summaryrefslogtreecommitdiff
path: root/arch/arm/dts/tegra30-colibri.dts
AgeCommit message (Collapse)Author
2017-08-15apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequenciesMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-07-11tegra: fdt: Ensure that the console UART is enabledSimon Glass
Many tegra boards have the console UART node disabled. With livetree this prevents serial from working since it does not 'force' the console to be bound. Updates the affected boards to fix this error. The boards were checked with: for b in $(grep tegra boards.cfg |grep -v integrator | \ awk '{print $7}' | sort); do echo $b; fdtgrep -c nvidia,tegra20-uart b/$b/u-boot.dtb |grep okay; done Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
2016-09-27ARM: tegra: pull Tegra30 SoC DT from Linux v4.7Stephen Warren
The primary benefit of this change is that it adds all missing clocks and resets properties to peripherals. This will allow peripheral drivers to migrate to the standard clock and reset APIs in the future. Main changes: * Modification of PCIe memory region addresses. The HW memory layout is programmable, so this should work fine, and Beaver PCIe was tested without issue. * Removal of pcie_xclk from the PCIe node and clock binding header. This clock doesn't exist and isn't used; only a reset with this ID exists. * Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use DMA so isn't affected. * Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all information required by U-Boot, so U-Boot is not affected. * Changed the phy_type value for the second USB port. This required board DTs to be updated to keep the same configuration. * Boards need to define the clk32k_in clock that feeds the Tegra PMC. * Addition of tegra30-mc.h since tegra30.dtsi now includes it. * Conversion of many magic numbers to named defines. * Addition of many nodes not used by U-Boot. * Node sort order fixes. Remaining deltas relative to the Linux DT: * None. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-09-27mmc: tegra: use correct alias for SDHCI/MMC nodesStephen Warren
The Tegra MMC driver currently honors "sdhci" entries in /aliases. The MMC core however uses "mmc" entries in /aliases. This difference will be relevant once the Tegra MMC driver is converted to DM, and the MMC core handles alias lookups. To avoid issues during that conversion, fix the Tegra MMC driver and all Tegra DTs to use the same alias name as the MMC core does. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-13apalis/colibri_t30: fix usb dm regressionMarcel Ziswiler
Unfortunately currently both Apalis T30 as well as Colibri T30 crash upon starting USB host support. This is due to the following patch not having taken into account that our T30 device trees were defaulting to peripheral only mode instead of otg: commit ddb9a502d18008e845d5a8fa03ec48630fa77fb7 dm: usb: tegra: Move most of init/uninit into a function This patch fixes this by defaulting to otg now. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-13apalis/colibri_t20/30: clean-upMarcel Ziswiler
Various clean-ups either in comments, order or spacing without any functional impact: - Add some comments in the device trees resp. reorder some parameters for consistency across all our modules. - Sort some include files alphabetically (while leaving common.h on top of course). - Streamline some comments in the configuration files and fix the spacing from using spaces to tabs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-03-04apalis/colibri_t30: fix MMC/SD card detect GPIOsMarcel Ziswiler
This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken by the following commit: 2b2b50bc8748 "dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs" While at it also re-add the comments describing which particular Apalis/Colibri pins those GPIOs are on. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-01-29dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOsSimon Glass
This new method is much easier and matches the kernel. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-12-18ARM: tegra: colibri_t30: comment style fixMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-10-23Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2014-10-22dm: tegra: dts: Add aliases for spi on tegra30 boardsSimon Glass
All boards with a SPI interface have a suitable spi alias except the tegra30 boards. Add these missing aliases. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22tegra: dts: colibri_t30 add serial port detailsMarcel Ziswiler
Add missing chosen stdout-path device tree node. This got missed by commit c369139234c03b1494394d12cd27009f47aa6606 tegra: dts: Add serial port details Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-08-18ARM: tegra: add Colibri T30 board supportStefan Agner
This adds board support for the Toradex Colibri T30 module. Working functions: - SD card boot - eMMC environment and boot - USB host/USB client (on the dual role port) - Network (via ASIX USB) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>