summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-06Merge tag 'efi-2021-01-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc1 The following bugs in the UEFI system are resolved: * illegal free in EFI_LOAD_FILE2_PROTOCOL implementation * incorrect documentation of EFI_LOAD_FILE2_PROTOCOL implementation * output of CRC32 as decimal instead hexadecimal in unit test * use EfiReservedMemoryType for no-map reserved memory * avoid unnecessary resets in UEFI unit tests * call EFI bootmgr even without having /EFI/boot
2020-10-06Merge tag 'u-boot-amlogic-20201005' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - generate unique mac address from SoC serial on S400 board - Add USB support for GXL and AXG SoCs - Update Gadget code to use the new GXL and AXG USB glue driver - Add a VIM3 board support to add dynamic PCIe enable in OS DT - Fix AXG pinmux with requesting GPIOs - Add missing GPIOA_18 for AXG pinctrl - Add Amlogic PWM driver
2020-10-06efi_loader: consider no-map property of reserved memoryHeinrich Schuchardt
The device tree may contain a /reserved-memory node. The no-map property of the sub-nodes signals if the memory may be accessed by the UEFI payload or not. In the EBBR specification (https://github.com/arm-software/ebbr) the modeling of the reserved memory has been clarified. If a reserved memory node in the device tree has the no-map property map, create a EfiReservedMemoryType memory map entry else use EfiBootServicesData. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=nHeinrich Schuchardt
CONFIG_EFI_GRUB_ARM32 is only needed for architectures with caches that are not managed via CP15 (or for some outdated buggy versions of GRUB). It makes more sense to disable the setting per architecture than per defconfig. Move QEMU's CONFIG_EFI_GRUB_ARM32_WORKAROUND=n from defconfig to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06efi: Fix typo in documentationSean Anderson
There is an extra space. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06distro_bootcmd: call EFI bootmgr even without having /EFI/bootMichael Walle
Currently, the EFI bootmgr is only called if there is a EFI binary inside the path for removable media is found, i.e. /EFI/boot/. This doesn't make sense. It is the duty of the bootmgr to find out the path and name of the EFI binary to boot. It should be called even if there is no /EFI/boot directory. Thus, call the bootmgr before we try to boot the EFI binary inside the removable media path. Also remove the ${fdtcontroladdr} parameter because the fallback is handled in cmd/bootefi.c and that already takes care of correct settings if the board has ACPI and thus no device tree at all. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06efi_selftest: avoid unnecessary resetHeinrich Schuchardt
When we do not execute a test requiring ExitBootServices do not reset the system after testing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06efi_selftest: print CRC32 of initrd as hexadecimalHeinrich Schuchardt
Print the CRC32 loaded via the EFI_LOAD_FILE2_PROTOCOL as a hexadecimal number. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-10-06efi_selftest: enable printing hexadecimal numbersHeinrich Schuchardt
Add code to use %x in efi_st_print(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06efi_loader: illegal free in EFI_LOAD_FILE2_PROTOCOLHeinrich Schuchardt
strsep() changes the address that its first argument points to. We cannot use the changed address as argument of free(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-10-06efi_loader: description EFI_LOAD_FILE2_PROTOCOLHeinrich Schuchardt
U-Boot offers a EFI_LOAD_FILE2_PROTOCOL which the Linux EFI stub can use to load an initial RAM disk. Update the function comments of the implementation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-10-05configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05Merge branch 'next'Tom Rini
Bring in the assorted changes that have been staged in the 'next' branch prior to release. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05pwm: Add driver for Amlogic Meson PWM controllerNeil Armstrong
This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05pinctrl: meson-axg: add missing GPIOA_18Neil Armstrong
Add the missing GPIOA_18 from the missing EE gpio list. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05pinctrl: meson-axg-pmx: fix gpio requestNeil Armstrong
The AXG pmx driver gpio request offset needs the pin base to have the correct pin number. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2020-10-05board: amlogic: vim3: add support for dynamic PCIe enableNeil Armstrong
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. This adds this dynamic switching right before booting Linux and the configuration steps in the boards documentation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed warning by replacing min() by min_t()]
2020-10-05configs: vim3: use the vim3 board supportNeil Armstrong
Use the newly added VIM3 board support instead of the generic W400. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05board: amlogic: add a vim3 specific board supportNeil Armstrong
The VIM3 will need a specific code to enable PCIe if enabled in the MCU, thus add a specific board support for VIM3 & VIM3L. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1Neil Armstrong
This imports the G12A & SM1 SoC and boards DT changes from the Linux commit 9123e3a74ec7 ("Linux 5.9-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05configs: s400: enable USBNeil Armstrong
Enable USB Host & Gadget on the Amlogic S400 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05ARM: dts: meson-axg: add USB nodes for S400Neil Armstrong
Add the correcly architectured USB Glue node for Meson AXG and the S400 board in -u-boot.dtsi until support in upstream Linux then backported. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05arm: meson-axg: add board_usb_init()/cleanup() for USB gadgetNeil Armstrong
Add the board_usb_init()/cleanup() for USB gadget for AXG based on the code for the G12A architecture. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05phy: meson-gxl-usb: depend on Meson AXG aswellNeil Armstrong
Enable build of meson-gxl-usb PHY for the AXG architecture aswell. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05phy: meson-gxl: remove invalid USB3 PHY driverNeil Armstrong
The registers which are managed by the meson-gxl-usb3 PHY driver are actually "USB control" registers (which are "glue" registers which manage OTG detection and routing of the OTG capable port between the DWC2 peripheral-only controller and the DWC3 host-only controller). Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-gxl-usb driver supports the USB control registers on GXL and GXM SoCs (these were previously managed by the meson-gxl-usb3 PHY driver). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05ARM: mach-meson: use new DWC3 glue for GXL & GXMNeil Armstrong
Use the new Amlogic GXL/GXM USB Glue instead of the set of USB3 PHY and Simple DWC3 wrapper. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05usb: dwc3: add Amlogic GXL & GXL DWC3 GlueNeil Armstrong
The USB support was initialy done with a set of PHYs and dwc3-of-simple because the architecture of the USB complex was not understood correctly at the time (and proper documentation was missing...). But with the G12A family, the USB complex was correctly understood and implemented correctly. This adds a proper driver for the glue, based on the G12A one, but with enough changes to require a different driver in U-Boot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1Neil Armstrong
This imports the AXG, GXL & GXM SoC and boards DT changes from the Linux commit b3a9e3b9622a ("Linux 5.8-rc1"). This change also removes GXL & GXM u-boot.dtsi hacks for USB gadget. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05board: s400: generate unique mac address from SoC serialNeil Armstrong
Enable unique mac address generation from SoC serial on S400 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05Prepare v2020.10Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05Merge tag 'u-boot-atmel-2021.01-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for 2021.01 cycle: This feature set includes a new CPU driver for at91 family, new driver for PIT64B hardware timer, support for new at91 family SoC named sama7g5 which adds: clock support, including conversion of the clock tree to CCF; SoC support in mach-at91, pinctrl and mmc drivers update. The feature set also includes updates for mmc driver and some other minor fixes and features regarding building without the old Atmel PIT and the possibility to read a secondary MAC address from a second i2c EEPROM.
2020-10-05Merge tag 'u-boot-stm32-20201003' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm into next - stm32mp: DT alignment with Linux 5.9-rc4 - stm32mp: convert drivers to APIs which support live DT - stm32mp: gpio: minor fixes
2020-10-05cpu: at91: add driver for CPUClaudiu Beznea
Add basic CPU driver use to retrieve information about CPU itself. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-02Merge branch 'rpi-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi into next
2020-10-02pinctrl: bcm283x: Store the return value of dev_read_u32_default to intOvidiu Panait
Currently, the return value of dev_read_u32_default is stored in an u32, causing the subsequent "if (function < 0)" to always be false: u32 function; ... function = dev_read_u32_default(config, "brcm,function", -1); if (function < 0) { debug("Failed reading function for pinconfig %s (%d)\n", config->name, function); return -EINVAL; } Make "function" variable an int to fix this. Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-10-02pinctrl: bcm283x: Read address from DT in ofdata_to_platdataOvidiu Panait
Factor out reading IP base address to ofdata_to_platdata function, which is designed for this purpose. Also, drop the dev->priv NULL check, since this is already done by the dm core when allocating space using priv_auto_alloc_size feature. (in drivers/core/device.c -> device_ofdata_to_platdata). Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-10-02pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL checkOvidiu Panait
Remove CONFIG_IS_ENABLED(OF_CONTROL) check from DM_FLAG_PRE_RELOC, since this driver only supports OF_CONTROL. drivers/pinctrl/broadcom/Kconfig: config PINCTRL_BCM283X depends on ARCH_BCM283X && PINCTRL_FULL && OF_CONTROL Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-10-02mailbox: stm32_ipcc: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02video: stm32_dsi: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
2020-10-02video: stm32_ltdc: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02pinctrl: stm32: Add header with SPDX licencePatrick Delaunay
Cosmetics: Add header with SPDX licence Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02pinctrl: stm32: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02gpio: stm32: check result of ofnode_phandle_argsPatrick Delaunay
Add test on the size of ofnode_phandle_args result to avoid access to uninitialized elements in args[] field. This patch avoids the issue when gpio-ranges cell size is not 3 as expected, for example: gpio-ranges = <&pinctrl 0>; instead of gpio-ranges = <&pinctrl 0 112 16>; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02gpio: stm32: cosmetic: cleanup gpio_stm32_probePatrick Delaunay
Move the variables definition at the beggining of the function gpio_stm32_probe(). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4Patrick Delaunay
DT alignment with Linux kernel v5.9-rc4 for the STM32MP15x soc device tree files and the STMicroelectronics boards device tree files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02board: tbs2910: Use recommended distroboot addressesSoeren Moch
According to doc/README.distro fdt_addr must not be set when DTB is not available from hardware. So remove this entry. Use address 32MB above the start of DRAM for kernel_addr_r. This way we likely can avoid the self-relocation of the compressed kernel image before it decompresses to offset 0x8000 from start of DRAM. Use address 128MB above the start of DRAM for fdt_addr_r, since this is the maximum location for the end of the kernel. So we avoid overwriting the DTB. Use 512k above that for ramdisk_addr_r. This should be enough for the DTB, rest of DRAM can be used for initrd. Place boot script / extlinux.conf at offset 0 / 1MB from start of DRAM. This space is available for processing in U-Boot. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-02Merge tag 'u-boot-stm32-20201002' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Fixup SPI-NOR boot on AV96 board
2020-10-02ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96Marek Vasut
The u-boot,dm-spl DT props are missing on AV96, hence the pinmux and flash0 nodes are not included in the reduced SPL DT. This prevents SPI NOR boot from working at all. Fix this by filling them in. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-10-01Merge branch 'next' of git://git.denx.de/u-boot-usb into nextTom Rini
- Assorted XHCI improvements
2020-10-01Revert "net: smc911x: Automatically Update ethaddr with MAC"Tom Rini
Upon further discussion on the mailing list, we should not get in the situation where the generic code path to set ethaddr/etc correctly does not work. Revert this until someone can further debug the smc911x driver regarding this issue. This reverts commit 387cbf096e443705fa66776027273ed257ec6ca3. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 07:55:44 +0000