summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Expand)Author
2022-04-06MLK-20373-4 imx8: update mem map tablePeng Fan
2022-04-06MLK-19552 imx8qm: xen: fix memory mapPeng Fan
2022-04-06MLK-18614-3 Xen: imx8qm_mek: Fix the CONFIG_FASTBOOT_USB_DEV and DTB issueYe Li
2022-04-06MLK-18577-7 imx8qm: mek: support uboot in vmPeng Fan
2022-04-06MLK-18577-5 imx8: update soc code to support uboot in XEN VMPeng Fan
2022-04-06MLK-18577-3 armv8: xen: add console write hypercallPeng Fan
2022-04-06LF-3483-17 imx: optee: Copy the fdt overlay before using itYe Li
2022-04-06LF-3635: imx8qm: Use malloc for container processingNitin Garg
2022-04-06MLK-25346: Add cockpit device tree and config filesNitin Garg
2022-04-06MLK-25346: Add support for cockpit on i.MX8QM MEK boardNitin Garg
2022-04-06MLK-25271: new qspihdr subsystem for u-boot q(f)spi bootHan Xu
2022-04-06MLK-25010 iMX8MN: Update low_drive_gpu_freq for new GPU node pathYe Li
2022-04-06LF-2637 mx6: fuse: update node pathPeng Fan
2022-04-06MLK-24958-4 DTS: imx8dxl-evk: Add dedicated DTS for LCD enablemenntYe Li
2022-04-06MLK-24958-3 video: mxsfb: Add iMX8DXL support to LCDIF driverYe Li
2022-04-06MLK-24958-2 DTS: imx8qxp/dxl: Update LCDIF clock namesYe Li
2022-04-06MLK-24941 arm: dts: set sensor regulator always on for imx6q/qp/dlClark Wang
2022-04-06MLK-24860-2 imx8mp_evk: Add DDR4 EVK board supportYe Li
2022-04-06MLK-24817 iMX8MN: Add iMX8MN 11x11 DDR3L EVK supportYe Li
2022-04-06MLK-24786 imx8dxl_ddr3_evk: Add UUU support to second USB portYe Li
2022-04-06MLK-24766-6 arm64: dts: imx8qxp-val: enable lpspi0 supportClark Wang
2022-04-06MLK-24766-5 arm64: dts: imx8dxl: enable lpspi3 supportClark Wang
2022-04-06MLK-24766-4 arm: dts: imx7ulp: enable lpspi3 supportClark Wang
2022-04-06MLK-24766-3 imx7ulp-clk: add lpspi clk enable functionClark Wang
2022-04-06MLK-24750-1 spl: Allow iMX7/8/8M to overwrite spl_board_boot_deviceYe Li
2022-04-06MLK-24720 imx8mq_ddr4_val: Change to use iMX8M DDR driverYe Li
2022-04-06MLK-24616 imx8: misc: Fix hardcoded LPUART0 for LPCGYe Li
2022-04-06MLK-24504 DTS: imx8dxl: Fix GPIO seq ID issueYe Li
2022-04-06MLK-24492 mx7 Align IOMUX GRP offset with mx6Silvano di Ninno
2022-04-06MLK-24474: Add command to set SECO FIPS modeFranck LENORMAND
2022-04-06MLK-24482 imx8dxl: Update chip revision to recognize A1Ye Li
2022-04-06LF-1873 imx8: snvs_security: Fix dead code in apply_tamper_pin_list_configYe Li
2022-04-06LF-1876 imx8: snvs_security: Fix dead code in apply_snvs_dgo_configYe Li
2022-04-06MLK-24461 DXL: Enable second USB 8DXLFrank Li
2022-04-06MLK-24426-2 iMX8DXL: Print the V2X FW build infoYe Li
2022-04-06MLK-24426-1 misc: imx8: Update SCFW API to get V2X build infoYe Li
2022-04-06MLK-24406 arm: dts: imx8dxl: limit the max frequency to 100MHz for SD cardHaibo Chen
2022-04-06MLK-24377 imx8mq: Remove clearing mfg prot private keyYe Li
2022-04-06MLK-24379-2 imx8: Configure SNVS driver to u-boot onlyYe Li
2022-04-06MLK-23834: Fix SNVS configuration of AT polynomialsFranck LENORMAND
2022-04-06MLK-23834: Add gpio_conf command to configure GPIOFranck LENORMAND
2022-04-06MLK-23834: handle tampers which are not GPIOFranck LENORMAND
2022-04-06MLK-23834: Remove example functions to avoid compilation breakFranck LENORMAND
2022-04-06MLK-23834: Move SNVS board config to headers filesFranck LENORMAND
2022-04-06MLK-24254-3 imx8: spl: Support booting from secondary container setYe Li
2022-04-06MLK-24149 arm: imx8mp: update i.MX8MP pin headerPeng Fan
2022-04-06MLK-23820 imx8mq/mm: Add config to support secondary image bootYe Li
2022-04-06MLK-24188-1 imx8: add AHB clk for SDHCPeng Fan
2022-04-06MLK-24079 imx8mp: Disable DWC3 gadget before UUU jumping to kernelYe Li
2022-04-06MLK-24062-5 DTS: imx8qm: Remove unused nodes from DTSYe Li