summaryrefslogtreecommitdiff
path: root/arch/arm/dts/stm32f746.dtsi
AgeCommit message (Collapse)Author
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. All pinctrl bindings are updated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. Migrate also DT nodes which are not yet available on kernel DT side as ethernet, ltdc and qspi nodes. Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-16ARM: dts: stm32: Update qspi bindings for stm32f746Patrice Chotard
Align qspi bindings following kernel dt-bindings Documentation/devicetree/bindings/mtd/stm32-quadspi.txt from kernel v4.17-rc1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-05-16ARM: dts: stm32: Add quadspi reset for stm32f746Patrice Chotard
Add missing reset property in quadspi node. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-19arm: dts: stm32: add ltdc for STM32F746Philippe CORNU
Add display controller node in device-tree. Signed-off-by: yannick fertre <yannick.fertre@st.com> [agust: rebased on master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-03-13ARM: dts: stm32: Add timer support for STM32F7Patrice Chotard
Add missing timer node to enable timer5 for STM32F7 SoCs family Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28ARM: dts: stm32: Add STMMAC clocks for stm32f746Patrice Chotard
Add ETHMAC, ETHMACRX and ETHMACTX clocks for STMMAC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-10ARM: DTS: stm32: add MMC nodes for stm32f746-disco and stm32f769-discoPatrice Chotard
Add DT nodes to enable ARM_PL180_MMCI IP support for STM32F746 and STM32F769 discovery boards There is a hardware issue on these boards, it misses a pullup on the GPIO line used as card detect to allow correct SD card detection. As workaround, cd-gpios property is not present in DT. So SD card is always considered present in the slot. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-29ARM: DTS: stm32: update rcc compatible for STM32F746Patrice Chotard
Align the RCC compatible string with the one used by kernel. It will allow to use the same clock driver for STM32F4 and STM32F7 and to manage the differences between the 2 SoCs Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-29ARM: DTS: stm32: add pwrcfg node for stm32f746Patrice Chotard
This node is needed to enable performance mode when system frequency is set up to 200Mhz. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-26ARM: DTS: stm32: align DT clock declaration with kernelPatrice Chotard
Use the same clocks macro than the one used by kernel DT. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-06-12serial: stm32x7: align compatible with kernel onePatrice Chotard
stm32x7.c driver is dedicated for STM32F7. In kernel, "st,stm32-usart" and "st,stm32-uart" compatible strings are dedicated for STM32F4. To keep U-boot and kernel aligned, replace the serial compatible string from "st,stm32-usart", "st,stm32-uart" to "st,stm32f7-usart", "st,stm32f7-uart" specific for STM32F7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-05-08stm32f7: move board specific pin muxing to dtsVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08ARM: DT: stm32f7: add gpio device tree nodesVikas Manocha
Also created alias for gpios for stm32f7 discovery board. Based on these aliases, it would be possible to get gpio devices by sequence. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: use clock driver to enable sdram controller clockVikas Manocha
This patch also removes the sdram/fmc clock enable from board specific code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08ARM: DT: stm32f7: add sdram pin contol nodeVikas Manocha
Also added DT binding doc for stm32 fmc(flexible memory controller). Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: use clock driver to enable qspi controller clockVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-03-17ARM: DT: stm32f7: add qspi pin contol nodeVikas Manocha
It also removes the qspi pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add ethernet pin contol nodeVikas Manocha
It also removes the ethernet pin configuration done during the board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add pin control node for serial port pinsVikas Manocha
And remove the uart pin configuration from board initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add pin control device nodeVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17ARM: DT: stm32f7: add usart1 & clock device tree nodesVikas Manocha
Also created alias for usart1 and specified oscillator clock for stm32f7 discovery board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-01-28ARM: DTS: stm32: add stm32f746-disco device tree filesMichael Kurz
This patch adds the DTS source files needed for stm32f746-disco board The files are based on the stm32f429/469 files from current linux kernel. Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi" Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>