summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-17x86: apl: Hide the p2sb on exit from U-BootSimon Glass
This confuses Linux's PCI probing so needs to be hidden when booting Linux. Add a remove() method to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: apl: Support set_hide() in p2sb driverSimon Glass
Add support for this new method in the driver and in the fsp-s setup. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17p2sb: Add a method to hide the busSimon Glass
The P2SB bus needs to be hidden in some cases so that it does not get auto-configured by Linux. Add a method for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17i2c: designware_i2c: Support ACPI table generationSimon Glass
Update the PCI driver to generate ACPI information so that Linux has the full information about each I2C bus. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> [bmeng: Correct one typo in dw_i2c_gen_speed_config() comments] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17i2c: Add log_ret() on errorSimon Glass
Add a few of these calls to make it easier to see where an error occurs, if CONFIG_LOG_ERROR_RETURN is enabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-17i2c: designware_i2c: Add a little more debuggingSimon Glass
Add debugging for a few more values and also use log to show return values when something goes wrong. This makes it easier to see the root cause. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-17x86: gpio: Add support for obtaining ACPI info for a GPIOSimon Glass
Implement the method that converts a GPIO into the form used by ACPI, so that GPIOs can be added to ACPI tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: apl: Use memory-mapped access for VBTSimon Glass
Use the new binman memory-mapping function to access the VBT, to simplify the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: Add error checking for csrt table generationSimon Glass
Generation of this table can fail, so update the function to return an error code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: pinctrl: Drop the acpi_path memberSimon Glass
This is in the device tree now, so drop the unnecessary field here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: pinctrl: Set up itss in the probe() methodSimon Glass
At present the itss is probed in the ofdata_to_platdata() method. This is incorrect since itss is a child of p2sb which itself needs to probe the pinctrl device. This means that p2sb is effectively not probed when the itss is probed, so we get the wrong register address from p2sb. Fix this by moving the itss probe to the correct place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: pinctrl: Add multi-ACPI controlSimon Glass
Add a Kconfig to control whether pinctrl is represented as a single ACPI device or as multiple devices. In the latter case (the default) we should return the pin number relative to the pinctrl device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: pinctrl: Update comment for intel_pinctrl_get_pad()Simon Glass
Add information about what is returned on error. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: pinctrl: Add a way to get the pinctrl reg addressSimon Glass
At present we can query the offset of a pinctrl register within the p2sb. For ACPI we need to get the actual address of the register. Add a function to handle this and rename the old one to more accurately reflect its purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17sound: Add an ACPI driver for Maxim MAX98357acSimon Glass
This chip is used on coral and we need to generate ACPI tables for sound to make it work. Add a driver that does just this (i.e. at present does not actually support playing sound). Signed-off-by: Simon Glass <sjg@chromium.org> [bmeng: Use the correct acpi_irq_polarity enum number] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17sound: Add an ACPI driver for Dialog Semicondutor da7219Simon Glass
This chip is used on coral and we need to generate ACPI tables for sound to make it work. Add a driver that does just this (i.e. at present does not actually support playing sound). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17x86: Add support for building up an NHLT structureSimon Glass
The Intel Non-High-Definition-Audio Link Table (NHLT) table describes the audio codecs and connections in a system. Various devices can contribute information to produce the table. Add functions to allow adding to the structure that is eventually written to the ACPI tables. Also add the device-tree bindings. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17acpi: Support writing named valuesSimon Glass
Allow writing named integers and strings to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> [bmeng: Fix the "new blank line at EOF" warning] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of a deviceSimon Glass
Allow writing an ACPI device to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> [bmeng: Fix build failures on Sandbox] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: Add bindings for NHLTSimon Glass
Add devicetree bindings for the Intel Non-High-Definition-Audio Link Table (NHLT). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: mmc: Generate ACPI info for the PCI SD CardSimon Glass
Write required information into the SSDT to describe the SD card card-detect pin. Since the required GPIO properties are not present in the device-tree binding, set them manually for now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of a generic registerSimon Glass
Allow writing out a generic register. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> [bmeng: Fix build failures on Sandbox] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of a scopeSimon Glass
Add a function to write a scope to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: Fix build failures on Sandbox] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Export functions to write sized valuesSimon Glass
At present only acpigen_write_integer() is exported for use by other code. But in some cases it is useful to call the specific function depending on the size of the value. Export these functions and add a test. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: Fix the "new blank line at EOF" warning] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17dm: acpi: Add support for the NHLT tableSimon Glass
The Intel Non-High-Definition-Audio Link Table (NHLT) table describes the audio codecs and connections in a system. Various devices can contribute information to produce the table. Add core support for this, based on a structure which is built up through calls to the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17dm: core: Add a way of overriding the ACPI device pathSimon Glass
Some devices such as GPIO need to override the normal path that would be generated by driver model. Add a device-tree property for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17dtoc: Support ACPI paths in of-platdataSimon Glass
The start of an ACPI path typically has backslashes in it. These are not preserved during the translation from device tree to C code, since dtc (correctly) uses the first backslash as an escape character, and dtoc therefore leaves it out of the C string. Fix this with special-case handling. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17acpi: Allow creating the GNVS to failSimon Glass
In some cases an internal error may prevent this from working. Update the function return value and report the error. At present the API for writing tables does not easily support reporting errors, but once it is fully updated to use a context pointer, this will be easier. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17binman: Add way to locate an entry in memorySimon Glass
Add support for accessing an entry's contents in memory-mapped SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17binman: Refactor binman_entry_find() to allow other nodesSimon Glass
At present we can only read from a top-level binman node entry. Refactor this function to produce a second local function which supports reading from any node. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17binman: Allow setting the ROM offsetSimon Glass
On x86 the SPI ROM can be memory-mapped, at least most of it. Add a way to tell binman the offset from a ROM address to a RAM address. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add an acpi command to list/dump generated ACPI itemsSimon Glass
Add a command that shows the individual blocks of data generated by each device, effectively splitting the full table into its component parts. This can be helpful for debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17dm: acpi: Enhance acpi_get_name()Simon Glass
For many device types it is possible to figure out the name just by looking at its uclass or parent. Add a function to handle this, since it allows us to cover the vast majority of cases automatically. However it is sometimes impossible to figure out an ACPI name for a device just by looking at its uclass. For example a touch device may have a vendor-specific name. Add a new "acpi,name" property to allow a custom name to be created. With this new feature we can drop the get_name() methods in the sandbox I2C and SPI drivers. They were only added for testing purposes. Update the tests to use the new values. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17pci: Avoid a crash in device_is_on_pci_bus()Simon Glass
This function cannot currently be called on the root node. Add a check for this as well as a test. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: Allow devices to write to DSDTSimon Glass
Call the new core function to inject ASL programmatically into the DSDT. This is made up of fragments generated by devices that have the inject_dsdt() method. The normal, compiled ASL file is added after this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for DSDT generationSimon Glass
Some devices need to inject extra code into the Differentiated System Descriptor Table (DSDT). Add a method to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in inject_dsdt() comments] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: Allow devices to write an SSDTSimon Glass
Call the new core function to write the SSDT. This is made up of fragments generated by devices that have the fill_ssdt() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support ordering SSDT data by deviceSimon Glass
Add a /chosen property to control the order in which the data appears in the SSDT. This allows matching up U-Boot's output from a dump of the known-good data obtained from within Linux. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Record the items added to SSDTSimon Glass
It is useful to be able to control the order of data written to the SSDT so that we can compare the output against known-good kernel dumps. Add code to record each item that is added along with the device that added it. That allows us to reorder things later if needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: acpi: Move MADT down a bitSimon Glass
Put this table before MCFG so that it matches the order that coreboot uses when passing tables to Linux. This is a cosmetic change since the order of the tables does not otherwise matter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for SSDT generationSimon Glass
Some devices need to generate code for the Secondary System Descriptor Table (SSDT). Add a method to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for a generic power sequenceSimon Glass
Add a way for devices to enable and disable themselves using ACPI code that updates GPIOs. This takes several timing parameters and supports enable, reset and stop. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for writing a GPIO power sequenceSimon Glass
Power to some devices is controlled by GPIOs. Add a way to generate ACPI code to enable and disable a GPIO so that this can be handled within an ACPI method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for writing a Power ResourceSimon Glass
These are used in ACPI to disable power to various pats of the system when in sleep. Add a way to create a power resource, with the caller finishing off the details. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for various misc ACPI opcodesSimon Glass
Add more functions to handle some miscellaneous ACPI opcodes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support copying properties from device tree to ACPISimon Glass
Some drivers in Linux support both device tree and ACPI. U-Boot itself uses Linux device-tree bindings for its own configuration but does not use ACPI. It is convenient to copy these values over to the ACPI DP table for passing to linux. Add some convenience functions to help with this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a GPIOSimon Glass
Allowing writing out a reference to a GPIO within the ACPI output. This can be used by ACPI code to access a GPIO at runtime. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing Device Properties objects via _DSDSimon Glass
More complex device properties can be provided to drivers via a device-specific data (_DSD) object. To create this we need to build it up in a separate data structure and then generate the ACPI code, due to its recursive nature. Add an implementation of this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a UUIDSimon Glass
ACPI supports writing a UUID in a special format. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a nameSimon Glass
ACPI supports storing names which are made up of multiple path components. Several special cases are supported. Add a function to emit a name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-13 10:57:24 +0000