summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-18mmc: enable partition switch function for emmcLei Wen
For emmc, it may have up to 7 partitions: two boot partitions, one user partition, one RPMB partition and four general purpose partitions. (Refer to JESD84-A44.pdf/page 154) As bootloader may need to read out or reflashing images on those different partitions, it is better to enable the partition switch with console command support. Also for partition would be restore to user partition(part 0) when CMD0 is used, so change mmc_init routine to perform normal initialization only once for each slot, unless use the rescan command to force init again. Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com>
2011-05-18cmd_mmc: eliminate device num in the mmc commandLei Wen
mmc command applied device, like ide and usb... Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com>
2011-05-18mmc_spi: generate response for send status commandThomas Chou
A "send status" command is added with the commit "mmc: checking status after commands with R1b response". But the status register returned from send status command of SPI protocol is different from that of MMC/SD protocol. We do a simple test and generate a response in stead of full bit-by-bit translation. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2011-05-18Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: (40 commits) avr32: add ATAG_BOARDINFO at91: reworked support for otc570 board at91: reworked support for meesc board hammerhead: move CONFIG_SYS_TEXT_BASE to header mimc200: move CONFIG_SYS_TEXT_BASE to header favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header atstk100x: move CONFIG_SYS_TEXT_BASE to header atngw100: move CONFIG_SYS_TEXT_BASE to header mimc200: fix "#define XXXX 1" hammerhead: fix "#define XXXX 1" favr-32-ezkit: fix "#define XXXX 1" atstk1006: fix "#define XXXX 1" atstk1004: fix "#define XXXX 1" atstk1003: fix "#define XXXX 1" atstk1002: fix "#define XXXX 1" atngw100: fix "#define XXXX 1" avr32: use single linker script avr32/config.mk: simplify PLATFORM_RELFLAGS avr32: fix linking Add support for Bluewater Systems Snapper 9260 and 9G20 modules ...
2011-05-18Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
* 'master' of git://git.denx.de/u-boot-nand-flash: nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance
2011-05-18avr32: add ATAG_BOARDINFOAndreas Bießmann
This patch adds a new ATAG_BORADINFO to U-Boot. This tag is intended to hand over the bd->bi_board_number to the linux kernel for early stage board information like a board revision or other kind of board specific decisions necessary before the linux peripherial drivers are up. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18at91: reworked support for otc570 boardDaniel Gorsulowski
The otc570 board support was broken. Within this opportunity, I completely reworked the board files. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2011-05-18at91: reworked support for meesc boardDaniel Gorsulowski
The meesc board support was broken. Within this opportunity, I completely reworked the board files. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2011-05-18hammerhead: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18mimc200: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atstk100x: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atngw100: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18mimc200: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18hammerhead: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18favr-32-ezkit: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atstk1006: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atstk1004: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atstk1003: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atstk1002: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18atngw100: fix "#define XXXX 1"Andreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32: use single linker scriptAndreas Bießmann
This patch move the atstk100x linker script to $(CPUDIR) and delete other pure copies of this file in each board directory. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32/config.mk: simplify PLATFORM_RELFLAGSAndreas Bießmann
This patch removes PLATFORM_RELFLAGS from board specific config.mk files and define them in arch specific config.mk file. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32: fix linkingAndreas Bießmann
This patch fixes following error: ---8<--- avr32-linux-ld: --gc-sections and -r may not be used together --->8--- Since 8aba9dceebb14144e07d19593111ee3a999c37fc all avr32 boards are broken due to linking error as seen above. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18Add support for Bluewater Systems Snapper 9260 and 9G20 modulesRyan Mallon
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
2011-05-18at91: fixed at91sam9263 system fileDaniel Gorsulowski
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2011-05-18remove __attribute__ ((packed)) in at91 headersJens Scharsig
* remove __attribute__ ((packed)) to prevent byte access to soc registers in some gcc version Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2011-05-18at91rm9200: fix lowlevel_init() SMRDATA sizeJens Scharsig
* use start/end label for initialization tables instead of fix values Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-05-18AT91: fix timer.c - remove reset_timer()Reinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix at91sam_wdt.c to reworked header filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: remove LEGACY from at91_rstc.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18ATMEL: fix dataflash (dirty) this file should be converted to struct SoC accessReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: change includes from asm/arch/io.h to asm/io.hReinhard Meyer
and remove the now unused asm/arch-at91/io.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: cleanup at91sam9260_matrix.h to struct SoC accessReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18ATMEL: fix related common atmel driver filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related at91 driver filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related at91 system/driver filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related arch-at91 header filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: cleanup hardware.h, remove memory-map.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9g45.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9263.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9261.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9260.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18avr32: fixup definitions to ATMEL_BASE_xxxAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18avr32: rename memory-map.h -> hardware.hAndreas Bießmann
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-16nios2: Make STANDALONE_LOAD_ADDR configurable per boardThomas Chou
Follow commit 8ae86b76c648d8bef97241c78e2fddb1c4f164d3 which changed the variable name. Fix this error, nios2-elf-ld: invalid hex number `-o' Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2011-05-16nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occuranceStefan Roese
Remove the last CONFIG_SYS_NAND_READ_DELAY occurance from nand_boot.c. I missed this one in patch a9c847cb [nand_spl: nand_boot.c: Remove CONFIG_SYS_NAND_READ_DELAY]. This fixes a compile breakage on kilauea_nand for example. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-05-15Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2011-05-15Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2011-05-13nand_spl: nand_boot.c: Remove CONFIG_SYS_NAND_READ_DELAYStefan Roese
There are multiple reasons why this define should be removed: First it saves some space and therefore fixes a problem we have on the canyonlands_nand and glacier_nand targets right now. Second, the define was hackish and would most likely not work on all board using nand_boot.c. Boards not providing a real dev_ready() function should implement a board specific function instead. I checked and it seems, that all boards using nand_boot.c right now already implement a board specific dev_ready() function. So this patch should not break any boards and will result in smaller NAND_SPL images. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Sughosh Ganu <urwithsughosh@gmail.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Tested-by: Sughosh Ganu <urwithsughosh@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 15:19:31 +0000