summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-27efi_loader: Disable devices before handing over controlIlias Apalodimas
U-Boot Driver Model is supposed to remove devices with either DM_REMOVE_ACTIVE_DMA or DM_REMOVE_OS_PREPARE flags set, before exiting. Our bootm command does that by explicitly calling calling "dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);" and we also disable any USB devices. The EFI equivalent is doing none of those at the moment. As a result probing an fTPM driver now renders it unusable in Linux. During our (*probe) callback we open a session with OP-TEE, which is supposed to close with our (*remove) callback. Since the (*remove) is never called, once we boot into Linux and try to probe the device again we are getting a busy error response. Moreover all uclass (*preremove) functions won't run. So let's fix this by mimicking what bootm does and disconnect devices when efi_exit_boot_services() is called. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27efi_loader: Sort header file orderingIlias Apalodimas
Order header files according to https://www.denx.de/wiki/U-Boot/CodingStyle Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27trace: conserve gd register on RISC-VHeinrich Schuchardt
An UEFI application may change the value of the register that gd lives in. But some of our functions like get_ticks() access this register. So we have to set the gd register to the U-Boot value when entering a trace point and set it back to the application value when exiting the trace point. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27rtc: provide an emulated RTCHeinrich Schuchardt
On a board without hardware clock this software real time clock can be used. The build time is used to initialize the RTC. So you will have to adjust the time either manually using the 'date' command or use the 'sntp' to update the RTC with the time from a network time server. See CONFIG_CMD_SNTP and CONFIG_BOOTP_NTPSERVER. The RTC time is advanced according to CPU ticks. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27Makefile: provide constant with seconds since epochHeinrich Schuchardt
Provide a constant U_BOOT_EPOCH with the number of seconds since 1970-01-01. This constant can be used to initialize a software real time clock until it is updated via the 'sntp' command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27test: log: test message continuationHeinrich Schuchardt
Provide a unit test checking that a continuation message will use the same log level and log category as the previous message. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27log: allow for message continuationHeinrich Schuchardt
Some drivers use macro pr_cont() for continuing a message sent via printk. Hence if we want to convert printk messaging to using the logging system, we must support continuation of log messages too. As pr_cont() does not provide a message level we need a means of remembering the last log level. With the patch a pseudo log level LOGL_CONT as well as a pseudo log category LOGC_CONT are introduced. Using these results in the application of the same log level and category as in the previous log message. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27log: move processing_msg to global dataHeinrich Schuchardt
Replace the static variable processing_msg by a field in the global data. Make the field bool at it can only be true or false. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27nokia_rx51: re-enable CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENVAnatolij Gustschin
With disabled legacy VIDEO option CONSOLE_MUX is not auto-selected any more, re-enable it. Fixes: 9dec5a0ea130 ("nokia_rx51: disable obsolete VIDEO config") Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2020-10-26Merge tag 'video-for-2021.01-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - disable CONFIG_VIDEO to remove DM conversion warnings for boards: at91sam9, eb_cpu5282, ls1021aqds, ls1021atwr, mx23evk, mx6sxsabresd, mx7dsabresd, nokia_rx51, picosam9g45, sansa_fuze_plus, xfi3
2020-10-26nokia_rx51: disable obsolete VIDEO configAnatolij Gustschin
Disable VIDEO config to fix DM_VIDEO conversion deadline warning. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26eb_cpu5282: fix CONFIG_DM_VIDEO build warningsAnatolij Gustschin
Remove CONFIG_VIDEO dependency to fix board removal warnings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-26sansa_fuze_plus: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com>
2020-10-26xfi3: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com>
2020-10-26mx23evk: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
2020-10-26at91sam9n12ek: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Boards should convert to DM_VIDEO if they need video console support. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com>
2020-10-26at91sam9: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26picosam9g45: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Erik van Luijk <evanluijk@interact.nl>
2020-10-26ls1021atwr: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26ls1021aqds: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Alison Wang <alison.wang@nxp.com>
2020-10-26imx: mx7dsabresd: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26imx: mx6sxsabresd: disable obsolete VIDEO configAnatolij Gustschin
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- No need to check before free in kendryte clk. - Only enable OF_BOARD_FIXUP if U-Boot is configured for S-Mode. - Reduce k210 dts DMA block size - Move timers into drivers/timer - Correct fu540 dts reg size of clint node
2020-10-26riscv: fu540: dts: Correct reg size of clint nodePragnesh Patel
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26riscv: Move timer portions of SiFive CLINT to drivers/timerSean Anderson
Half of this driver is a DM-based timer driver, and half is RISC-V-specific IPI code. Move the timer portions in with the other timer drivers. The KConfig is not moved, since it also enables IPIs. It could also be split into two configs, but no boards use the timer but not the IPI atm, so I haven't split it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26timer: Add _TIMER suffix to Andes PLMT KconfigSean Anderson
This matches the naming scheme of other timer drivers. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26riscv: Move Andes PLMT driver to drivers/timerSean Anderson
This is a regular timer driver, and should live with the other timer drivers. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26riscv: k210: Reduce DMA block sizeSean Anderson
Although the max DMA size supported by the hardware register is 22 bits (or 4M), the Linux driver for this device only supports transfers of up to 2M. On a device with 8M total memory, I don't think it will make too much of a difference. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26riscv: Only enable OF_BOARD_FIXUP for S-ModeSean Anderson
It is unsafe to enable OF_BOARD_FIXUP only based on OF_SEPARATE. OF_SEPARATE may indicate that the user wishes U-Boot to use a different device tree than one obtained via OF_PRIOR_STAGE. However, OF_SEPARATE may also indicate that the device tree which would be obtained via OF_PRIOR_STAGE is invalid, nonexistant, or otherwise unusable. In this latter case, enabling OF_BOARD_FIXUP will result in corruption of the device tree. To remedy this, only enable OF_BOARD_FIXUP if U-Boot is configured for S-Mode. Fixes: 1c17e55594a394ced7de88d91be294eaf8c564c1 Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-10-26clk: kendryte: no need to check argument of free()Heinrich Schuchardt
free() checks if its argument is NULL. No need to check it twice. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-10-24Merge branch '2020-10-23-misc-changes'Tom Rini
Highlights: - Fix a problem with the bootm overlap tests - Remove duplicated code in fatwrite - Cleanup our current "misc" command code and add a new one for misc class devices. - Various GPIO fixes
2020-10-23power: regulator: add dummy helperPeng Fan
Add dummy helper to enabling the header could be included when DM REGULATOR not enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-10-23phy: nop-phy: add clk bulkPeng Fan
Add clk bulk for nop-phy driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-10-23bootm: fix wrong conditions about images overlapJaehoon Chung
It doesn't need to consider start byte address. If ramdisk size is 0x800000 and start address is 0x2700000, then it's used until 0x02efffff, not 0x02f00000. But it's detected to overlapt RD image, when kernel start address is 0x02f00000. Because it's doing wrong calculation about rd_len. This patch fixed wrong calculation address position when check condition. In addition, it needs to check one more condition about overlapping entire area. Fixes: commit fbde7589ce30 ("common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-10-23cmd: fat: Use do_save() for fatwriteLad Prabhakar
do_save() function defined in fs.c also supports FAT file system re-use the same for fatwrite command. Also fix the FAT test script to match the expected output. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-10-23test: unit tests for print_freq(), print_size()Heinrich Schuchardt
Provide unit tests for functions print_freq() and print_size(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-23cmd: Add a 'misc' command to access miscellaneous devicesBin Meng
Enable the command "misc" for accessing miscellaneous devices with a MISC uclass driver. The command provides listing all MISC devices as well as read and write functionalities via their drivers. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23cmd: Split out timer command from the sleep commandBin Meng
CONFIG_CMD_TIMER merits a single file instead of co-exist in the sleep command file. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23cmd: Rename CMD_MISC to CMD_SLEEPBin Meng
The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23Makefile: Fix u-boot-nodtb.bin targetPali Rohár
This change fixes two issues when building u-boot-nodtb.bin target: * Remove intermediate binary u-boot-nodtb.bin from disk when static_rela call (which modifies u-boot-nodtb.bin binary) failed. It is required because previous objcopy call creates binary and static_rela finish it. * Do not call static_rela cmd when u-boot-nodtb.bin binary was not created/updated by previous objcopy call. Second fix would ensure that u-boot-nodtb.bin binary is not updated when all prerequisites were up-to-date. And therefore final binary u-boot.bin is not updated in case all prerequisites were not modified and were up-to-date. Now running 'make SOURCE_DATE_EPOCH=0 u-boot.bin' second time now does not touch u-boot.bin binary in case nothing was modified, so GNU make can correctly detect that everything is up-to-date. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-23i2c: i2c-gpio: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-10-23power: regulator: gpio-regulator: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-23power: regulator: gpio-regulator: protect count valuePatrick Delaunay
Update the size of states_array to avoid overflow for dev_pdata->voltages[j] and dev_pdata->states[j]. As the size of array is GPIO_REGULATOR_MAX_STATES, the size of states_array is limited by GPIO_REGULATOR_MAX_STATES * 2 = 4 instead of 8 previously. The value of the "count" variable is limited by the third parameter of fdtdec_get_int_array_count. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-23post: remove redundant conditionHeinrich Schuchardt
(A && A == 0x20) is only true for (A == 0x20). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-23Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
2020-10-23Merge branch '2020-10-23-revert-xen-changes'Tom Rini
I had inadvertently merged the Xen series before everything was fully happy with the board maintainer. Revert the series.
2020-10-23Revert "serial: serial_xen: print U-Boot banner and others"Tom Rini
This reverts commit 18426bf02217de2e9bb2b41eaa74d769892c55ef. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-23Revert "arch: arm/xen: add putc() for debugging"Tom Rini
This reverts commit 3a51b2a2c3cedc0d2a9ce981b8e00ab8cefcb6b7. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-23Revert "xen: add definitions for console_io"Tom Rini
This reverts commit 16389a74c516470c8f0fd8c712e1638f80384b92. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-23Revert "serial: serial_xen: add DEBUG_UART support"Tom Rini
This reverts commit 82e21b391bd315f6fe0e0b79326af8a141e9cca7. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 03:50:45 +0000