summaryrefslogtreecommitdiff
path: root/arch/arm/dts/Makefile
AgeCommit message (Collapse)Author
2024-03-21arm: dts: k3-am654-base-board: Add ICSSG2 Ethernet supportMD Danish Anwar
ICSSG2 provides dual Gigabit Ethernet support. Add ICSSG2 ethernet node to an overlay k3-am654-icssg2.dts Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
2024-03-21arm: dts: Add J722S Device Tree from LinuxJayesh Choudhary
Pull in the device tree source files for TI's J722S SoCs needed to boot the board from v6.6-rc5. These are an early release with only the peripherals to boot the board via UART boot. Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
2023-12-01Merge tag '09.01.00.006' into toradex_ti-09.01.00.006Emanuele Ghidoli
RC Release 09.01.00.006
2023-11-24arm: dts: k3-am642-evm: Add NAND supportRoger Quadros
Add NAND support for A53 SPL and u-boot. For A53 SPL & u-boot we use NAND overlay to add NAND support. Signed-off-by: Roger Quadros <rogerq@kernel.org>
2023-10-31arm: dts: add am62p dtbs to makefileBryan Brattlof
Thanks to the CONFIG_DEFAULT_DEVICE_TREE option in the defconfig the correct device tree blobs are being built for each uboot stage. However rather than relying on this add a am62p5 target to the arm/dts/Makefile Signed-off-by: Bryan Brattlof <bb@ti.com>
2023-10-31arm: dts: Fix build of am62a7 dtbsNishanth Menon
am62a7 should be built with CONFIG_SOC_K3_AM62A7 not CONFIG_SOC_K3_AM625 Fixes: 6bdfa69155d8 ("arm: dts: introduce am62a7 u-boot dtbs") Cc: Bryan Brattlof <bb@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Francesco Dolcini <francesco@dolcini.it> Cc: Sjoerd Simons <sjoerd@collabora.com> Cc: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-30arm: dts: Add support for AM62x SIP SKEVM at R5 SPLNitin Yadav
The AM62x SIP SKEVM board has different type of DDR than AM62x SK board. This requires different r5 SPL device tree. These dt changes add support for AM62x SIP SKEVM at R5 SPL. Signed-off-by: Nitin Yadav <n-yadav@ti.com>
2023-08-30Merge tag '09.00.00.008' into toradex_ti-u-boot-2023.04Marcel Ziswiler
RC Release 09.00.00.008
2023-08-07arm: dts: Add k3-j721e-beagleboneai64Robert Nelson
BeagleBoard.org BeagleBone AI-64 is an open source hardware single board computer based on the Texas Instruments TDA4VM SoC featuring dual-core 2.0GHz Arm Cortex-A72 processor, C7x+MMA and 2 C66x floating-point VLIW DSPs, 3x dual Arm Cortex-R5 co-processors, 2x 6-core Programmable Real-Time Unit and Industrial Communication SubSystem, PowerVR Rogue 8XE GE8430 3D GPU. The board features 4GB DDR4, USB3.0 Type-C, 2x USB SS Type-A, miniDisplayPort, 2x 4-lane CSI, DSI, 16GB eMMC flash, 1G Ethernet, M.2 E-key for WiFi/BT, and BeagleBone expansion headers. This board family can be indentified by the BBONEAI-64-B0 in the at24 eeprom: [aa 55 33 ee 01 37 00 10 2e 00 42 42 4f 4e 45 41 |.U3..7....BBONEA|] [49 2d 36 34 2d 42 30 2d 00 00 42 30 30 30 37 38 |I-64-B0-..B00078|] https://beagleboard.org/ai-64 https://git.beagleboard.org/beagleboard/beaglebone-ai-64 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-11board: toradex: add verdin am62 supportMarcel Ziswiler
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT V1.0A module. They are strapped to boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, DFU support is disabled for now due to missing AM62x USB support. Boot sequence is: SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img) Upstream-Status: Pending V2 has been sent [1] and a re-based V3 will be sent once the upstream TI stuff sufficiently stabilizes. [1] https://lore.kernel.org/all/20230612205444.363727-4-marcel@ziswiler.com Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-06-20arm: dts: Add k3-am625-beagleplayRobert Nelson
BeagleBoard.org BeaglePlay is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM625 SoC that allows you to create connected devices that work even at long distances using IEEE 802.15.4g LR-WPAN and IEEE 802.3cg 10Base-T1L. Expansion is provided over open standards based mikroBUS, Grove and QWIIC headers among other interfaces. This board family can be identified by the 24c32 eeprom: [aa 55 33 ee 01 37 00 10 2e 00 42 45 41 47 4c 45 |.U3..7....BEAGLE|] [50 4c 41 59 2d 41 30 2d 00 00 30 32 30 30 37 38 |PLAY-A0-..020078|] https://beagleplay.org/ https://git.beagleboard.org/beagleplay/beagleplay Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Co-developed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-06-07arm: dts: k3-am69-sk: Add r5 specific dt supportDasnavis Sabiya
Add initial support for device tree that runs on R5. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
2023-06-07arm: dts: Add support for AM69 Starter KitDasnavis Sabiya
AM69 Starter Kit is a single board designed for TI AM69 SoC. TI AM69 SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. The SOC comprises of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs, Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP) and multiple vision assist accelerators, Depth and Motion Processing Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA) and C7x floating point vector DSP AM69 SK supports the following interfaces: * 32 GB LPDDR4 RAM *x1 Gigabit Ethernet interface * x1 USB 3.1 Type-C port * x2 USB 3.1 Type-A ports * x1 PCIe M.2 M Key * x1 PCIe M.2 E Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface * 40-pin Raspberry Pi header * 50-pin ENET Header Add initial support for the AM69 SK board. Design Files: https://www.ti.com/lit/zip/SPRR466 TRM: https://www.ti.com/lit/zip/spruj52 Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
2023-05-25arm: dts: Makefile: Add AM62x LP SK device treeNitin Yadav
The AM62x LP SK board has separate set of device tree. Update Makefile with k3-am62-r5-lp-sk.dts and k3-am62-lp-sk.dts device tree to add support of AM62x LP SK. Signed-off-by: Nitin Yadav <n-yadav@ti.com>
2023-04-13arm: dts: introduce j784s4 u-boot dtbsHari Nagalla
Introduce the base dts files needed for u-boot or to augment the linux dtbs for use in the u-boot-spl and u-boot binaries. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
2023-02-28board: rockchip: add Radxa ROCK5B Rk3588 boardEugen Hristev
ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IOJagan Teki
Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. commit <a5079a534554> ("arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO") Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3566: Add Radxa Compute Module 3 IOJagan Teki
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Specification: - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - Phone jack - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. linux-next commit for the same, commit <8f19828844f2> ("arm64: dts: rockchip: Fix compatible for Radxa CM3") Add support for Radxa CM3 IO Board. Co-developed-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-22arm: dts: chameleonv3: Add 270-2 variantPaweł Anikiel
Add devicetree for chameleonv3 with the 270-2I2-D11E variant of the Mercury+ AA1 module Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-13arm: mvebu: Add support for Synology DS116 (Armada 385)Tony Dinh
Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2023-02-13arm: mvebu: Add support for Thecus N2350 (Armada 385) boardTony Dinh
Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2023-02-01Merge tag 'u-boot-imx-20230201' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2023.04 ----------- - several conversion to DM_SERIAL and DM_I2C - fixes for Toradex boards - PSCI CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14965
2023-01-31Merge tag 'u-boot-amlogic-20230131' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - jethub j100: add rescue boot from microSD - move meson sm command to cmd/meson and add efusedump sub-command - switch dwc2 otg to DM for G12A, GXL & AXG - Add new boards: - Odroid Go Ultra - Odroid-N2L
2023-01-30imx8mm-phg: Add board supportFabio Estevam
Add the board support for the i.MX8MM Cloos PHG board. This board uses a imx8mm-tqma8mqml SoM from TQ-Group. imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken directly from Linux 6.2-rc3. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-30ARM: dts: Import Odroid-N2L supportNeil Armstrong
Import Odroid-N2L support posted at [1] and merged for Linux v6.3-rc1. [1] https://lore.kernel.org/all/20230122-topic-odroid-n2l-upstream-initial-v2-0-8d3fea6d403d@linaro.org/ Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-1-c60f695e0f6c@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-27arm: dts: k3-am68-sk: Add r5 specific dt supportSinthu Raja
Add initial support for AM68 SK device tree that runs on R5. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-27arm: dts: Add support for A72 specific AM68 Starter Kit Base BoardSinthu Raja
The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board. Schematics: https://www.ti.com/lit/zip/SPRR463 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-27Merge tag 'xilinx-for-v2023.04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx chnages for v2023.04-rc1 makefile: - Add multi_dtb_fit dependency clk: - Handle error cases microblaze: - Disable falcon mode and cleanup code around xilinx: - Enable regular expression matching in board_fit_config_name_match() - Fix FRU handling for 0xC1 format - Fix Xilinx legacy format eeprom parsing zynqmp: - Some DT updates/cleanups - Fix IDcode for xck24 - Remove empty mini config files - Add support for k24 versal: - Remove empty mini config files versal_net: - Setup timer when runs in EL3 - Build u-boot.elf for mini configurations zynq-gem: - Add support for new compatible strings - Remove support for Avnet Ultrazedev SOM - Handle SGMII with PCS phy spi: - Add support for gigadevice parts misc: - Remove CONFIG_TARGET_VENUS ifdef - Add missing headers to remove sparse warnings
2023-01-24arm64: zynqmp: Add support for Kria K24 SOMMichal Simek
SOM itself from PS point of view is using the same configuration as K26 that's why reuse that files and only change compatible strings. The reason for creating own set of files is just in case when versions start to diverge because of HW change, supply chain issue, etc. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/61f877ec0b480c5bd368a1211fc73ff7465016bd.1674043915.git.michal.simek@amd.com
2023-01-20ARM: dts: sync Amlogic ARM64 DT from v6.2-rc1Neil Armstrong
This syncs the Amlogic G12A, G12B & SM1 base DT + the Odroid Go Ultra DT from Linux v6.2-rc1 from commmit [1]. [1] 1b929c02afd3 ("Linux 6.2-rc1") Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-1-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-16arm64: dts: rk3399: Add upstream Pinephone Pro dtsPeter Robinson
Initial support for the PinePhone Pro has now landed upstream in Linux 6.1 RC1 so sync the dts from 6.2-rc1 for initial support. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2023-01-16ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IOJagan Teki
Neural Compute Module 2(Neu2) IO board is an industrial form factor evaluation board from Edgeble AI. General features: - microSD slot - MIPI DSI connector - 2x USB Host - 1x USB OTG - Ethernet - mini PCIe - Onboard PoE - RS485, RS232, CAN - Micro Phone array - Speaker - RTC battery slot - 40-pin expansion Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform. Add support for it. Signed-off-by: Jagan Teki <jagan@edgeble.ai>
2023-01-11arm64: zynqmp: remove Avnet UltraZed-EV Starter KitLuca Ceresoli
Nobody seems interested and able to keep this board supported, and xilinx_zynqmp_virt_defconfig is supposed to be enough for any zynqmp board. See the discussion at: https://lore.kernel.org/u-boot/CAPnjgZ3hHbyiFf=_Lp-Wz_XOWBkV-3vK4Q3xp=7bcERw-spNpA@mail.gmail.com/T/#m76d726f1ab3f7074c8105c9a2af2110ac7d18708 Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20230111082554.1930782-1-luca.ceresoli@bootlin.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-09arm: dts: introduce am62a7 u-boot dtbsBryan Brattlof
Introduce the base dts files needed for u-boot or to augment the linux dtbs for use in the u-boot-spl and u-boot binaries Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-11-22arm64: versal: Add octal spi flash mini u-boot configurationAshok Reddy Soma
Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support octal spi flash and uses DCC terminal for console output. Add required dts for octal spi flash mini u-boot configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221116141155.14788-4-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22arm64: versal: Add qspi flash mini u-boot configurationAshok Reddy Soma
Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support qspi flash and uses DCC terminal for console output. Add required dts files for qspi mini configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221116141155.14788-2-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-08arm: imx8mp: Initial MSC SM2S iMX8MP supportMartyn Welch
Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction with the MSC SM2-MB-EP1 Mini-ITX Carrier Board. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-11-07arm: mvebu: Add RD-AC5X boardChris Packham
The RD-AC5X-32G16HVG6HLG-A0 development board main components and features include: * Main 12V/54V power supply * 270 Gbps throughput packet processor on the main board * DDR4: * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs) * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs) * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement * 16GB eMMC (Samsung KLMAG1JETD-B041006) * 16MB SPI NOR(GD25Q127C) * 32 x 1000 Base-T interfaces * 16 x 2500 Base-T interfaces * SR1: 88E2540*4 * SR2: 88E2580*1+88E2540*2 * Six (6) x 25G Base-R SFP28 interfaces * One (1) x RJ-45 console connector, interfacing to the on board UART * One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0) * One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1) * One (1) x RJ-45 1G Base-T Management port, interfacing to the host port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy * One (1) x Oculink port, interfacing to the PCIe port for external CPU connection * POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~ Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881 solution) * POE total power budget 780W * LED interfaces per network port/POE * LED interfaces (common) showing system status * PTP TC mode Supported (Reserved M.2 connector to support BC mode) Signed-off-by: Chris Packham <judge.packham@gmail.com>
2022-10-31arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753William Zhang
BCM6753 is essentially same as the main chip BCM6855 but with different SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its configuration and dts settings. This includes: - Remove the bcm96753ref board folder. It is replaced by the generic bcmbca board folder. - Merge the 6753.dtsi setting to the new 6855.dtsi file. Update 96753ref board dts with the new compatible string. - Delete broadcom_bcm96763ref.h and merge its setting to the new bcm96855.h file. - Delete bcm96753ref_ram_defconfig and use a basic config version of bcm96855_defconfig Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858William Zhang
Now that BCM6858 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its configuration and dts settings. This includes: - Remove the bcm968580xref board folder. It is replaced by the generic bcmbca board folder. - Update bcm968580xref board dts with the new compatible string. - Delete broadcom_bcm968580xref.h and merge its setting to the new bcm96858.h file. - Remove bcm968580xref_ram_defconfig as a basic config version of bcm96858_defconfig is now added. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360William Zhang
BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the original ARCH_BCM68360 support and migrate its configuration and dts settings. This includes: - Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder. - Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string. - Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file. - Remove bcm968360bg_ram_defconfig as a basic config version of bcm96856_defconfig is now added. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm63158 support under CONFIG_ARCH_BCM63158William Zhang
Now that BCM63158 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM63158, remove the original ARCH_BCM63158 support and migrate configuration settings. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm4908 SoC supportWilliam Zhang
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm6813 SoC supportWilliam Zhang
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm4912 SoC supportWilliam Zhang
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-28 11:05:39 +0000