summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-26Merge git://git.denx.de/u-boot-usbTom Rini
2018-04-26Merge git://git.denx.de/u-boot-socfpgaTom Rini
2018-04-26Merge git://git.denx.de/u-boot-shTom Rini
2018-04-27arm: socfpga: Fix with the correct polling on bit is setTien Fong Chee
Commit 2baa997240d ("arm: socfpga: Add FPGA driver support for Arria 10") Polling on wrong cleared bit. Fix with correct polling on bit is set. Fixes: 2baa997240d ("arm: socfpga: Add FPGA driver support for Arria 10") Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-04-26usb: gadget: composite: fix NULL pointer when a non standard request is receivedChristophe Kerello
In case usb configuration is unknown (cdev->config == NULL), non standard request should not be processed. Remove also the cdev->config check below which will never happen. This issue was seen using ums feature. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26usb: host: dwc3: fix phys initNeil Armstrong
When no PHYs are declared in the dwc3 node, the phy init fails. This patch checks if the "phys" property is presend and reports the error returned by dev_count_phandle_with_args(). This patchs also fixes the styles issues added in last commit. This patch should fix the DWC3 support on the UniPhier SoC family. Fixes: 7c839ea70c49 ("usb: host: dwc3: Add support for multiple PHYs") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-26ARM: rmobile: Fix PMIC address on E2 SilkMarek Vasut
The PMIC is at 0x5a, fix the address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update E2 AltMarek Vasut
The E2 Alt port was broken since some time. This patch updates the E2 Alt port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update M2-N GoseMarek Vasut
The M2-N Gose port was broken since some time. This patch updates the M2-N Gose port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update H2 LagerMarek Vasut
The H2 Lager port was broken since some time. This patch updates the H2 Lager port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Enable HS200 support on M3N Salvator-XMarek Vasut
Enable the HS200 support on M3N Salvator-X . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26Merge git://git.denx.de/u-boot-rockchipTom Rini
2018-04-25Merge git://git.denx.de/u-boot-spiTom Rini
2018-04-25rockchip: defconfig: remove CONFIG_SYS_NS16550Kever Yang
We have enable NS16550 in Kconfig, do not need enable at defconfig Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: enable SYS_NS16550 for all SoCs by defaultKever Yang
All rockchip SoCs can use ns16550 driver, enable it for all and set SYS_NS16550_MEM32 for all SoCs. Version-changes: 2 - use imply instead of select Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25Revert "rockchip: firefly: Add "usb start" to auto-start USB device"Kever Yang
This reverts commit a1903c18db13e740e6bedb8955b3272dce5104e1. It's really bad idea to add "usb start" in preboot, it will spend a lot of time to scan usb bus, and most of people do not need this feature. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk322x: update MACRO for back-to-bromKever Yang
The MACRO has been update after: ee14d29 rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL We need to update the C code for it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk322x: update TPL_TEXT_BASEKever Yang
The boot0 hook including the 4-byte TAG which is at the beginning of the TEXT_BASE, now we can use a aligned TEXT BASE. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rv1108: add ofdata_to_platdata() method for driverKever Yang
Parse of data in dedicated api instead of in probe(). The clk_set_rate() may be called before the clk driver is probed, after core support set default clock. This patch fix system abort issue since: f4fcba5 clk: implement clk_set_defaults() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25rockchip: rk3128: add ofdata_to_platdata() method for driverKever Yang
Parse of data in dedicated api instead of in probe(). The clk_set_rate() may be called before the clk driver is probed, after core support set default clock. This patch fix system abort issue since: f4fcba5 clk: implement clk_set_defaults() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25rockchip: rk3036: add ofdata_to_platdata() method for driverKever Yang
Parse of data in dedicated api instead of in probe(). The clk_set_rate() may be called before the clk driver is probed, after core support set default clock. This patch fix system abort issue since: f4fcba5 clk: implement clk_set_defaults() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25config: evb-rk3399: enable make uboot.itbPeter Robinson
Similar to firefly 3399 enable the ability to create a FIT image with combined arm-trusted-firmware. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25arm: rockchip: make_fit_atf: remove unneeded importsPatrick Uiterwijk
These imports are entirely unused in the entire script. Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: use DM timer instead of rk_timerKever Yang
Disable rk_timer as SYS timer and use DM timer instead, so that we can get a better timer framework, the rk_timer is going to be clean after we conver to use DM timer or ARM arch/generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: add timer3 nodeKever Yang
Add dts node for timer3. Because of the rockchip timer can only KNOWN "dtd_rockchip_rk3368_timer" with OF_PLATDATA enable, so we override its compatible to "rockchip,rk3368-timer". Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: add -u-boot.dtsi for rock-rk3188Kever Yang
We should a -u-boot.dtsi for those config need by U-Boot only, and other part sync with kernel. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: timer: add compatible strings for rk3188 and rk3288Philipp Tomsich
The DM driver for ockchip timer blocks is also applicable to the RK3188 and RK3288 timer blocks: add 'rockchip,rk3188-timer' and 'rockchip,rk3288-timer' to its compatible list to support devices claiming compatibility with these. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: defconfig: puma-rk3399: enable RTCKlaus Goger
commit: 52280315a4 ("rtc: rewrite isl1208 to support DM") enables us to use the on-module RTC emulation with the rk3399 device model i2c driver. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3288: provide ${fdtfile}Heinrich Schuchardt
All rk3288 default configs define CONFIG_DEFAULT_DEVICE_TREE. So we can use it to define ${fdtfile} in rk3288_common.h. This variable is needed by the distro boot command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSICWadim Egorov
The generic ehci-driver (ehci-generic.c) will try to enable the clocks listed in the DTSI. If this fails (e.g. due to clk_enable not being implemented in a driver and -ENOSYS being returned by the clk-uclass), the driver will bail our and print an error message. This implements a minimal clk_enable for the RK3288 and supports the clocks mandatory for the EHCI controllers; as these are enabled by default we simply return success. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-24Merge git://git.denx.de/u-boot-videoTom Rini
2018-04-24video-uclass: Fix logical-not-parentheses warningTom Rini
With clang-4.0 and later we see: warning: logical not is only applied to the left hand side of this bitwise operator [-Wlogical-not-parentheses] if ((!gd->flags & GD_FLG_RELOC)) ^ ~ And while the compiler suggests adding parenthesis around gd->flags, a reading of the code says that we want to know when GD_FLG_RELOC is not set and then return. Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-23Merge tag 'signed-efi-2018.05' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-04-23 Some last minute fixes for 2018.05. Most of them are minor fixes. On top we have some functional improvements for the device path logic which should also help us be more compatible.
2018-04-23mmc: Staticize sd_select_bus_widthMarek Vasut
Staticize the function since it's only used in mmc.c . Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-23efi_selftest: test EFI_DEVICE_PATH_UTILITIES_PROTOCOLHeinrich Schuchardt
Provide unit tests for the EFI_DEVICE_PATH_UTILITIES_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: complete EFI_DEVICE_PATH_UTILITIES_PROTOCOLHeinrich Schuchardt
The missing services of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL are implemented. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: correcty determine total device path lengthHeinrich Schuchardt
Device paths may consist of multiple instances. Up to now we have only considered the size of the first instance. For the services of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL in most cases the total length of the device path is relevant. So let's rename efi_dp_size() to efi_dp_instance_size() and create a new function efi_dp_size() that calculates the total device path length. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: correctly determine length of empty device pathHeinrich Schuchardt
efi_dp_size() is meant to return the device path length without the end node. The length of a device path containing only an end node was incorrectly reported as 4. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: fix AppendDevicePathHeinrich Schuchardt
The logic of the AppendDevicePath service of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL is incorrectly implemented: * if both paths are NULL an end node has to be returned * if both paths are not NULL the end node of the second device path has to be kept Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: implement CreateDeviceNodeHeinrich Schuchardt
Implement the CreateDeviceNode service of the device path utility protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_selftest: fix typo in efi_selftest_devicepath.cHeinrich Schuchardt
%s/provice/provide/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_selftest: do not execute test if setup failedHeinrich Schuchardt
Executing a test after failed setup may lead to unexpected behavior like an illegal memory access. So after a setup failure we should skip to teardown. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: no support for ARMV7_NONSEC=yHeinrich Schuchardt
We do not support bootefi booting ARMv7 in non-secure mode. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23log: fix typo LOGL_EFIHeinrich Schuchardt
According to the documentation the EFI log category is called LOGC_EFI. All other categories start with LOGC_. So let's fix it. Fixes: 1973b381a1b3 ("log: add category LOGC_EFI") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23Merge git://git.denx.de/u-boot-uniphierTom Rini
2018-04-24ARM: uniphier: move SPL stack addressMasahiro Yamada
Currently, the address region, 0xf8000 - 0x100000, is used for SPL stack for the 32bit SoCs. Because the U-Boot proper image starts from 0x70000, the maximum size of the U-Boot proper image is 544KB (0x70000 - 0xf8000) for the NOR boot mode. Now uniphier_v7_defconfig is almost hitting this size limit. Changing CONFIG_SPL_STACK can raise the size limit with less impact. With this, the size limit will increase to 576KB (0x70000 - 0x100000). If we need to increase it even more, we would be able to change CONFIG_SYS_UBOOT_BASE at the cost of the flashing command changes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24ARM: uniphier: select a correct mmc device before flashing imagesMasahiro Yamada
Some boards support an SD card and an eMMC device at the same time. Since both belong to 'mmc', they are identified by a device number. When the device number of the eMMC is 1 instead 0, "mmc dev" command must be performed to switch the target device before flashing images. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24clk: uniphier: disable SPL_CLKMasahiro Yamada
The last clock consumer in SPL, SD/eMMC driver, gave up using the clock driver. The clock driver is only used in U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-07 12:02:15 +0000