summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-04x86: Support QEMU x86 targetsBin Meng
This commit introduces the initial U-Boot support for QEMU x86 targets. U-Boot can boot from coreboot as a payload, or directly without coreboot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig https://patchwork.ozlabs.org/patch/479745/
2015-06-04pci: Move pci_hose_phys_to_bus() to pci_common.cBin Meng
pci_hose_phys_to_bus() is needed by several drivers. Move it to pci_common.c to avoid a broken build when CONFIG_DM_PCI is on. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-06-02board/BuR/common: fix netconsoleHannes Schmelzer
netconsole had become defective over time and cleanups. Because the feature is used very rarely nobody did take notice about this defect. With this patch the resulting syntax error on call will be fixed. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-06-02configs: remove CONFIG_NET_MULTILars Poeschel
CONFIG_NET_MULTI is not used anywhere and thus can safely be removed from the configs. Acked-by: Marek Vasut <marex@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
2015-06-02ARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQLars Poeschel
The config for pcm051 still undef'd CONFIG_USE_IRQ. This is not needed any more since it is not defined in the whole include path before. Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
2015-06-02Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-01net: Fix NET_RANDOM_ETHADDR dependenciesMichal Simek
NET_RANDOM_ETHADDR depends on lib/rand.c. This patch adds dependency to Kconfig to ensure that library is also compiled. Remove the definitions from Blackfin boards' include/configs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01net: Move the CMD_NET config to defconfigsJoe Hershberger
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01Move setexpr to KconfigJoe Hershberger
Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-01blackfin: fix build error on bct-brettl2 boardMasahiro Yamada
Commit 76ec988b062e (net: Remove all calls to net_random_ethaddr()) accidentally deleted CONFIG_TARGET_BCT_BRETTL2=y, and since then bct-brettl2 would not build. Since commit a26cd04920dc (arch: Make board selection choices optional), Kconfig actually allows such a .config file in which no board is selected, but the build never succeeds. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01sparc: fix build error on gr_ep2s60 boardMasahiro Yamada
Commit 92ac52082140 (net: Remove all references to CONFIG_ETHADDR and friends) accidentally dropped #endif. Since then, gr_ep2s60 could not build. scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h GEN include/autoconf.mk In file included from include/config.h:5:0, from ./include/common.h:18: include/configs/gr_ep2s60.h:15:0: error: unterminated #ifndef #ifndef __CONFIG_H__ ^ make[1]: *** [include/autoconf.mk] Error 1 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2015-06-01arm: rmobile: alt: Update to QoS revision 0.31 and 0.321Nobuhiro Iwamatsu
This updates r8a7794 QoS to revision 0.31 for ES1 and revision 0.321 for ES2. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-06-01arm: rmobile: gose: Update to QoS revision 0.311Nobuhiro Iwamatsu
This updates r8a7793 QoS to revision 0.311. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-06-01arm: rmobile: koelsch: Update to QoS revision 0.411Nobuhiro Iwamatsu
This updates r8a7791 QoS to revision 0.411. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-06-01arm: rmobile: lager: Update to QoS revision 0.973Nobuhiro Iwamatsu
This updates r8a7790 QoS to revision 0.973. This commit can changed from KConfig to fit contents of the QoS. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-06-01arm: rmobile: alt: Add ethernet function B supportMitsuhiro Kimura
Ethernet function of Alt board can select normal and B by DIP switch on board. But user need to set not only DIP switch but also pin function. This adds pin function of Ethernet function B. This can select from Kconfig. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-05-30Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2015-05-30Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2015-05-31ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4Masahiro Yamada
The chip select 1 of the NAND controller is available if you want to use, although the pins are shared with UART port 2. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: fix pin mux setting for USB port 2 of PH1-sLD8Masahiro Yamada
The register value should be 1, not 4. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: update DDR PHY register map for PH1-Pro5Masahiro Yamada
PH1-Pro5 includes a newer version of DDR PHY IP. Some registers have been added to the reserved areas. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDRMasahiro Yamada
Since commit 92ac52082140 (net: Remove all references to CONFIG_ETHADDR and friends), the ethernet device on UniPhier boards is not working because of the incorrect (all-zero) MAC address. Enable CONFIG_NET_RANDOM_ETHADDR to generate the random one. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: set MACH_PH1_PRO4 as default SoCMasahiro Yamada
One disadvantage of commit a26cd04920dc (arch: Make board selection choices optional) is that Kconfig could create such an insane .config file that no board is selected. As PH1-Pro4 is the main stream of UniPhier SoC family, rip off the "optional" again in favor of PH1-Pro4 as the default SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to KconfigMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefsMasahiro Yamada
This file is only built for SPL. These ifdef conditionals are unnecessary because UniPhier platform now supports UART on SPL. Show appropriate messages on error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: remove unnecessary cache coherency codeMasahiro Yamada
Cache coherency for SMP is cared by Linux. In U-Boot, the secondary CPU(s) are just sleeping. Nothing in memory is shared with the primary CPU. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: use 32 bit register access for debug UART settingMasahiro Yamada
For the same reason as commit d0c47b3ef7c5 (serial: UniPhier: use 32 bit register access), use "str" instead of "strb" for the LCR register setting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: update the vendor name of UniPhier in KconfigMasahiro Yamada
The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31ARM: UniPhier: replace <asm/io.h> with <linux/io.h>Masahiro Yamada
In the Linux coding style, it is recommended to include <linux/io.h> rather than <asm/io.h>. Follow this trend. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-29ARM: sunxi: Enable PSCI for sun8iChen-Yu Tsai
sun8i uses the same PSCI backend as sun6i, without power clamps. Since there is no secure SRAM, the backend is placed at the end of DRAM. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29ARM: sunxi: Share sun6i PSCI backend with sun8iChen-Yu Tsai
sun8i can share the PSCI backend with sun6i. Only difference is sun8i does not have CPU power clamp controls. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29ARM: sunxi: Enable PSCI for sun6iChen-Yu Tsai
Now that we have a PSCI backend for sun6i, enable it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29ARM: sunxi: Add sun6i specific PSCI implementationChen-Yu Tsai
This adds PSCI support for sun6i. So far it only supports the PWR_ON method. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29ARM: sunxi: Make PSCI code sun7i specificChen-Yu Tsai
The PSCI code only works for sun7i. Rename it with _sun7i suffix, and build only if building for sun7i. This paves the way for adding PSCI support for other platforms. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29ARM: sunxi: Document registers in PSCI codeChen-Yu Tsai
The PSCI CPU_ON code accesses quite a few registers. Document their names to make it easier to cross reference. Also explain "lock cpu" and "unlock cpu" as enabling/disabling debug access. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memoryDaniel Kochmański
This commit adds support to the sunxi SPL to load u-boot from the internal NAND. Note this only adds support to access the boot partitions to load u-boot, full NAND support to load the kernel, etc. from the nand data partition will come later. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMARoy Spliet
Make sure definitions for NAND clock and DMA gate bits are the same across boards. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29sunxi: Add DMA definitionsRoy Spliet
Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block sizeDaniel Kochmański
This change is necessary to calculate correct checksum for NAND boot. Works both for MMC and NAND. Without it BROM rejects boot image as invalid (bad checksum). (Changes block size from 0x200 to 0x2000). Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29sun9i: Add Merrii_A80_Optimus board / defconfig fileHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-29sun9i: Basic sun9i (A80) supportHans de Goede
Add initial sun9i (A80) support, only uart + mmc are supported for now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-29sunxi: Update sunxi-common.h to deal with different A1-SRAM base addr on sun9iHans de Goede
The A1 SRAM Base differs between sun9i and the others, update sunxi-common.h to deal with this, so that we do not set the initial stack pointer to point to the BROM. This avoids the need for the weird undocumented register write I previously took from the allwiner u-boot sources and which needed #ifdef-ery in start.S as it needed to be done really early on. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-29sunxi: Update sunxi-common.h to deal with different DRAM base addr on sun9iHans de Goede
The DRAM Base differs between sun9i and the others, update sunxi-common.h to deal with this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-29sunxi: Remove support for building "old-fashioned" fel binariesHans de Goede
The latest versions of the fel tool support loading normal u-boot builds directly, and this is now the preferred way to use the fel boot method. This commit removes support for the old deprecated standalone fel builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-29sunxi: Use axp221 sid on a33Hans de Goede
Unlike the A31 and the A23 the A33 actually has a SID inside the SoC again, but sid[3] is 0 (at least on some SoCs), so it is better to use the axp221 sid. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-29Merge git://git.denx.de/u-boot-usbTom Rini
2015-05-29usb: kbd: Fix key repeat not always workingHans de Goede
The usb-kbd key repeat code assumes that reports get repeated every 40 ms, this is never true when using CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP, and does not always works for CONFIG_SYS_USB_EVENT_POLL and CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE since not all usb keyboards honor the usb_set_idle() command. For CONFIG_SYS_USB_EVENT_POLL we must use usb_set_idle() since we do a blocking wait for the hid report, so if we do not tell the keyboard to send a hid report every 40ms even if nothing changes then we will block u-boot for 1s (the default u-boot usb interrupt packet timeout). Note that in this case on keyboards which do not support usb_set_idle() we loose and we actually get 1s latencies on other u-boot activities. For the other poll-methods this commit stops using usb_set_idle() and instead repeats the last received hid-report every 40 ms as long as no new hid-report is received. This fixes key-repeat not working at all with CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP and fixes it not working with keyboards which do not implement usb_set_idle() when using CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29usb: dwc2: Add support for v3 snpsid valuePeter Griffin
This has been tested to the extent that I can enumerate a asix usb networking adapter and boot a kernel over usb on the 96boards hikey u-boot port I'm currently doing. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2015-05-29ci_udc: Update the ci_udc driver to support bulk transfersSiva Durga Prasad Paladugu
Update the ci_udc driver to support bulk transfer and also added capability of having multiple dtds if requested data is more than 16K. These changes are tested for both the DFU and lthor. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-16 08:09:29 +0000