summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-06Always build u-boot.img when using CONFIG_SPL_FRAMEWORKHenrik Nordström
Use of uImage formatted u-boot have long been preferred, and recent changes to better support Falcon mode on MMC now enforces it on MMC. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
2013-09-06ahci: convert to use libata functions and definitionsRob Herring
libata already has similar functions as implemented in the ahci code. Refactor the code to use the libata variants and remove the dependency on ata.h. Convert some defines to use the version from libata.h. Also, remove some unnecessary memset's of bss data. This is a step toward hopefully merging ahci.c and dw_ahsata.c which are essentially the same driver. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06ahci: increase spin-up timeout to 20 secRob Herring
Based on Linux libata code, most drives are less than 10 sec, but some need up to 20 sec. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06ahci: handle COMINIT received during spin-upRob Herring
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes the link to go down and we need to re-initialize the link. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-09-06ahci: move link bring-up handling to separate functionRob Herring
Move the link bring-up handling to a separate weak function in order to allow platforms to override it. This is needed on highbank platform which needs special phy handling. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-09-06ahci: add defines for PORT_SCR_STAT register bitsRob Herring
Replace hard-coded register values with proper defines for PORT_SCR_STAT register. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-09-06ahci: fix memory leak in ata_scsiop_inquiryRob Herring
This fixes a memory leak when scsi inquiry fails. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06ahci: fix unaligned accessRob Herring
gcc 4.7 will generate unaligned accesses to local char arrays, so make them static to avoid that. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06ahci: use ports implemented map instead of num_portsRichard Gibbs
The AHCI driver was incorrectly using the Capabilities register NP (number of ports) field to determine which ports to activate. This commit changes it to correctly use the PORTS_IMPL register as a port map. Signed-off-by: Richard Gibbs <richard.gibbs@calxeda.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06standalone-examples: support custom GCC libJack Mitchell
Add support for defining the gcc lib in standalone examples as is done in the main u-boot Makefile Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
2013-09-06fs: fat: don't call disk_write with zero sector numWu, Josh
In the set_cluster() function, it will convert the buffer size to sector numbers. Then call disk_write() to write by sector. For remaining buffer, the size is less than a sector, call disk_write() again to write them in one sector. But if the total buffer size is less then one sector, the original code will call disk_write() with zero sector number. It is unnecessary. So this patch fix this. Now it will not call disk_write() if total buffer size is less than one sector. Signed-off-by: Josh Wu <josh.wu@atmel.com>
2013-09-06compiler_gcc: do not redefine __gnu_attributesJeroen Hofstee
gcc allows extensions to be non compiler specific by defining __* macros for the attributes supported by gcc. Having a different definition causes many warnings during the build (cdefs.h on FreeBSD uses __attribute((__pure__)) where u-boot uses __attribute__((pure)) for example). Do not redefine these macros to suppress these warnings. This patch ignores the checkpatch warning: WARNING: __packed is preferred over __attribute__((packed)) Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2013-09-06git-mailrc: Update MMC custodianPantelis Antoniou
Update git-mailrc with my nick and replace afleming as mmc custodian. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-06Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini
2013-09-06am335x_evm.h: Add back the actual load of the kernel imageRobert P. J. Day
Somewhere along the line of refactoring the am335x header files, the kernel image load was lost, so put it back in. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2013-09-06nios2: fix missing comment terminator from SPDX License commitThomas Chou
The commit 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Add GPL-2.0+ SPDX-License-Identifier to source files generated a warning due to a missing comment terminator. longlong.h:7:1: warning: "/*" within comment Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2013-09-03bootm: allow correct bounds-check of destinationKees Cook
While nothing presently examines the destination size, it should at least be correct so that future users of sys_mapmem() will not be surprised. Without this, it might be possible to overflow memory. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03lzo: correctly bounds-check output bufferKees Cook
This checks the size of the output buffer and fails if it was going to overflow the buffer during lzo decompression. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03lzma: correctly bounds-check output bufferKees Cook
The output buffer size must be correctly passed to the lzma decoder or there is a risk of overflowing memory during decompression. Switching to the LZMA_FINISH_END mode means nothing is left in an unknown state once the buffer becomes full. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03gzip: correctly bounds-check output bufferKees Cook
The output buffer size must not be reset by the gzip decoder or there is a risk of overflowing memory during decompression. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03documentation: add more compression configsKees Cook
This adds the missing compression config items to the README. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03sandbox: add compression testsKees Cook
This adds the "test_compression" command when building the sandbox. This tests the existing compression and decompression routines for simple sanity and for buffer overflow conditions. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03sandbox: Correct compiler warnings in cmd_bootm/cmd_ximgSimon Glass
Correct the following warnings found with sandbox when compression is enabled. cmd_bootm.c: In function 'bootm_load_os': cmd_bootm.c:443:11: warning: passing argument 4 of 'lzop_decompress' from incompatible pointer type [enabled by default] /usr/local/google/c/cosarm/src/third_party/u-boot/files/include/linux/lzo.h:31:5: note: expected 'size_t *' but argument is of type 'uint *' cmd_ximg.c: In function 'do_imgextract': cmd_ximg.c:225:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] cmd_ximg.c:225:14: warning: 'hdr' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Kees Cook <keescook@chromium.org>
2013-09-02Prepare v2013.10-rc2v2013.10-rc2Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-27omap5: Correct include order, drop CONFIG_SYS_PROMPT defineTom Rini
With the new include structure for TI platforms, we need to not define our own CONFIG_SYS_PROMPT and also need to include <configs/omap5_common.h> much sooner, so do both of these. Also drop the unused CONFIG_NET_MULTI Signed-off-by: Tom Rini <trini@ti.com>
2013-08-27Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2013-08-27i2c: fix i2c dev command for not using new frameworkHeiko Schocher
i2c dev command does not work anymore for legacy drivers because a check is executed that is valid only in the new framework. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Stefano Babic <sbabic@denx.de>
2013-08-26console: usb: kbd: To fix slow TFTP bootingJim Lin
TFTP booting is slow when a USB keyboard is installed and stdin has usbkbd added. This fix is to change Ctrl-C polling for USB keyboard to every second when NET transfer is running. My previous patch is expected to be put into usb_kbd_testc(). But it went into usb_kbd_getc() after applied. This patch is to put change in correct place. Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26console: usb: kbd: To improve TFTP booting performanceJim Lin
TFTP booting is slow when a USB keyboard is installed and stdin has usbkbd added. This fix is to change Ctrl-C polling for USB keyboard to every second when NET transfer is running. Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26NET: Add net_busy_flag if CONFIG_USB_KEYBOARD is definedJim Lin
This flag is to make console aware that NET transfer is running or not. Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26usb: ehci-mx5: Use 'bool' instead of 'unsigned char'Fabio Estevam
The 'enable' argument can be better expressed as boolean. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2013-08-26usb: ehci-mx5: Remove unneeded write to cscmr1 registerFabio Estevam
Currently we have the following behavior in ehci_hcd_init() - Read csmr1 register, clear bit 26 and then set bit 26. However a little bit later we call set_usb_phy_clk() which clears bit 26, so let's get rid of the unnecessary code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-08-26usb:dfu:g_dnl: Refactoring the string definition code for g_dnl driverLukasz Majewski
The manufacturer and product IDs are dynamically assigned when gadget is bind. Now the IDs aren't assigned at struct g_dnl_string_defs definition. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: "Egli, Samuel" <samuel.egli@siemens.com>
2013-08-26usb:dfu:g_dnl: Change number of exported configurations at composite gadgetLukasz Majewski
USB composite gadget (g_dnl) supports only one configuration. Due to that the corresponding field - bConfigurationValue has been changed. Moreover more descriptive names were chosen for relevant fields. Windows XP setup: - Thesyscon USB Descriptor Dumper - zadig_xp program for WinUSB installation (which is required by dfu-util) - dfu-util for windows (version 0.6) - TRATS target connected via USB hub to test Win XP machine. Tested at: Trats - Exynos4210 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: "Egli, Samuel" <samuel.egli@siemens.com>
2013-08-26dfu, nand, ubi: add partubi alt settings for updating ubi partitionHeiko Schocher
updating an ubi partition needs a completely erased mtd partition, see: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html So, add partubi alt setting for the dfu_alt_info environment variable to mark this partition as an ubi partition. In case we update an ubi partition, we erase after flashing the image into the partition, the remaining sektors. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com>
2013-08-26usb: Use well-known descriptor sizes when parsing configurationJulius Werner
The existing USB configuration parsing code relies on the descriptors' own length values when reading through the configuration blob. Since the size of those descriptors is always well-defined, we should rather use the known sizes instead of trusting device-provided values to be correct. Also adds some safety to potential out-of-order descriptors. Change-Id: I16f69dfdd6793aa0fe930b5148d4521f3e5c3090 Signed-off-by: Julius Werner <jwerner@chromium.org>
2013-08-26ARM: OMAP5-uevm: Add usb device reset APIDan Murphy
Add the call back to reset the LAN9730 after the FEAT_POWER has been called. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26USB: usb-hub: Add a weak function for resetting devicesDan Murphy
Add a __weak function that can be overridden to reset devices attached to an ehci devices after the FEAT_POWER has been submitted Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26ARM: OMAP5-uevm: Add USB MAC ethernet addressDan Murphy
Set the usbethaddr based on the OMAP DIE_ID registers which should be unique for each processor. Then set this as the usb ethernet MAC address. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26ARM: OMAP5-uevm: Add USB ehci support for the uEVMDan Murphy
Add the USB ehci support for the OMAP5 uEVM. Configure the uEVM mux data Add the flags to build the appropriate modules Add the usb call backs to initialize the EHCI controller Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26ARM: OMAP: USB: Fix linker error when ULPI is not definedDan Murphy
Fix the linker error for missing ulpi_reset when ulpi is not defined in the board config. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Marek Vasut <marex@denx.de>
2013-08-26ARM: OMAP5: USB: Add OMAP5 common USB EHCI informationDan Murphy
* Enable the OMAP5 EHCI host clocks * Add OMAP5 EHCI register definitions * Add OMAP5 ES2 host revision Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26omap5: uevm: Change the board name to correct nameDan Murphy
Change the board name for the sys info to 5432 uEVM Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Marek Vasut <marex@denx.de>
2013-08-22env_nand.c: support falling back to redundant env when writingPhil Sutter
Without this patch, when the currently chosen environment to be written has bad blocks, saveenv fails completely. Instead, when there is redundant environment fall back to the other copy. Environment reading needs no adjustment, as the fallback logic for incomplete writes applies to this case as well. Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
2013-08-22nand_util: delete a useless variableMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-08-22cmd_nand: Do not show usage when scrub is abortedMasahiro Yamada
When executing nand scrub, the user gets the prompt: Really scrub this NAND flash? <y/N> We do not want the annoying usage displayed when saying N here. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-08-22cmd_nand: slight optimization of nand_dump functionMasahiro Yamada
If a non-zero value is given to only_oob argument, printing the main area is skipped. With a little modification, we can skip the whole while loop. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-08-22cmd_nand: fix a memory leak in nand_dump functionMasahiro Yamada
If datbuf = memalign(ARCH_DMA_MINALIGN, nand->writesize); succeeds and oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize); fails, nand_dump function should free databuf. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-08-21Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2013-08-21Makefile: Fix build in a separated directory treeYork Sun
Fix a bug introduced by commit 3aa29dee TPL : introduce the TPL based on the SPL Signed-off-by: York Sun <yorksun@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-11 01:24:13 +0000