summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-10ppc4xx: Fix USB 2.0 phy reset sequenceMatthias Fuchs
This patch fixes USB 2.0 communication issues on some DU440 boards. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-10ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 boardMatthias Fuchs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-10ppc4xx: Fix DU440 GPIO configurationMatthias Fuchs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-10ppc4xx: Update DU440 configMatthias Fuchs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-08ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR changeAdam Graham
After changing SDRAM_CLKTR phase value rerun the memory preload initialization sequence (INITPLR) to reset and relock the memory DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing adjustment effects the phase relationship of the internal, to the PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT. Signed-off-by: Adam Graham <agraham@amcc.com> Signed-off-by: Victor Gallardo <vgallardo@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-23Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese
2008-09-22ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixupStefan Roese
Depending on the configuration jumper "SATA SELECT", U-Boot disabled either one PCIe node or the SATA node in the device tree blob. This patch removes the unnecessary and even confusing warning, when the node is not found at all. Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-22Add missing device types to dev_print() in part.cRemy Bohmer
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2008-09-22Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, whichWolfgang Denk
eventually leads to a machine check. This change assures that DPRAM is allocated only once in that case. Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-22Fix Spartan-3 definitions.Laurent Pinchart
A few Spartan-3 definitions erroneously use Spartan-3E size constants. This patch fixes them. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
2008-09-22Remove duplicate Spartan-3E definition.Laurent Pinchart
Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-22socrates: change default mtest address rangeAnatolij Gustschin
Running mtest command on socrates without specifying an address range crashes the board. This patch changes default mtest address range to prevent this behavior. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-22socrates: fix crash after relocationAnatolij Gustschin
Currently U-Boot crashes after relocation to RAM. Changing the CPO value of the DDR SDRAM TIMING_CFG_2 register to READ_LAT + 1 (to the value it was before conversion of socrates to new DDR code) fixes the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-22socrates: fix SPD EEPROM addressAnatolij Gustschin
Commit be0bd8234b9777ecd63c4c686f72af070d886517 changed SPD EEPROM address to 0x51 and DDR SDRAM detection stopped working. Change this address back to 0x50. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-22Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese
2008-09-22Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"Stefan Roese
This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8. Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-21Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2008-09-19sh: Fix compile warningNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19sh: Add support watchdog for SH4A coreNobuhiro Iwamatsu
Add support watchdog for SH4A core (SH7763, SH7780 and SH7785). And fix some compile warning. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19sh: Fix typo in SH serial driverNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19sh: Add support any page size and empty_zero_page to SH Linux uImageNobuhiro Iwamatsu
Old U-Boot supported 4KB page size only. If this version, Linux kernel can not get command line from U-Boot. SH Linux kernel can change page size and empty_zero_page. This patch support this function and fix promlem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19sh: rsk7203: Add support pkt_data_pull and pkt_data_push functionNobuhiro Iwamatsu
Add function of smc911x, pkt_data_pull and pkt_data_push. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-18ADS5121: fix typo in "rootpath" default settingWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-17Coding style cleanup; update CHANEGLOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-16ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)Victor Gallardo
Signed-off-by: Victor Gallardo <vgallardo@amcc.com> Signed-off-by: Adam Graham <agraham@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-16Support for multiple SGMII/TBI interfaces for TSEC ethernetPeter Tyser
Fix TBI PHY accesses to use the proper offset in CPU register space. The previous code would incorrectly access the TBI PHY by reading/writing to CPU register space at the same location as would be used to access external PHYs. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
2008-09-16TQM8xx: Fix CFI flash driver support for all TQM8xx based boardsWolfgang Denk
After switching to using the CFI flash driver, the correct remapping of the flash banks was forgotten. Also, some boards were not adapted, and the old legacy flash driver was not removed yet. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-14Prepare v2008.10-rc2v2008.10-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-13Coding style cleanup, update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-13Update mailing list email and archive addressesPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-09-1385xx: socrates: autoprobe Lime chipu-boot@bugs.denx.de
This patch is an attempt to implement autoprobing for the Lime presence on the bus. Configure GPCM for Lime CS2 and try to access chip ID registers. Second read atempt delivers register values if the chip is present. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-1385xx: socrates: Add support for new image format.u-boot@bugs.denx.de
Signed-off-by: Detlev Zundel <dzu@denx.de>
2008-09-13sh: Fix compile error for r2dplusNobuhiro Iwamatsu
netdev.h was not include by r2dplus. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2008-09-13powerpc: Fix bootm to boot up again with a RamdiskHeiko Schocher
Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen, and this stopped Linux from booting with a Ramdisk. This patch fixes this, by deleting the useless dummy mem reservation. When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now added to of_size, so we dont need anymore a dummy mem reservation. I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based system (=0x44 bytes) and rounded it up to 0x80). Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-13Add support for LZMA uncompression algorithm.Luigi 'Comio' Mantellini
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-13Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2008-09-12fsl_elbc_nand: ecclayout cleanupsAnton Vorontsov
This patch deletes oobavail assignments, they're calculated by the nand core code in nand_scan_tail, plus current oobavail values are wrong for the LP NANDs. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-12fsl_elbc_nand: implement support for flash-based BBTAnton Vorontsov
This patch implements support for flash-based BBT for chips working through ELBC NAND controller, so that NAND core will not have to re-scan for bad blocks on every boot. Because ELBC controller may provide HW-generated ECCs we should adjust bbt pattern and bbt version positions in the OOB free area. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-12fsl_elbc_nand: fix OOB workability for large page NAND chipsAnton Vorontsov
For large page chips, nand_bbt is looking into OOB area, and checking for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be reserved for bbt means. But ELBC driver is specifying ecclayout so that oobfree area starts at offset 1, so only one byte left for the bbt purposes. This causes problems with any OOB users, namely JFFS2: after first mount JFFS2 will fill all OOBs with "erased marker", so OOBs will contain: OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff And on the next boot, NAND core will rescan for bad blocks, then will see "0xff 0x19" pattern, and will mark all blocks as bad ones. To fix the issue we should implement our own bad block pattern: just one byte at OOB start. Though, this will work only for x8 chips. For x16 chips two bytes must be checked. Since ELBC driver does not support x16 NANDs (yet), we're safe for now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-12Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-09-12Merge branch 'Makefile-next' of git://git.denx.de/u-boot-armWolfgang Denk
2008-09-12Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-09-12Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2008-09-12MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5sWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-12ppc4xx: Enable device tree (FDT) support in zeus board portStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12ppc4xx: Fix SDRAM inititialization of multiple 405 based board portsStefan Roese
This patch fixes a problem introdiced with patch bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by initdram()]. The boards affected are: - PCI405 - PPChameleonEVB - quad100hd - taihu - zeus Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12ppc4xx: Add .gitignore file to xilinx-ppc440 boardsRicardo Ribalda Delgado
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12ppc4xx: Fix compilation of v5fx30teval_flashRicardo Ribalda Delgado
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12ppc4xx: Fix in-tree build for ppc440-generic boardsRicardo Ribalda Delgado
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12ARM: synchronize mach-types.h with linux 2.6.27-rc6Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-14 01:44:08 +0000