will be used. These values are board-specific and are set in board files. Extend DDR register timing_cfg_1 to have 4 bits for each field. DDR control driver registers and write leveling registers are added to interactive debugging for easy access. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22fm/mEMAC: add mEMAC frame workRoy Zang
The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Add B4860 and variant SoCsYork Sun
Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Add T4240 SoCYork Sun
Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Add T4 device definitionsAndy Fleming
The T4 has added devices to previous corenet implementations: * SEC has 3 more DECO units * New PMAN device * New DCE device This doesn't add full support for the new devices. Just some preliminary support. Move PMAN LIODN to upper half of register Despite having only one LIODN, the PMAN LIODN is stored in the upper half of the register. Re-use the 2-LIODN code and just set the LIODN as if the second one is 0. This results in the actual LIODN being written to the upper half of the register. Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/corenet2: fix mismatch DDR sync bit from RCWYork Sun
Corenet 2nd generation Chassis doesn't have ddr_sync bit in RCW. Only async mode is supported. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/corenet2: Add SerDes for corenet2York Sun
Create new files to handle 2nd generation Chassis as the registers are organized differently. - Add SerDes protocol parsing and detection - Add support of 4 SerDes - Add CPRI protocol in fsl_serdes.h The Common Public Radio Interface (CPRI) is publicly available specification that standardizes the protocol interface between the radio equipment control (REC) and the radio equipment (RE) in wireless basestations. This allows interoperability of equipment from different vendors,and preserves the software investment made by wireless service providers. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2York Sun
Corenet 2nd generation Chassis has different RCW and registers for SerDes. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/e6500: Move QCSP registers for QMan v3York Sun
The QCSP registers are expanded and moved from offset 0 to offset 0x1000 for SoCs with QMan v3. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: expand SERDES reference clock select bitYork Sun
Expand the reference clock select to three bits 000: 100 MHz 001: 125 MHz 010: 156.25MHz 011: 150 MHz 100: 161.1328125 MHz All others reserved Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2York Sun
Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>