summaryrefslogtreecommitdiff
path: root/README
AgeCommit message (Collapse)Author
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICESimon Glass
This is defined based on two other CONFIGs for all boards except sandbox and durian. For sandbox the value does not matter. For durian the value seems excessive. Drop the option completely, to simplify configuration and reduce the number of things we need to convert to Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09Convert CONFIG_SYS_IDE_MAXBUS et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_IDE_MAXBUS CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_STRIDE CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_ALT_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET CONFIG_ATAPI CONFIG_IDE_RESET Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09ide: Drop CONFIG_IDE_AHBSimon Glass
This is not used in U-Boot anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-21configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to KconfigPatrick Delaunay
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries to defconfigs. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> [trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to KconfigAlexandru Gagniuc
Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21Convert CONFIG_BOOTP_SERVERIP to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_BOOTP_SERVERIP Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21Convert CONFIG_KEEP_SERVERADDR to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_KEEP_SERVERADDR Drop the preprocessor usage also. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-12LynxOS is no longer supportedThomas Huth
LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed a lynxkdi_boot() function, where the last implementation had been removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-28Merge tag 'video-next-20211228' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video into next - various fixes to the sandbox display support - support for showing a logo without splash screen config - support for BMP drawing to depths other than 16bpp - tests for the different types of supported BMP images - support showing a logo when running coreboot via qemu
2021-12-27Convert CONFIG_JFFS2_DEV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND CONFIG_JFFS2_PART_OFFSET CONFIG_JFFS2_PART_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to KconfigTom Rini
Because of how these symbols work, and the remaining board config.h file uses, we need to do these at the same time. In some cases we just get to move rather directly to the defconfigs. A few cases require manual intervention. For the case of the eb_cpu5282 we need to select HW_WATCHDOG for the target, given how it's implemented. For the cases of m53menlo, dh_imx6, display5, and display5_factory we disable SPL watchdog support as the particular combination of options they want would require either more symbols or enabling SPL_DM. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-26video: Convert CONFIG_VIDEO_LOGO to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_LOGO Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is deprecated. The only relevant code is now in splash.c Drop the check for DM_VIDEO in that file. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23fdt: Add a Kconfig for boards with a prior stageSimon Glass
When U-Boot is started from another firmware program, not just a prior phase of U-Boot, special behaviour is typically used. In particular, the device tree may come from that prior stage. At present this is sort-of indicated by OF_BOARD, although the correlation is not 1:1, since that option simply means that the board has a custom mechanism for obtaining the device tree. For example, sandbox defines OF_BOARD. Also the board_fdt_blob_setup() function can in fact make use of the devicetree in U-Boot if it wishes, as used by dragonboard410c until very recently. Add an explicit Kconfig for this situation. Update the OF_BOARD option to more-accurately reflect what it is doing, e.g. for sandbox. Drop the docs in the README as it is out of date. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17Convert CONFIG_PHYSMEM to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_PHYSMEM Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Sean Anderson <seanga2@gmail.com>
2021-12-05ide: Drop unused CONFIG optionsSimon Glass
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use ATA_PORT_ADDR() locally instead. Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also unused. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05Convert CONFIG_KEYBOARD to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_KEYBOARD Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-01Convert CONFIG_SYS_BR0_PRELIM et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BR0_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR3_PRELIM CONFIG_SYS_OR3_PRELIM CONFIG_SYS_BR4_PRELIM CONFIG_SYS_OR4_PRELIM CONFIG_SYS_BR5_PRELIM CONFIG_SYS_OR5_PRELIM CONFIG_SYS_BR6_PRELIM CONFIG_SYS_OR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_OR7_PRELIM This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms that can set these values do so. Add the relevant SYS_BRx_PRELIM_BOOL to platforms that had not been previously migrated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-16doc: Move environment documentation to rSTSimon Glass
Move this from the README to rST format. Drop i2cfast since it is obviously obsolete and breaks the formatting. Other changes and improvements are in a following patch. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Behún <marek.behun@nic.cz>
2021-11-12Convert CONFIG_PL011_SERIAL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PL011_SERIAL CONFIG_PL01X_SERIAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_E1000 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E1000 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-11Create a new boot/ directorySimon Glass
Quite a lot of the code in common/relates to booting and images. Before adding more it seems like a good time to move the code into its own directory. Most files with 'boot' or 'image' in them are moved, except: - autoboot.c which relates to U-Boot automatically running a script - bootstage.c which relates to U-Boot timing Drop the removal of boot* files from the output directory, since this interfers with the symlinks created by tools and there does not appear to be any such file from my brief testing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-05Convert CONFIG_SPL_DRIVERS_MISC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_OF_EMBED to KconfigTom Rini
This converts the following to Kconfig: CONFIG_OF_EMBED Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-10-06Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01kgdb: Remove unused serial related optionsTom Rini
We have a few CONFIG options for KGDB that are not referenced, remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-21net: remove unused CONFIG_DRIVER_AT91EMAC_*Eugen Hristev
AT91EMAC driver is unused, thus removing. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13pci: Drop PCI_INDIRECT_BRIDGESimon Glass
This does not work with driver model so can be removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-07arm: Finish migration of CONFIG_MACH_TYPETom Rini
As this is only useful when booting with ATAGs, which are now largely disabled, remove this value for the remaining platforms. We have a few places in the code that had been testing for MACH_TYPE as a sort of internal logic. Update those to use different but still correct CONFIG symbols. Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_RAMBOOT_PBL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RAMBOOT_PBL CONFIG_SYS_FSL_PBL_PBI CONFIG_SYS_FSL_PBL_RCW Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SYS_FSL_DDR4 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_DDR4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30README: Remove some old i2c related textTom Rini
These sections are no longer relevant, remove. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2021-08-30tegra: Cleanup I2C supportTom Rini
Remove the irrelevant section from the README and remove the non-functional SPL-undef section. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: fsl_i2c: Migrate to KconfigTom Rini
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30rcar: i2c: Migrate SYS_I2C_SH to KconfigTom Rini
- Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: Remove non-DM code from ihs_i2c.cTom Rini
This driver and it's only user are converted to DM_I2C, remove legacy code. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespaceTom Rini
The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: Remove unused additional legacy soft i2c bus supportTom Rini
Currently the legacy software i2c support is only used for a single bus. Remove all of the extra and unused support. Also update the README to not reference that, and finish removing some already badly auto-edited related text. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02doc: Convert command-line info to rSTSimon Glass
Take this part of the README and put it into rST format. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28README: Fix hyphenation in the directory docsSimon Glass
Hyphens are missing in various places where the intent is to create an adjective. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-23 18:30:12 +0000