summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-05net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBLTom Rini
This value is always used at the default, rename it for now. This likely should come from the device tree if non-default, moving forward. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-04Merge tag 'fsl-qoriq-2022-7-3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next Several patches from Pali - fsl_elbc detection fix - sort p2020 dts node, drop duplicated node - p1_p2_rdb_pc board cleanup - simplify mpc85xx _start_cont jumping code
2022-07-03powerpc: mpc85xx: Simplify jump to _start_cont in flash codePali Rohár
After more patches code for jumping to _start_cont symbol in flash memory involved to code with useless mathematical operations. Currently it does: r3 := CONFIG_SYS_MONITOR_BASE + ABS(_start_cont) - CONFIG_SYS_MONITOR_BASE jump to r3 Which is equivalent of just: r3 := ABS(_start_cont) jump to r3 The purpose of that code is just to jump to _start_code symbol, independently of program counter. So branch must be done to absolute address. Trying to write: ba _start_cont just cause linker error: LD u-boot powerpc-linux-gnuspe-ld.bfd: arch/powerpc/cpu/mpc85xx/start.o: in function `switch_as': (.bootpg+0x4b8): relocation truncated to fit: R_PPC_ADDR24 against symbol `_start_cont' defined in .text section in arch/powerpc/cpu/mpc85xx/start.o make: *** [Makefile:1801: u-boot] Error 1 Probably by the fact that absolute address cannot be expressed by 24-bits. So write the code via mtlr+blr pattern as it was before and load general purpose register with absolute address of the symbol: lis r3,_start_cont@h ori r3,r3,_start_cont@l mtlr r3 blr Seems that gcc and gnu ld linker support symbol@h and symbol@l syntax like number@h and number@l without any problem. And disassembling of compiler u-boot binary proved that lis+ori instructions are called with numbers which represent halves of absolute address of _start_cont symbol. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC cardPali Rohár
From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card, Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards. So address mapping for TDM-PMC card on LBC should not be enabled on any other P1/P2 RDB board as there is no device at that TDM-PMC address. Support for P1021RDB and P1025RDB boards was already removed from mainline U-Boot in commits 6d1dd76afe85 ("board/freescale: Remove P1021RDB board support") and d521cece5adb ("board/freescale: Remove P1025RDB board support"). So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and remove all macros related to TDM-PMC address mappings. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macroPali Rohár
Add #ifdef guard for __SW_BOOT_SD macro like there are guards for all other __SW_BOOT_* macros. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03board: freescale: p1_p2_rdb_pc: Allow to compile without BOARD_NAMEPali Rohár
Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03powerpc: dts: p2020: Remove duplicate pic@40000 nodePali Rohár
DT node pic@40000 is defined explicitly in p2020-post.dtsi file and also transitionally via include file pq3-mpic.dtsi. Remove duplicate definition from p2020-post.dtsi. No change in final DTB file. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03powerpc: dts: p2020: Sort DT nodes by their addressesPali Rohár
No functional change. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-07-03mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not ↵Pali Rohár
selected ecc.mode ecc.mode is set to 0 (aliased to NAND_ECC_NONE) either when function nand_scan_ident() has not selected ecc.mode or when it selected it to none ecc mode. Distinguish between these two states by checking of node property "nand-ecc-mode" which function nand_scan_ident() uses for filling ecc.mode. This change fixes usage of none ecc mode if it is specified in DTS file. Fixes: c9ea9019c5aa ("mtd: rawnand: fsl_elbc: Use ECC configuration from device tree") Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-30Merge tag 'u-boot-at91-2022.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.10 cycle: This feature set includes mostly fixes and alignments: DT alignment with Linux for sama7g5, removal of invalid eeprom compatibles, removal of extra debug_uart_init calls for all at91 boards, support for pio4 driver pioE bank, and other minor fixes and enhancements for sam9x60 and sama5d2_icp boards.
2022-06-30Merge tag 'versal-qspi-for-v2022.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Versal QSPI/OSPI changes for v2022.10 - Add new flash types - Add cadence ospi driver for Xilinx Versal
2022-06-30gpio: atmel_pio4: add support for PIO_PORTEMihai Sain
Add support for gpio PORT E, which is available on e.g. sama7g5 SoC. Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2022-06-29Merge branch '2022-06-28-Kconfig-migrations' into nextTom Rini
- Convert a large number of CONFIG symbols to Kconfig. Of note is a large chunk of USB symbols (and dead code removal), ensuring all SPL/TPL/VPL symbols have an appropriate dependency, largely (but not entirely) removing the testing of CONFIG_SPL_BUILD in board headers, and allowing CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS to co-exist as this facilities migration of many platforms.
2022-06-29spi: cadence-qspi: Fix programming ospi flash speedT Karthik Reddy
When the requested flash speed is 0, the baudrate division for the requested speed causing drop in the performance. So set the ospi flash to operate at max frequency when requested speed is zero. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-6-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29spi: cadence_qspi: Enable apb linear mode for apb read & write operationsT Karthik Reddy
On versal platform, enable apb linear mode for apb read and write execute operations amd disable it when using dma reads. This is done by xilinx_pm_request() secure calls when CONFIG_ZYNQMP_FIRMWARE is enabled, else we use direct raw reads and writes in case of mini U-Boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-5-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29spi: cadence-qspi: reset qspi flash for versal platformT Karthik Reddy
When flash operated at non default mode like DDR, flash need to be reset to operate in SDR mode to read flash ids by spi-nor framework. Reset the flash to the default state before using the flash. This reset is handled by a gpio driver, in case of mini U-Boot as gpio driver is disabled, we do raw read and write access by the registers. Versal platform utilizes spi calibration for read delay programming, so incase by default read delay property is set in DT. We make sure not to use read delay from DT by overwriting read_delay with -1. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-4-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29arm64: versal: Add versal specific cadence ospi driverT Karthik Reddy
Add support for cadence ospi driver for Versal platform. This driver provides support for DMA read operation which utilizes cadence qspi driver. If "cdns,is-dma" DT property is specified use dma for read operation from cadence_qspi driver. As cadence_qspi_apb_dma_read() is defined in cadence_ospi_versal driver add a weak function defination in cadence_qspi driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-3-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29spi: cadence-qspi: move cadence qspi macros to header fileT Karthik Reddy
Move all the cadence macros from cadence_qspi_apb.c to cadence_qspi.h file. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-2-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29mtd: spi-nor-ids: Add support for flashes tested by xilinxAshok Reddy Soma
Add support for various flashes from below manufacturers which are tested by xilinx for years. EON: en25q128b GIGA: gd25lx256e ISSI: is25lp008 is25lp016 is25lp01g is25wp008 is25wp016 is25wp01g is25wx256 MACRONIX: mx25u51245f mx66u1g45g mx66l2g45g MICRON: mt35xl512aba mt35xu01g SPANSION: s70fs01gs_256k SST: sst26wf016b WINBOND: w25q16dw w25q16jv w25q512jv w25q32bv w25h02jv Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/1653455832-14763-1-git-send-email-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-28gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini
Move the environment text over from being set via CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over to plain text in board/gateworks/gw_ventana/gw_ventana.env. This lets us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a single environment file now. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-06-28Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environmentTom Rini
- Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOADTom Rini
The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28opos6uldev: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini
Move the environment text over from being set via CONFIG_EXTRA_ENV_SETTINGS in include/configs/opos6uldev.h and over to plain text in board/armadeus/opos6uldev/opos6uldev.env. This lets us manage env_version without a CONFIG variable. Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_RANGE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_RANGE Now that this is in Kconfig we can enforce a minimum size and so remove the check in C code to ensure range is larger than size. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28dragonboard410c: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini
With the exception of distro_boot support, we can move all of the rest of the environment changes to come from CONFIG_EXTRA_ENV_TEXT and in turn remove CONFIG_ENV_REFLASH. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28env: Remove include/generated/env.* under "make clean"Tom Rini
When running "make clean" we want to remove env.in and well as env.txt. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28env: Do not make CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS conflictTom Rini
Largely, the use of CONFIG_EXTRA_ENV_SETTINGS can be migrated directly to come from CONFIG_EXTRA_ENV_TEXT. The biggest case that cannot easily be migrated is distro_bootcmd support. Rather than block migration on this, remove the #error here so that we can being moving forward. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_USB_FAT_BOOT_PARTITION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_USB_FAT_BOOT_PARTITION Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28common: usb: Update logic for usb.o, usb_hub.o and usb_storage.oTom Rini
Now that we have consistently named symbols to enable USB host or gadget controller support in SPL or full U-Boot, we do not need to unconditionally build USB files nor depend on non-SPL symbols to know when to build these common files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28mx6memcal: Remove SPL_USB_HOSTTom Rini
As this particular platform is intended to be loaded and run a specific set of routines in SPL, we do not need the ability to further use the USB as a host device in SPL. Disable this support. Cc: Eric Nelson <eric@nelint.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Eric Nelson <eric@nelint.com>
2022-06-28usb: Remove non-DM code in ehci-fsl and xhciTom Rini
The DM_USB migration deadline has passed and this is not used in SPL. Remove this now unused code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_FPGA_STRATIX_V to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FPGA_STRATIX_V Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28fpga: Remove CONFIG_FPGA_COUNTTom Rini
This define is only currently used in a single board, and always set to one. Define this within the board code and remove other references. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_MIN_ENTRIES et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_MIN_ENTRIES CONFIG_ENV_MAX_ENTRIES Cc: Michal Simek <michal.simek@amd.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Globally remove most CONFIG_SPL_BUILD tests from config headersTom Rini
With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Remove CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE and ↵Tom Rini
CONFIG_SPL_ABORT_ON_RAW_IMAGE These symbols do not exist in mainline, remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28siemens: Move CONFIG_FACTORYSET to KconfigTom Rini
Introduce board/siemens/common/Kconfig and have it hold FACTORYSET to start with. Use select for this on the boards that need it. Cc: Anatolij Gustschin <agust@denx.de> Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28video: Migrate exynos display options to KconfigTom Rini
Following how it's done for the majority of drivers, add a new VIDEO_EXYNOS option and Kconfig file under drivers/video/exynos and list the current options there. Cc: Anatolij Gustschin <agust@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28arm: samsung: Migrate a number of symbols to KconfigTom Rini
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28arm: exynos: Remove old pwm backlight driverTom Rini
Remove the unused older exynos pwm backlight driver. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28arm: samsung: Remove dead LCD codeTom Rini
Since bb5930d5c97f ("exynos: video: Convert several boards to driver model for video") there have been no callers of any of the exynos_lcd_* family of functions. Remove these from the boards, and then remove unused logo and related code as well. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28block: ide: Remove ide_preinit functionTom Rini
The only platform currently that defines an ide_preinit function has an empty one that immediately returns. Remove this hook. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: sata_sil: Remove useless BLK guard in sata_sil.hTom Rini
Now that the driver only supports CONFIG_BLK, remove the useless guard in sata_sil.h. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_FSL_SATA_V2 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_SATA_V2 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: fsl_sata: Remove legacy non-BLK codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-08-24 17:50:03 +0000