summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-01Convert CONFIG_DEEP_SLEEP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZETom Rini
In the case of M5373EVB we always had NANDFLASH_SIZE=16, so just use it directly. In the case of M5329EVB we had not removed the rest of NAND support when saying we didn't have NAND, so instead use that to key off of rather than NANDFLASH_SIZE. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GPTom Rini
The value CONFIG_DB_784MP_GP is only used in the DDR code to refer to CONFIG_TARGET_DB_MV784MP_GP so just use that second value directly. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-01p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIMTom Rini
These are not referenced in code, drop. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCKS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCK_SYNTHESIZER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCK_SYNTHESIZER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01exynos: Drop CONFIG_CLK_*Tom Rini
We only set one of these values ever at this point, so remove dead code. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-01Convert CONFIG_SYS_USE_NORFLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_USE_NORFLASH CONFIG_SYS_USE_BOOT_NORFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01global: Remove CONFIG_SYS_USE_DATAFLASH*Tom Rini
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none of them now control anything further within their board config.h files, so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty blocks in the board config.h files. In a few places further clean up related logic. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SDCARD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SDCARD CONFIG_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01am43xx_evm_qspiboot: Remove CONFIG_SYS_EXTRA_OPTIONSTom Rini
CONFIG_QSPI is not used in the code, drop this. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01MPC837XERDB: Move CONFIG_PCIE to KconfigTom Rini
Move this symbol to the board Kconfig file. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LPUART et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LPUART CONFIG_LPUART_32B_REG And note that CONFIG_LPUART_32B_REG is unused in code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LSCHLV2 to Kconfig et alTom Rini
This converts the following to Kconfig: CONFIG_LSCHLV2 CONFIG_LSXHL Cc: Michael Walle <michael@walle.cc> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Michael Walle <michael@walle.cc>
2022-04-01mpc8548cds: Rework CONFIG_LEGACY usageTom Rini
This CONFIG option is used in one place, so pick a more direct name and migrate to Kconfig. Rework the code slightly. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_KM_COGE5UN et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KM_COGE5UN CONFIG_KM_KIRKWOOD_128M16 CONFIG_KM_KIRKWOOD CONFIG_KM_KIRKWOOD_PCI CONFIG_KM_NUSA CONFIG_KM_SUSE2 Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01kmtegr1: Drop CONFIG_KMTEGR1Tom Rini
The only usage of CONFIG_KMTEGR1 can be replaced by CONFIG_TARGET_KMTEGR1 so do so and remove this other symbol. Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01keymile: Move sourcing of common KconfigTom Rini
The way board/keymile/Kconfig is written protects the options there from being parsed on non-keymile platforms. We cannot however safely source this file from multiple locations. This does not manifest as a problem currently as there are no choice statements inside of this file (nor the sub-Kconfig files it sources). However, moving some target selection to one of these files exposes the underlying problem. Rework things so that we have this file sourced in arch/Kconfig. Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01Convert CONFIG_EMMC_BOOT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EMMC_BOOT CONFIG_MAC_ADDR_IN_SPIFLASH CONFIG_NAND_BOOT CONFIG_SPL_FSL_PBL CONFIG_SYS_FSL_DDR4 In this case we re-sync options that had been set in CONFIG_SYS_EXTRA_OPTIONS but should not have been as they have proper entries. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01mx28evk_auart_console: Remove CONFIG_SYS_EXTRA_OPTIONSTom Rini
This was only setting values not referenced in the code so remove it. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to KconfigTom Rini
This platform is the only one to set these options, so define them in the board Kconfig file. Cc: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFRTC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFRTC CONFIG_SYS_MCFRTC_BASE While at it, remove '#undef RTC_DEBUG' from these config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01stmark2: Remove CONFIG_SERIAL_FLASHTom Rini
This is not referenced anywhere, remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFTMR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFTMR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CF_DSPI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CF_DSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01atmel: Remove CONFIG_SPL_ATMEL_SIZETom Rini
This seems to be unused in the code, remove it. Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAMETom Rini
Both of these variables are used in a few hard-coded ways to set some string values or print something to the user. In almost all cases, it's just as useful to hard-code the value used. The exception here is printing something closer to correct board name for p1_p2_rdb machines. This can be done using something from the device tree, but for now hard-code a non-CONFIG based value instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BITBANGMII_MULTI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BITBANGMII_MULTI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BCM2835_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BCM2835_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Finish converting CONFIG_BOOTM_NETBSD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD CONFIG_BOOTM_RTEMS CONFIG_DESIGNWARE_WATCHDOG CONFIG_DISPLAY_CPUINFO CONFIG_DM_ETH CONFIG_DM_MMC CONFIG_DM_REGULATOR CONFIG_DM_SPI CONFIG_DM_SPI_FLASH CONFIG_ISO_PARTITION CONFIG_OF_SEPARATE CONFIG_SPI_FLASH_WINBOND CONFIG_SPL_ETH CONFIG_TIMER CONFIG_USB_DWC3 CONFIG_USB_DWC3_GADGET CONFIG_USB_DWC3_OMAP CONFIG_USB_DWC3_PHY_OMAP CONFIG_USB_EHCI_TEGRA CONFIG_USB_GADGET_DOWNLOAD CONFIG_USB_GADGET_DUALSPEED CONFIG_USB_GADGET_MANUFACTURER CONFIG_USB_GADGET_PRODUCT_NUM CONFIG_USB_GADGET_VBUS_DRAW CONFIG_USB_GADGET_VENDOR_NUM This catches a number of cases where board config files were #undef various CONFIG options when building SPL, and that doesn't work. Clean up the related comments as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01CI: Update unmigrated symbol checkTom Rini
We need to check for config header files that #undef migrated symbols as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01am33xx: musb: Remove unused configuration logicTom Rini
At this point DM and OF_CONTROL are used to configure how the USB ports are enabled, with the exception of in SPL and no SPL_OF_CONTROL. Remove a bunch of now unused logic to simplify the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-31Merge branch '2022-03-31-image-add-a-stage-pre-load' into nextTom Rini
To quote the author: This series adds a stage pre-load before launching an image. This stage is used to read a header before the image and this header contains the signature of the full image. So u-boot may check the full image before using any data of the image. The support of this header is added to binman, and a command verify checks the signature of a blob and set the u-boot env variable "loadaddr_verified" to the beginning of the "real" image. The support of this header is only added to binman, but it may also be added to mkimage.
2022-03-31cmd: bootm: add subcommand preloadPhilippe Reynes
Add a subcommand preload to bootm that execute the preload stage on the image. Right now, it checks the signature of the image with the pre-load header. If the check succeed, the u-boot env variable 'loadaddr_verified' is set to the address of the image (without the header). It allows to run such commands: tftp script.img && bootm preload $loadaddr && source $loadaddr_verified Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31test: py: vboot: add test for global image signaturePhilippe Reynes
Adds test units for the pre-load header signature. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31configs: sandbox_defconfig: enable stage pre-load in bootmPhilippe Reynes
Enable the support of stage pre-load in bootm. For the moment, this stage allow to verify the signature of the full image with a header. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31tools: binman: add support for pre-load headerPhilippe Reynes
Adds the support of the pre-load header with the image signature to binman. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31Makefile: provide sah-key to binmanPhilippe Reynes
Set the variable pre-load-key-path with the shell variable PRE_LOAD_KEY_PATH that contain the keys path (used for signature). This variable pre-load-key-path is provided to binman. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31mkimage: add public key for image pre-load stagePhilippe Reynes
This commit enhances mkimage to update the node /image/pre-load/sig with the public key. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31common: spl: fit_ram: allow to use image pre loadPhilippe Reynes
Add the support of image pre load in spl or tpl when loading an image from ram. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31cmd: bootm: add a stage pre-loadPhilippe Reynes
Add a stage pre-load to the command bootm. Right now, this stage may be used to read a header and check the signature of the full image. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31boot: image: add a stage pre-loadPhilippe Reynes
Add a stage pre-load that could check or modify an image. For the moment, only a header with a signature is supported. This header has the following format: - magic : 4 bytes - version : 4 bytes - header size : 4 bytes - image size : 4 bytes - offset image signature : 4 bytes - flags : 4 bytes - reserved0 : 4 bytes - reserved1 : 4 bytes - sha256 of the image signature : 32 bytes - signature of the first 64 bytes : n bytes - image signature : n bytes - padding : up to header size The stage uses a node /image/pre-load/sig to get some informations: - algo-name (mandatory) : name of the algo used to sign - padding-name : name of padding used to sign - signature-size : size of the signature (in the header) - mandatory : set to yes if this sig is mandatory - public-key (madatory) : value of the public key Before running the image, the stage pre-load checks the signature provided in the header. This is an initial support, later we could add the support of: - ciphering - uncompressing - ... Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31lib: rsa: allow rsa verify with pkey in SPLPhilippe Reynes
This commit adds the option SPL_RSA_VERIFY_WITH_PKEY. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31lib: crypto: allow to build crypyo in SPLPhilippe Reynes
This commit adds the options: - SPL_ASYMMETRIC_KEY_TYPE - SPL_ASYMMETRIC_PUBLIC_KEY_SUBTYPE - SPL_RSA_PUBLIC_KEY_PARSER Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31lib: allow to build asn1 decoder and oid registry in SPLPhilippe Reynes
This commit adds the options: - SPL_ASN1_DECODER - SPL_OID_REGISTRY Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31lib: Kconfig: enhance the help of OID_REGISTRYPhilippe Reynes
Enhance the help for the config OID_REGISTRY. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31lib: Kconfig: enhance help for ASN1Philippe Reynes
Enhance the help for configs ASN1_COMPILER and ASN1_decoder. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31arch: Kconfig: imply BINMAN for SANDBOXPhilippe Reynes
To be able to use the tool binman on sandbox, the config SANDBOX should imply BINMAN. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-30Merge tag 'clk-2022.04-next' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-clk into next Clock patches for u-boot/next This is mostly cleanups/consolidations. clk_free is made to return void, and the CCF wrappers present in almost every CCF clock are consolidated. I would particularly like to have the latter upstream, since there are at least two series adding support for new CCF drivers (imx8mq and imxrt1170) which can benefit from these commits. I had to fix up the last commit since I missed an include for at91. CI: https://source.denx.de/u-boot/custodians/u-boot-clk/-/pipelines/11521
2022-03-30clk: Use generic CCF ops where possibleSean Anderson
This converts most CCF drivers to use generic ops. imx6q is the only outlier, where we retain the existing functionality by moving the check to request(). Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220320203446.740178-2-seanga2@gmail.com [ fixed missing include for at91 ] Signed-off-by: Sean Anderson <seanga2@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-06 03:10:51 +0000