summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-16disk: efi: avoid unaligned pointer errorHeinrich Schuchardt
When building with GCC 9.1 an error occurs: disk/part_efi.c: In function ‘gpt_verify_partitions’: disk/part_efi.c:737:49: error: taking address of packed member of ‘struct _gpt_entry’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 737 | gpt_convert_efi_name_to_char(efi_str, gpt_e[i].partition_name, | ~~~~~~~~^~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[1]: *** [scripts/Makefile.build:279: disk/part_efi.o] Error 1 make: *** [Makefile:1594: disk] Error 2 Adjust gpt_convert_efi_name_to_char() to accept unaligned strings. Reported-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: add more sources to Sphinx documentationHeinrich Schuchardt
Add more C files as sources to the Sphinx generated documentaton (make htmldocs). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: function comments cmd/efi_debug.cHeinrich Schuchardt
Adjust comments for Sphinx. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: function comments efi_bootmgr.cHeinrich Schuchardt
Convert function descriptions to Sphinx style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix function comments in cmd/bootefi.cHeinrich Schuchardt
Describe efi_set_bootdev(). Change function descriptions to Sphinx style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix comment for struct efi_pool_allocationHeinrich Schuchardt
Change comment for struct efi_pool_allocation to match Sphinx style. Describe all structure fields. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix comments for variable servicesHeinrich Schuchardt
Add missing parameter descriptions. Remove an invalid link. Correct the formatting of a function comment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_driver: use Sphinx style commentsHeinrich Schuchardt
Use Sphinx style comments for describing function parameters. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix comments for efi_update_exit_data()Heinrich Schuchardt
Add missing colons after parameter descriptions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix function comments in efi_boottime.cHeinrich Schuchardt
scripts/kernel-doc pointed out some errors in the function comments in efi_boottime.c. Add missing and remove superfluous parameter descriptions. Escape * in a function description. Add empty lines for readability. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: Change return type of efi_add_memory_map()Bryan O'Donoghue
We currently have some inconsistent use of efi_add_memory_map() throughout the code. In particular the return value of efi_add_memory_map() is not interpreted the same way by various users in the codebase. This patch does the following: - Changes efi_add_memory_map() to return efi_status_t. - Adds a method description to efi_add_memory_map(). - Changes efi_add_memory_map() to return EFI_SUCCESS - Returns non-zero for error in efi_add_memory_map() - Updates efi_allocate_pages() to new efi_add_memory_map() - Updates efi_free_pages() to new efi_add_memory_map() - Updates efi_carve_out_dt_rsv() to new efi_add_memory_map() - Updates efi_add_runtime_mmio() to new efi_add_memory_map() Fixes: 5d00995c361c ("efi_loader: Implement memory allocation and map") Fixes: 74c16acce30b ("efi_loader: Don't allocate from memory holes") Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Alexander Graf <agraf@csgraf.de> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_selftest: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGEHeinrich Schuchardt
Provide a unit test for SetVirtualAddressMap() and ConvertPointer(). As ConvertPointer() is not implemented yet this will spit out some warnings. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGEHeinrich Schuchardt
Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. This requires allocating the event and the event list from runtime data. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: efi_set_virtual_address_map_runtime()Heinrich Schuchardt
efi_set_virtual_address_map_runtime() must be of type __efi_runtime. Fixes: ee8ebaaaaedc ("efi_loader: split off detaching SetVirtualAddress()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_selftest: do not call CloseEvent() after ExitBootServices()Heinrich Schuchardt
Boot services are not available after calling ExitBootServices(). So we should not try to close an event here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-16efi_loader: use predefined constants in crt0_*_efi.SHeinrich Schuchardt
We should use predefined constants instead of magic numbers. Move some constant definitions from include/pe.h to include/asm-generic/pe.h. Use these constants in crt0_*_efi.S. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: duplicate IMAGE_SUBSYSTEM_EFI_APPLICATIONHeinrich Schuchardt
IMAGE_SUBSYSTEM_EFI_APPLICATION is already defined in include/asm-generic/pe.h which is included in include/pe.h. We should not define it twice. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-15Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2019-07-15net: macb: Add support for 1000-baseXRadu Pirea
Macb can be used with Xilinx PCS/PMA PHY in fpga which is a 1000-baseX phy(lpa 0x41e0). This patch adds checks for LPA_1000XFULL and LPA_1000XHALF bits. Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: macb: Fixed reading MII_LPA registerRadu Pirea
If macb is gem and is gigabit capable, lpa value is not read from the right register(MII_LPA) and is read from MII_STAT1000. This patch fixes reading of the lpa value. Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15configs: am65x_evm_a53: enable networkingGrygorii Strashko
Enable TI K3 AM65x CPSW NUSS driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-15arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defsGrygorii Strashko
Add mcu cpsw nuss pinmux and phy defs required by cpsw. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15arm64: dts: ti: k3-am65: add mcu cpsw nodeGrygorii Strashko
Add mcu cpsw and its components along with scm_conf node to have ethernet functional. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driverKeerthy
Add new driver for the TI AM65x SoC Gigabit Ethernet Switch subsystem (CPSW NUSS). It has two ports and provides Ethernet packet communication for the device and can be configured as an Ethernet switch. CPSW NUSS features: the Reduced Gigabit Media Independent Interface (RGMII), Reduced Media Independent Interface (RMII), and the Management Data Input/Output (MDIO) interface for physical layer device (PHY) management. The TI AM65x SoC has integrated two-port Gigabit Ethernet Switch subsystem into device MCU domain named MCU_CPSW0. One Ethernet port (port 1) with selectable RGMII and RMII interfaces and an internal Communications Port Programming Interface (CPPI) port (Host port 0). Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels and on RX channels operating by TI am654 NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addrKeerthy
Use phys_addr_t for mdio_base address to avoid build warnings on arm64 and dra7. Cast it to uintprt_t before assigning to regs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: phy: cortina: Use block layer to read from mmcYinbo Zhu
This patch is to use block layer to read from mmc in cortina Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: mscc: refactor mscc_miimHoratiu Vultur
Because all MSCC SoC use the same MDIO bus, put the implementation in one common file(mscc_miim) and make all the other MSCC network drivers to use these functions. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15test: dm: add MDIO testAlex Marginean
A very simple test for DM_MDIO, mimicks a register write/read through the sandbox bus to a dummy PHY. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: introduce MDIO DM class for MDIO devicesAlex Marginean
Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as stand-alone devices. Useful in particular for systems that support DM_ETH and have a stand-alone MDIO hardware block shared by multiple Ethernet interfaces. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: mscc: serval: Remove delay when serdes is configuredHoratiu Vultur
When serdes configuration was written in hardware there was a delay of 100ms to be sure that configuration was written. But the delay is not needed because already the function serdes_write it is checking that the operation finished. Therefore remove the mdelay. This improves the speed of configuring the network driver. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: phy: ti: Fix clock output DT propertyTrent Piepho
The code block reading the DT property for the clock output control was before the phy's DT node pointer was set, so it could never work. Move it after the node pointer is set. Also store the unsigned 32-bit property into an unsigned value, not a signed value, as the former will cause a problem if value overflows. For instance, if one were to add 0xffffffff as a code to mean the clock output should be turned off. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Janine Hagemann <j.hagemann@phytec.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: phy: ti: Use default values for tx/rx delay and fifo sizeTrent Piepho
When not using DM_ETH, these PHY settings are programmed with default values hardcoded into the driver. When using DM_ETH, they should come from the device tree. However, if the device tree does not have the properties, the driver will silent use -1. Which is entirely out of range, programs nonsense into the PHY's registers, and does not work. Change this to use the same defaults as non-DM_ETH if the device tree is lacking the properties. As an alternative, the kernel driver for the phy will display an error message and fail if the device tree is lacking. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Janine Hagemann <j.hagemann@phytec.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15cmd: mii: Add the standard 1000BASE-T registersTrent Piepho
These are standard across gigabit phys. These mostly extend the auto-negotiation information with gigabit fields. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15cmd: mii: Refactor some of the MII reg dump codeTrent Piepho
Share the code that prints out a register field with the function that prints out the "special" fields. There were two arrays the register dump list, one with reg number and name, another with a pointer to the field table and the table size. These two arrays had have each entry match what register is referred to. Combine them into just one table. Now they can't not match and there is just one table. Add some missing consts to pointers to string literals. The dump code was ignoring the regno field in the description table and assuming register 0 was at index 0, etc. Have it use the field. Change reg > max+1 into reg >= max, which doesn't fail if max+1 could overflow, besides just making more sense. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15Merge tag 'mmc-2019-7-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- mmc spi driver model support - drop mmc_spi command - enhanced Strobe mmc HS400 support - minor mmc bug/fixes and optimization - omap hsmmc and mvbeu update - sdhci card detect support
2019-07-15mmc: fsl_esdhc_imx: enlarge mmc timeoutPeng Fan
Flash system partition with fastboot will earse the partition firstly The 600ms timeout will fail on some SD Card. Enlarge it to 5s to make it works for most of sdcard Cc: guoyin.chen <guoyin.chen@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15mmc: fsl_esdhc_imx: add i.MX8QM compatiblePeng Fan
Add i.MX8QM compatible and soc data, the soc data is following Linux i.MX SDHC driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15mmc: fsl_esdhc_imx: add HS400 Enhanced strobe supportPeng Fan
Implement set_enhanced_strobe hook for fsl_esdhc_imx, ,in esdhc_set_timing and esdhc_change_pinstate, also handle HS400_ES. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15mmc: fsl_esdhc_imx: use mmc_of_parse to set host_capsPeng Fan
Use mmc_of_parse to set host_caps. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15mmc: Parse no-1-8-v DT propertyPeng Fan
Parse no-1-8-v DT Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-07-15mmc: Parse HS400 Enhanced strobe DT propertiesPeng Fan
Add HS400 Enhanced strobe properties parsing support to mmc_of_parse(). Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-07-15mmc: support hs400 enhanced strobe modePeng Fan
eMMC 5.1+ supports HS400 Enhances Strobe mode without the need for tuning procedure. The flow is as following: - set HS_TIMIMG (Highspeed) - Host change freq to <= 52Mhz - set the bus width to Enhanced strobe and DDR8Bit(CMD6), EXT_CSD[183] = 0x86 instead of 0x80 - set HS_TIMING to 0x3 (HS400) - Host change freq to <= 200Mhz - Host select HS400 enhanced strobe complete Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15mmc: fsl_esdhc_imx: fix config check issue when building in SPLYe Li
Should use CONFIG_IS_ENABLED not IS_ENABLED for clock and regulator drivers, CONFIG_IS_ENABLED will check the CONFIG_SPL_CLK and CONFIG_SPL_DM_REGULATOR when building SPL. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15cmd: Remove mmc_spi commandAnup Patel
The mmc_spi command was added to manually setup MMC over SPI bus using command. This was required by the legacy non-DM MMC_SPI driver. With DM based MMC_SPI driver in-place, we can now use all general storge commands and mmc command for MMC over SPI bus hence we remove the mmc_spi command all it's references. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15mmc: mmc_spi: Re-write driver using DM frameworkBhargav Shah
This patch rewrites MMC SPI driver using U-Boot DM framework and get it's working on SiFive Unleashed board. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15mmc: skip select_mode_and_width for MMC SPI hostAnup Patel
The MMC mode and width are fixed for MMC SPI host hence we skip sd_select_mode_and_width() and mmc_select_mode_and_width() for MMC SPI host. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15mmc: retry a few times if a partition switch failedJean-Jacques Hiblot
This operation may fail. Retry it a few times before giving up and report a failure. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15mmc: do not change mode when accessing a boot partitionJean-Jacques Hiblot
Accessing the boot partition had been error prone with HS200 and HS400 and was disabled. The driver first switched to a lesser mode and then switched the partition access. It was mostly due to a bad handling of the switch and has been fixed, so let's remove this 'feature' Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15mmc: During a switch, poll on dat0 if available and check the final statusJean-Jacques Hiblot
The switch operation can sometimes make the bus unreliable, in that case the send_status parameter should be false to indicate not to poll using CMD13. If polling on dat0 is possible, we should use it to detect the end of the operation. At the end of the operation it is safe to use CMD13 to get the status of the card. It is important to do so because the operation may have failed. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15mmc: When switching partition, use the timeout specified in the ext_csdJean-Jacques Hiblot
The e-MMC spec allows the e-MMC to specify a timeout for the partition switch command. It can take up to 2550 ms. There is no lower limit to this value in the spec, but do as the the linux driver does and force it to be at least 300ms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-02 11:01:25 +0000