summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2022-04-06update CAAM MAINTAINERGaurav Jain
updated CAAM driver files maintainer. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-03-18MAINTAINERS: add rockchip regex for more files and directoriesJohan Jonker
The current files and directories with wildcard patterns for Rockchip patches in MAINTAINERS is not always complete. Add the regex for DT related files and a generic regex for catching some other forgotten cases, so that the maintainers receive all Rockchip related patches. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-03-15k210: use the board vendor name rather than the marketing nameDamien Le Moal
"kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-08MAINTAINERS: Add watchdog maintainers entryStefan Roese
I've been handling "inofficially" the watchdog related patches for a few years now. Let's make this official and add a tree for it and also add myself here in the MAINTAINERS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Harald Seiler <hws@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-02-28gpio: add sl28cpld driverMichael Walle
The gpio block is part of the sl28cpld sl28cpld management controller. There are three different flavors: the usual input and output where the direction is configurable, but also input only and output only variants. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28watchdog: add sl28cpld watchdog driverMichael Walle
The watchdog timer is part of the sl28cpld management controller. The watchdog timer usually supervises the bootloader boot-up and if it bites the failsafe bootloader will be activated. Apart from that it supports the usual board level reset and one SMARC speciality: driving the WDT_TIMEOUT# signal. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-28misc: add sl28cpld base driverMichael Walle
Add a multi-function device driver which will probe its children and provides methods to access the device. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-15power: zynqmp: Add power domain driver for ZynqMPMichal Simek
Driver should be enabled by CONFIG_POWER_DOMAIN=y and CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node but it uses zynqmp firmware DT node that's why there is a need to bind driver when firmware node is found. Driver itself is simple. It is sending pmufw config object overlay for enabling access to device which is done in ...domain_request(). In ...domain_on() capabilities are passed and node is requested. This should be bare minimum of required to get power domain driver working. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com
2022-02-11tools: mkeficapsule: add man pageAKASHI Takahiro
Add a man page for mkeficapsule command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-02-10MAINTAINERS: Update list of Armada 385 and Armada 3720 driversPali Rohár
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-08dts: am57xx*: Add ipu early boot DT changesKeerthy
Add support for ipu early boot. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-02-08dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodesKeerthy
Add all the ipu early boot related nodes Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-02-08remoteproc: ipu: Add driver to bring up ipuKeerthy
The driver enables IPU support. Basically enables the clocks, timers, watchdog timers and bare minimal MMU and supports loading the firmware from mmc. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-02-08reset: dra7: Add a reset driverKeerthy
Add a reset driver to bring IPs out of reset. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: reset_ops structure member "free" has been renamed to "rfree", use the latter instead] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-01-25acpi: Add myself as maintainerSimon Glass
Add myself as maintainer of the generic ACPI code, until someone else steps up to take it on. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-24MAINTAINERS: Update e-mail in Xen maintainershipAnastasiia Lukianenko
Changing e-mail because of leaving EPAM. Signed-off-by: Anastasiia Lukianenko <vicooodin@gmail.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2022-01-19Merge tag 'xilinx-for-v2022.04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc1 gpio: - Add modepin driver net: - Save random mac addresses to eth variable zynqmp gem: - Add support for mdio bus DT description - Add support for reset and SGMII phy configuration - Reduce timeout for MDIO accesses zynqmp clk: - Fix clock handling for gem and usb phy: - Add zynqmp phy/serdes driver serial: - Add one missing compatible string microblaze: - Symbol alignement - SPL fixups - Code cleanups zynqmp: - Various dt changes, DP pre-reloc, gem resets, gem clocks - Switch SOM to shared psu configuration - Move dcache handling to firmware driver - Workaround gmii2rgmii DT description issue - Enable broadcasts again - Change firmware enablement logic - Small adjustement in firmware driver versal: - Support new mmc@ DT nodes - Fix run time variable handling - Add missing I2C_PMC ID for power domain
2022-01-15MAINTAINERS: remove Alexander Graf from EFI PAYLOADHeinrich Schuchardt
The last review by Alex was in 2019. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-13watchdog: Add a driver for the Apple watchdogMark Kettenis
This driver supports the watchdog timer found on Apple's M1 SoC. On systems that use these SoC, the watchdog timer is the primary way to reboot the system. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
2022-01-12phy: zynqmp: Add serdes/psgtr driverMichal Simek
Add PSGTR driver for Xilinx ZynqMP. The most of configurations are taken from Linux kernel psgtr driver. USB3.0 and SGMII configurations are tested on SOM. In SGMII case also IOU_SLCR reg is updated to get proper clock setup and signal detection configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/36e6e9d3baf8511af1916e91e4887032ca2b6c20.1641458978.git.michal.simek@xilinx.com
2022-01-05zynqmp: gpio: Add support for zynqmp gpio modepin driverT Karthik Reddy
ZynqMP modepin driver has capability to get/set/check status of modepin gpios. These modepins are accessed using xilinx firmware. In modepin register, [3:0] bits set direction, [7:4] bits read IO, [11:8] bits set/clear IO. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2d802d98fd56d95d764532a33e844d935e0cebb3.1635505900.git.michal.simek@xilinx.com
2021-12-20Merge tag 'v2022.01-rc4' into nextTom Rini
Prepare v2022.01-rc4
2021-12-19arm: mvebu: serial: Add me as co-maintainer and author of Marvell serial driversPali Rohár
There is no maintainer entry for serial_mvebu_a3700.c. Add entry with Pali and Stefan as maintainers. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19arm: mvebu: pci: Add me as co-maintainer and author of Marvell PCIe driversPali Rohár
There is no maintainer entry for pci-aardvark.c. Add entry for pci-aardvark.c and pci_mvebu.c with Pali and Stefan as maintainers. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-09efi: Add uclass for devices provided by UEFI firmwareSimon Glass
UCLASS_EFI_LOADER is used for devices created by applications and drivers loaded by U-Boots UEFI implementation. This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices that provided by a UEFI firmware calling U-Boot as an EFI application. If the two uclasses can be unified, is left to future redesign. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-29Merge tag 'v2022.01-rc3' into nextTom Rini
Prepare v2022.01-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-29fastboot: Add maintainers entrySean Anderson
Add an entry in maintainers for fastboot. It is starting off orphaned, but hopefully someone can pick it up. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-11-29clk: Add myself as a maintainer for the clock subsystemSean Anderson
Lukasz has not been very responsive in reviewing clock patches. Add myself as a maintainer. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-11-17pinctrl: Add Apple pinctrl driverMark Kettenis
This driver supports both pin muxing and GPIO support for the pin control logic found on Apple SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-11-16env: Allow U-Boot scripts to be placed in a .env fileSimon Glass
At present U-Boot environment variables, and thus scripts, are defined by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text to this file and dealing with quoting and newlines is harder than it should be. It would be better if we could just type the script into a text file and have it included by U-Boot. Add a feature that brings in a .env file associated with the board config, if present. To use it, create a file in a board/<vendor> directory, typically called <board>.env and controlled by the CONFIG_ENV_SOURCE_FILE option. The environment variables should be of the form "var=value". Values can extend to multiple lines. See the README under 'Environment Variables:' for more information and an example. In many cases environment variables need access to the U-Boot CONFIG variables to select different options. Enable this so that the environment scripts can be as useful as the ones currently in the board config files. This uses the C preprocessor, means that comments can be included in the environment using /* ... */ Also support += to allow variables to be appended to. This is needed when using the preprocessor. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-11-10MAINTAINERS: Add entry for TPM driversIlias Apalodimas
TPM drivers have currently no maintainers. Add myself since I contributed the TIS implementation. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-07efi: Create a 64-bit appSimon Glass
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Add a script to build an image for testing on UEFISimon Glass
It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-31spmi: msm: add arbiter version 5 supportDzmitry Sankouski
Currently driver supports only version 1 and 2. Version 5 has slightly different registers structure Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31serial: qcom: add support for GENI serial driverDzmitry Sankouski
Generic Interface (GENI) Serial Engine (SE) based uart can be found on newer qualcomm SOCs, starting from SDM845. Tested on Samsung SM-G9600(starqltechn) by chain-loading u-boot with stock bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31arm: apple: Add initial support for Apple's M1 SoCMark Kettenis
Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add MAINTAINERS entry]
2021-10-21efi: Add a separate maintainer entry for the appSimon Glass
Separate this out slightly from the payload, with a new entry. We might consider renaming EFI PAYLOAD to EFI LOADER, but that would require quite a lot of file changes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-19Revert "kbuild: remove unused dtc-version.sh script"Simon Glass
We need this to make building dtc optional. It makes no sense to build our own dtc if the system one works correctly. This reverts commit ddb87a0b40262ff99d675e946f57427642303938. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-07sysreset: provide SBI based sysreset driverHeinrich Schuchardt
Provide sysreset driver using the SBI system reset extension. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Samuel Holland <samuel@sholland.org>
2021-10-01MAINTAINERS: Add entry for kwbimage / kwboot toolsMarek Behún
Add entry for these tools with Marek, Pali and Stefan as maintainers. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini
Prepare v2021.10-rc5
2021-09-24MAINTAINERS: remove SPEAR entryPatrick Delaunay
As the lastest spear directories are removed, delete the associated entry in the MAINTAINERS file: - arch/arm/cpu/arm926ejs/spear/ - arch/arm/include/asm/arch-spear/ Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-09-21include: dt-bindings: mfd: add atmel flexcom include fileEugen Hristev
Add dt-bindings include file for Atmel Flexcom hardware block. This file is copied from Linux kernel. It is used in devicetrees from Linux. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-09-17MAINTAINERS: POWERPC MPC8XX: Update email addressChristophe Leroy
Our email addresses have changed from @c-s.fr to @csgroup.eu Update entry in MAINTAINERS Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-09MAINTAINERS: Update ARM TI entryLokesh Vutla
Move TI maintainership to Tom. Updated with the following commands: find ./ -name MAINTAINERS | xargs sed -i s/"Lokesh Vutla <lokeshvutla@ti.com>"/"Tom Rini <trini@konsulko.com>"/g Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Tom Rini <trini@konsulko.com>
2021-09-01MAINTAINERS: Add new drivers for ARM U8500Stephan Gerhold
Update MAINTAINERS with various drivers for ARM U8500 that were added during the U-Boot 2021.10 merge window. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-08-26soc: xilinx: versal: Add soc_xilinx_versal driverT Karthik Reddy
soc_xilinx_versal driver allows identification of family & revision of versal SoC. This driver is selected by CONFIG_SOC_XILINX_VERSAL. Probe this driver using platdata U_BOOT_DEVICE structure which is defined at mach-versal/cpu.c. Add this config to xilinx_versal_virt_defconfig & xilinx_versal_mini_ospi_defconfig file to select this driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driverT Karthik Reddy
soc_xilinx_zynqmp driver allows identification of family & revision of zynqmp SoC. This driver is selected by CONFIG_SOC_XILINX_ZYNQMP. Add this config to xilinx_zynqmp_virt_defconfig file. Probe this driver using platdata U_BOOT_DEVICE structure which is specified in mach-zynqmp/cpu.c. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-02 07:22:06 +0000