summaryrefslogtreecommitdiff
path: root/arch/arm/lib/bootm-fdt.c
AgeCommit message (Collapse)Author
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-28arm: bootm-fdt.c: fix compiler warningHeiko Schocher
compiling U-Boot with bosch_mpcxxxxd_sd_defconfig drops warning: arch/arm/lib/bootm-fdt.c: In function ‘arch_fixup_fdt’: arch/arm/lib/bootm-fdt.c:37:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret = 0; ^~~ Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-12-24arm: Add support of updating dts before fix-upPrabhakar Kushwaha
"ethernet" node fix-up for device tree happens before Linux boot. There can be requirement of updating "ethernet" node even before fix-up. So, add support of updating "ethernet" node. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-11spl: fdt: support for fdt fixup for falcon bootB, Ravi
Adding support for fdt fixup to update the memory node in device tree for falcon boot. This is needed for single stage or falcon bootmode, to pass memory configuration to kernel through DT memory node. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-01-18ARMv8/sec_firmware: relocated and renamed the config FSL_PPA_ARMV8_PSCIHou Zhiqiang
Moved the config FSL_PPA_ARMV8_PSCI from fsl-layerscape's Kconfig to Kconfig under armv8 and renamed it to SEC_FIRMWARE_ARMV8_PSCI. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-15ARMv8: Setup PSCI memory and device treemacro.wave.z@gmail.com
Newly add ARMv8 PSCI needs to be initialized, be copied or reserved in right place, this patch does all the setup steps. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-15ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definitionmacro.wave.z@gmail.com
NXP/Freescale uses macro CONFIG_ARMV8_PSCI to enable their private PSCI implementation in PPA firmware, but this macro naming too generic, so this patch replaces it with a specic one CONFIG_FSL_PPA_ARMV8_PSCI. And this macro CONFIG_ARMV8_PSCI will be used for a generic PSCI for ARMv8 which will be added in following patchs. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-02libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORYMasahiro Yamada
Commit e2f88dfd2d96 ("libfdt: Introduce new ARCH_FIXUP_FDT option") allows us to skip memory setup of DTB, but a problem for ARM is that spin_table_update_dt() and psci_update_dt() are skipped as well if CONFIG_ARCH_FIXUP_FDT is disabled. This commit allows us to skip only fdt_fixup_memory_banks() instead of the whole of arch_fixup_fdt(). It will be useful when we want to use a memory node from a kernel DTB as is, but need some fixups for Spin-Table/PSCI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build error for x86: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-31libfdt: Introduce new ARCH_FIXUP_FDT optionMichal Simek
Add new Kconfig option to disable arch_fixup_fdt() calls for cases where U-Boot shouldn't update memory setup in DTB file. One example of usage of this option is to boot OS with different memory setup than U-Boot use. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-19Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/cpu/armv8/Makefile arch/arm/lib/bootm-fdt.c
2016-07-19ARMv8/PSCI: Fixup the device tree for PSCIHou Zhiqiang
Set the enable-method in the cpu node to PSCI, and create device node for PSCI, when PSCI was enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-14arm64: add better and more generic spin-table supportMasahiro Yamada
There are two enable methods supported by ARM64 Linux; psci and spin-table. The latter is simpler and helpful for quick SoC bring up. My main motivation for this patch is to improve the spin-table support, which allows us to boot an ARMv8 system without the ARM Trusted Firmware. Currently, we have multi-entry code in arch/arm/cpu/armv8/start.S and the spin-table is supported in a really ad-hoc way, and I see some problems: - We must hard-code CPU_RELEASE_ADDR so that it matches the "cpu-release-addr" property in the DT that comes from the kernel tree. - The Documentation/arm64/booting.txt in Linux requires that the release address must be zero-initialized, but it is not cared by the common code in U-Boot. We must do it in a board function. - There is no systematic way to protect the spin-table code from the kernel. We are supposed to do it in a board specific manner, but it is difficult to predict where the spin-table code will be located after the relocation. So, it also makes difficult to hard-code /memreserve/ in the DT of the kernel. So, here is a patch to solve those problems; the DT is run-time modified to reserve the spin-table code (+ cpu-release-addr). Also, the "cpu-release-addr" property is set to an appropriate address after the relocation, which means we no longer need the hard-coded CPU_RELEASE_ADDR. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24ARM: move #ifdef to match the error handling codeMasahiro Yamada
Match the #ifdef ... #endif and the code, ret = do_something(); if (ret) return ret; This will make it easier to add more #ifdef'ed code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-14arch/arm/lib/bootm-fdt.c: Guard the include of <asm/armv7.h>Tom Rini
With d6b72da0 we started including this file unconditionally. This isn't allowed in a file that we also use on armv8. This will get cleaned up a bit better once we really start using these same features (and have similar fdt updates needed) on armv8. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-13virt-dt: Allow reservation of secure region when in a RAM carveoutJan Kiszka
In this case the secure code lives in RAM, and hence the memory node in the device tree needs to be adjusted. This avoids that the OS will map and possibly access the reservation. Add support for setting CONFIG_ARMV7_SECURE_RESERVE_SIZE to carve out such a region. We only support cutting off memory from the beginning or the end of a RAM bank as we do not want to increase their number (which would happen if punching a hole) for simplicity reasons This will be used in a subsequent patch for Jetson-TK1. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditionsJan Kiszka
CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to be taken into account additionally. CONFIG_ARMV7_PSCI is only set on boards that support CONFIG_ARMV7_NONSEC, and it only works on those. CC: Tang Yuantian <Yuantian.Tang@freescale.com> CC: York Sun <yorksun@freescale.com> CC: Steve Rae <srae@broadcom.com> CC: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-03-09ARM: PSCI: Rework the DT handler slightlyTom Rini
The way the PSCI DT update happens currently means we pull in <asm/armv7.h> everywhere, including on ARMv8 and that in turn brings in <asm/io.h> for some non-PSCI related things that header needs to deal with. To fix this, we rework the hook slightly. A good portion of arch/arm/cpu/armv7/virt-dt.c is common looking and I hope that when PSCI is needed on ARMv8 we can re-use this by and large. So rename the current hook to psci_update_dt(), move the prototype to <asm/psci.h> and add an #ifdef that will make re-use later easier. Reported-by: York Sun <yorksun@freescale.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: York Sun <yorksun@freescale.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: York Sun <yorksun@freescale.com>
2014-07-28ARM: HYP/non-sec/PSCI: emit DT nodesMarc Zyngier
Generate the PSCI node in the device tree. Also add a reserve section for the "secure" code that lives in in normal RAM, so that the kernel knows it'd better not trip on it. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-28ARM: convert arch_fixup_memory_node to a generic FDT fixup functionMa Haijun
Some architecture needs extra device tree setup. Instead of adding yet another hook, convert arch_fixup_memory_node to be a generic FDT fixup function. [maz: collapsed 3 patches into one, rewrote commit message] Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-05-14arm: Use image_setup_linux() instead of local codeSimon Glass
Use the common FDT setup function that is now available in image. Move the FDT-specific code to a new bootm-fdt.c and remove unused headers from bootm.c. Signed-off-by: Simon Glass <sjg@chromium.org>