summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-23dm: implement a Miscellaneous uclassThomas Chou
Implement a Miscellaneous uclass with generic read or write operations. This class is used only for those do not fit other more general classes. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-23serial: remove altera serial initializationsThomas Chou
Both altera_jtag_serial_initialize() and altera_serial_initialize() are no longer used after they are converted to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: convert altera timer to driver modelThomas Chou
Convert altera timer to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com>
2015-10-23timer: start a new timer after relocationThomas Chou
Start a new timer after relocation, just in case the timer has been used in per-relocation. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-23dm: implement a Timer uclassThomas Chou
Implement a Timer uclass to work with lib/time.c. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: convert nios2 cpu to driver modelThomas Chou
Convert nios2 cpu to driver model. The cpu parameters are extracted from device tree and saved to global data structure. We will use them to replace the custom_fpga.h . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2 : convert altera_pio to driver modelThomas Chou
Convert altera_pio to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: add clear and set bits macrosThomas Chou
These macros can be used to clear and set multiple bits in a register using a single call. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
2015-10-23spi : convert altera_spi to driver modelThomas Chou
Convert altera_spi to driver model Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-10-23nios2: convert altera_uart to driver modelThomas Chou
Convert altera_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: convert altera_jtag_uart to driver modelThomas Chou
Convert altera_jtag_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: map physical address to uncached virtual addressThomas Chou
Add ioremap() to map physical address to uncached virtual address. We need this to convert the reg address from the device tree. The order of headers inclusion in interrupts.c is changed because common.h will include board header that contains IO_REGION_BASE. In the future, the IO_REGION_BASE should be decided from the device tree. tree Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: enable malloc() pool before relocationThomas Chou
Enable malloc() pool before relocation, because this is needed to use serial uclass. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: call board_init_f_memThomas Chou
We will need CONFIG_SYS_MALLOC_F_LEN to use serial uclass. So we shall undefine CONFIG_SYS_GENERIC_GLOBAL_DATA, and call board_init_f_mem() to allocates early malloc() memory with size of CONFIG_SYS_MALLOC_F_LEN in board_f.c. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: zap version_stringThomas Chou
There is a weak version_string[] at common/cmd_version.c . Remove the one in start.S. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: zap dly_clksThomas Chou
The dly_clks() in start.S is no use after switching to generic timer. Remove it. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: Split timer code into timer.cThomas Chou
Move the timer code from interrupts.c into timer.c . Eliminate the installation of timer interrupt handler, which is no longer used. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: Switch to generic timerThomas Chou
Zap almost all of the ad-hoc timer code from interrupts.c and use the code in lib/time.c instead. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: enable Driver ModelThomas Chou
Enable the Driver Model config. The driver subsystems are not enabled until we enable each of them. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: enable device tree control of U-BootThomas Chou
This patch adds device tree control of U-Boot to nios2 boards. The example dts is taken from Linux kernel. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: define _end in link scriptThomas Chou
Since commit 44c6e6591cb451ae606f8bde71dd5fb7b4002544 "rename _end to __bss_end__" , the _end was removed. But we need it now for separated device tree control, ie, CONFIG_OF_SEPARATE . The _end is used by fdtdec_setup() to find the blob. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: remove gp assignments in link scriptThomas Chou
Since we don't use gp for small data with option "-G0", we use gp as global data pointer. The _gp location is not needed. The ALIGN(16) was for gp only. It is removed, so that we can get correct address of dtb in u-boot-dtb.bin image. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: enlarge the code relocation rangeThomas Chou
As we will use u-boot-dtb.bin, the code relocation range should be adjusted to accommodate the additional dtb. It might be overkilled to look into dtb header to find the dtb size, so we will simply use CONFIG_SYS_MONITOR_LEN. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: BSS should be cleared only after board_init_fThomas Chou
As dtb in u-boot-dtb.bin overlapped the BSS section, we should delay the clearing of BSS until dtb is relocated in board_init_f(). Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: move altera_pio_init to board_early_init_rThomas Chou
As altera_pio_init() uses BSS, it should be moved to board_early_init_r(). Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: permit device tree control of U-BootThomas Chou
Enable this in the Kconfig so that nios2 boards can use device tree to configure U-Boot. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: enable CONFIG_NET_RANDOM_ETHADDRThomas Chou
Enable CONFIG_NET_RANDOM_ETHADDR to generate a random MAC address when ETHADDR is not set. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Cc: Joe Hershberger <joe.hershberger@ni.com>
2015-10-23nios2: move command line configuration to KconfigThomas Chou
This patch moves command line configuration from board header file to board defconfig in the way of Kconfig. The change passed savedefconfig. This fixes warnings such as : "CONFIG_SYS_HUSH_PARSER" redefined, when "Use hush shell" is selected with menuconfig, etc. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-22ARM: AM335x: mux: change mmc0 cd pinmux from mmc0_sdcd to gpioMugunthan V N
Currently omap_hsmmc driver doesn't use sdcd pin to detect whether the card is present or not. Instead the same pin is used as GPIO to detect card presence. So change the pin mux mode from mmc0_sdcd to gpio0_6. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22drivers: gpio: omap: add support for parsing additional gpio parametersMugunthan V N
With DM_GPIO, gpio parameters like ACTIVE_(LOW/HIGH) are to be parsed in xlate gpio drivers-ops. Since xlate is not implemented in omap_gpio driver, the driver considers all gpio to be ACTIVE_HIGH which is the default case and fails to return actual gpio status for ACTIVE_LOW gpios. So adding .xlate ops to omap_gpio. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22am437x: Add am57xx_evm_defconfig using CONFIG_DMMugunthan V N
Import various DT files for am57xx-beagle-x15 from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22ti_omap5_common: mmc: do not define DM_MMC for splMugunthan V N
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> asdfsadf
2015-10-22am437x: Add am437x_sk_evm_defconfig using CONFIG_DMMugunthan V N
Import various DT files for am437x-sk-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22am437x: Add am437x_gp_evm_defconfig using CONFIG_DMMugunthan V N
Import various DT files for am4372, an43xx pinctrl and am437x-gp-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22am43xx_evm: mmc: do not define DM_MMC for splMugunthan V N
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22am43xx_evm.h: : switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIALMugunthan V N
Tested on am437x gp evm and am437x sk evm Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22drivers: serial: serial_omap: add comaptibles for all ti platformsMugunthan V N
Adding compatibles for am335x, am437x and dra7 platforms. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22drivers: serial: serial_omap: populate default clock frequency when not ↵Mugunthan V N
found in dt In some platforms like am437x, serial node is not populated with clock-frequency node. So in that case have a default clock-clock frequency. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22defconfig: am335x: gp_evm: enable mmc driver modelMugunthan V N
enable mmc driver model for am335x gp_evm as omap_hsmmc supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22defconfig: am335x: bbb: enable mmc driver modelMugunthan V N
enable mmc driver model for am335x bbb as omap_hsmmc supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22drivers: mmc: omap_hsmmc: convert driver to adopt device driver modelMugunthan V N
adopt omap_hsmmc driver to device driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22am335x_evm: mmc: do not define DM_MMC for splMugunthan V N
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22omap_hsmmc: update struct hsmmc to accomodate base address from DTMugunthan V N
Existing driver gets the actual omap hammc base address + 0x100 bytes as the first 0x100 bytes is not used by the driver. But with DM conversion the base address from DT is different, to accommodate the offset adding res0[0x100] to struct hsmmc. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22dra7xx: Add dra74_evm_defconfig using CONFIG_DMMugunthan V N
Import various DT files for dra7-evm from Linux Kernel v4.2 Add config file for this board, enable DM and DM_GPIO Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22ARM: k2g: Add config fileLokesh Vutla
Add config file for k2g Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
2015-10-22ARM: dts: k2g: Add DT supportLokesh Vutla
Add basic DT support for k2g evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22ARM: k2g: Enable SPI flashLokesh Vutla
GPIO1_9 controls SPI flash on k2g evm. So make GPIO1_9 as output pin, inorder to use SPI. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22ARM: k2g: add SD card and eMMC supportRoger Quadros
Add MMC support for k2g Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22ARM: k2g: Add Ethernet SupportVitaly Andrianov
Add Ethernet support for tftp support Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22driver: net: keystone_net: removing unused codeMugunthan V N
remove unused code as the same is achieved when configuring sgmii and link status is verifed. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 18:44:36 +0000