summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-22arm: arm64 32bit address relocationIbai Erkiaga
Current relocation code is limited to 21bit PC-relative addressing which might not be enough for bigger code sizes. The following patch increases the addressing to 32bit PC-relative. This feature is specially interesting if U-Boot is build without optimiation (-O0) as the text section is increased significativelly. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
2019-04-22travis: Add srecord packageMarek Vasut
At least MIPS Boston currently uses srec_cat tool to fiddle with srecords. There will be other platforms coming, so install the tool to prevent build problems. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com>
2019-04-22Add target to generate initial environmentStefano Babic
The initial environment is linked to the u-boot binary. Modifying the environment from User Space with the env tools requires that the tools are always built together with the bootloader to be sure that they contain the initial environment in case no environment is stored into persistent storage or when a board boots with just the default environment. This makes difficult for distros to provide a general package to access the environment. A simpler way is if the tools are generic for all boards and a configuration file is given to provide the initial environment. The patch just generates the initial environment by extracting it from the compiled object. This file can then be used for tools in user space to initialize the environment. Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-04-22spl: ymodem: Add support for loading full fitImagesMarek Vasut
Add support for loading fully featured fitImages over YModem in SPL. This is useful when various advanced features of full fitImages are needed in SPL. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2019-04-22fit: load all fragments from the extra configurationsPeter Ujfalusi
Currently only the first fdt is loaded from the extra configuration of FIT image. If the configuration have multiple fdt, load them all as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-22misc: fs_loader: Replace label with DT phandleTien Fong Chee
In previously label which will be expanded to the node's full path was used, and now replacing label with most commonly used DT phandle. The codes were changed accordingly to the use of DT phandle and supporting multiple instances. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-22arm: fix hvc callIbai Erkiaga
HVC call makes use of 6 mandatory arguments rather than 7 in the same way as SMC calls. The 7th argument is optional (Client ID) for both HVC and SMC but is implemented as 16-bit parameter and register R7 or W7. The aim of this patch is just fix compilation error due to an invalid asm code in the HVC call so that's why the 7th argument is removed. The issue does not report any error in a normal build as hvc_call is not used at all and is optimized by the compiler. Using -O0 triggers the error so the patch is intended to fix issues on a ongoing effor to build U-Boot with -O0. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
2019-04-22Support boot Android image without address on bootm commandShawn Guo
It works perfectly fine to boot an Android boot.img with bootm command followed by an explicit address argument that holds the image. But if we have boot.img downloaded into default 'loadaddr', and then boot it using bootm command without the address argument, we will run into problem, because U-Boot fails to find ramdisk and fdt (second area) in boot.img. The current Android image support assumes there is always an address argument on bootm command. However just like booting any other images, 'loadaddr' should be used when address argument is missing from bootm command. It patches boot_get_ramdisk() and boot_get_fdt() a bit to support this quite common usage of bootm command for Android image. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-22cmd: ximg.c: Add support for getting external data address and lengthTien Fong Chee
This function supports getting both data address and length for existing FIT subimage and FIT external data. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-22ARMv8: Disable fwcall when PSCI is enabledAng, Chee Hong
When PSCI is enabled, we are expecting U-Boot which now act as EL3 software will handle all the PSCI calls. We won't need fwcall as no further HVC or SMC are needed. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-04-22ARMv8: Allow SiP service extensions on top of PSCI codeChee Hong Ang
Allow PSCI layer to handle any SiP service functions added by platform vendors. PSCI layer will look for SiP service function in the SiP function table located in '._secure_svc_tbl_entries' section if the SMC function identifier is not found in the PSCI standard functions table. Use DECLARE_SECURE_SVC macro to declare and add platform specific SiP service function. This new section '._secure_svc_tbl_entries' is located next to '._secure.text' section. Refer to arch/arm/cpu/armv8/u-boot.lds. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2019-04-22test: call hexdump tests via `ut lib`Heinrich Schuchardt
The unit tests in test/lib/hexdump.c are not related to the device tree. So they should be executed via `ut lib` and not via `ut dm`. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-22misc: fs_loader: Add support for initializing block deviceTien Fong Chee
Firmware loader would encounter problem if the block device is accessed before initializing it. This patch would adding the support of probing block device and initializing block before the block device is accessed by firmware loader. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-22cmd: add exception commandHeinrich Schuchardt
The 'exception' command allows to test exception handling. This implementation supports ARM, x86, RISC-V and the following exceptions: * 'breakpoint' - prefetch abort exception (ARM 32bit only) * 'unaligned' - data abort exception (ARM only) * 'undefined' - undefined instruction exception Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22bcm963158: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm963158: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm63158: add nand controllerPhilippe Reynes
Add the nand controller in the bcm63158 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22bcm968580xref: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm968580xref: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm6858: add nand controllerPhilippe Reynes
Add the nand controller in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22bcm968380gerg: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm96838gerg. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm968380gerg: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm96838gerg. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm6838: add nand controllerPhilippe Reynes
Add the nand controller in the bcm6838 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add an option to read the write-protect from device ↵Philippe Reynes
tree The option write-protect may only change on the kernel command line, we add a property in the device tree to be more flexible. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add parameter parameter-page-big-endianPhilippe Reynes
The parameter page isn't always in big endian, so we add an option to choose the endiannes of the parameter page. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add initial supportPhilippe Reynes
The driver brcmnand come from linux kernel 4.18. Only SoC bcm6838 and bcm6858 are supported. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22compat linux: import completion from linux 4.18Philippe Reynes
This patch port the file include/linux/completion.h from linux 4.18 to u-boot. It define the structure but all the function are stubbed. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22include: linux: io: define devm_ioremap on board with ioremapPhilippe Reynes
The macro devm_ioremap is only defined for configuration that doesn't have ioremap. But this macro may also be defined on configuration with ioremap. This patch remove the condition for the macro devm_ioremap, so it's always defined. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22arm: asm: io.h: define readX_relaxed and writeX_relaxedPhilippe Reynes
This patch port the function readX_relaxed and writeX_relaxed from kernel 4.18. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: provide several helpers to do common NAND operationsBoris Brezillon
Linux commit 97d90da8a88 ("mtd: nand: provide several helpers to do common NAND operations") This is part of the process of removing direct calls to ->cmdfunc() outside of the core in order to introduce a better interface to execute NAND operations. Here we provide several helpers and make use of them to remove all direct calls to ->cmdfunc(). This way, we can easily modify those helpers to make use of the new ->exec_op() interface when available. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: import nand_hw_control_init()Marc Gonzalez
Linux commit d45bc58dd3b ("mtd: nand: import nand_hw_control_init()") The code to initialize a struct nand_hw_control is duplicated across several drivers. Factorize it using an inline function. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: add get/set of_node/flash_node helpersBrian Norris
Linux commit 28b8b26b308 ("mtd: add get/set of_node/flash_node helpers") We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Philippe Reynes: only add function nand_set_flash_node and nand_get_flash_node because others were already backported] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmelTom Rini
Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22at91: corvus_defconfig: get rid of build warningsHeiko Schocher
fix CONFIG_OF_EMBED and add CONFIG_DM_USB build warnings. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Various fastboot, dwc2/stm32 updates
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Various stratix10, gen5 updates
2019-04-21usb: dwc2: fix gadget disconnectFabrice Gasnier
This fixes a disconnect issue detected with fastboot command, when using dwc2 driver. - On u-boot side: uboot>$ fastboot 0 - On USB host PC side, few seconds after PC>$ fastboot reboot # Get stuck, uboot target never reboots By enabling DEBUG_ISR logs, the bus suspend interrupt is seen before the PC command has been issued. When the USB bus suspend occurs, there's a HACK that disables the fastboot (composite driver). Here is the call stack upon USB bus suspend: - dwc2_handle_usb_suspend_intr() - dev->driver->disconnect() - composite_disconnect() - reset_config() - f->disable() - fastboot_disable() - usb_ep_disable(f_fb->out_ep); - usb_ep_disable(f_fb->in_ep); .. other disable calls. When the resume interrupt happens, everything has been disabled, then nothing happens. fastboot command gets stuck on HOST side. Remove original HACK, that disconnects the composite driver upon USB bus suspend. Implement disconnect detection instead: - check GINTSTS OTG interrupt - read GOTGINT register - check GOTGINT, SesEndDet bit (e.g. session end) This is inspired by what is implemented currently in Linux dwc2 driver. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-04-21usb: reload watchdog during ums commandPatrick Delaunay
Reload the watchdog in the mass storage command ums to avoid reboot during the usb waiting loop when the host doesn't send any request. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21fastboot: add support for 'getvar platform'Eugeniu Rosca
Our R-Car3 Android userspace relies on the output of 'fastboot getvar platform' and U-Boot currently is not able to handle it: host $> fastboot getvar platform getvar:platform FAILED (remote: Variable not implemented) finished. total time: 0.001s We either have the option of adding 'fastboot.platform' variable to the default/saved environment as a workaround or add proper 'fastboot getvar platform' support in U-Boot via this patch. In the latter case, other platforms can benefit from it too. Note that R-Car3 already exports 'platform' environment variable via v2019.01 commit 00e4b57e9e71c3 ("ARM: rmobile: Set environment variable containing CPU type"). Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-04-21fastboot: Replace literal 32 with PART_NAME_LENAlex Kiernan
Where we have to compute partition names, rather than using a hardcoded 32 for the partition name length, replace with PART_NAME_LEN. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
2019-04-21stm32mp1: add stusb1600 support for DK1 and DK2 boardPatrick Delaunay
The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21stm32mp1: migrate USBOTG device to driver modelPatrick Delaunay
Use the DWC2 device driver with DM_USB_GADGET support and cleanup the USB support in STM32MP1 board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBOPatrick Delaunay
Remove the HOST support for STM32MP1 USBO device = OTG DWC2. The current DWC2 driver have no dynamic detection of device, So it is dangerous to have start 3V3 when PC is connected to the micro USB connector. => it is preferable to have only DEVICE support CONFIG_USB_GADGET_DWC2_OTG for OTG port See DWC3 driver for clean dual role support... Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21usb: dwc2: add support for STM32MP1Patrick Delaunay
Add compatible "st,stm32mp1-hsotg" and associated driver data to manage the usb33d-supply and the ST specific register for VBus sensing. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> # Conflicts: # drivers/usb/gadget/dwc2_udc_otg.c Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2_udc_otg: Add tx_fifo_sz array supportPatrice Chotard
All TX fifo size can be different, add tx_fifo_sz_array[] into dwc2_plat_otg_data to be able to set them. tx_fifo_sz_array[] is 17 Bytes long and can contains max 16 tx fifo size (synopsys IP supports max 16 IN endpoints). First entry of tx_fifo_sz_array[] is the number of valid fifo size the array contains. In case of tx_fifo_sz_array[] doesn't contains the same number of element than max hardware endpoint, display a warning message. Compatibility with board which doesn't use tx_fifo_sz_array[] (Rockchip rk322x/rk3128/rv1108/rk3288/rk3036) is kept. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 registerPatrick Delaunay
Some DWC2 ip variant doesn't use 16 hardware endpoint as hardcoded in the driver. Bits INEps [29:26] of HWCFG4 register allows to get this information. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add function for session B checkPatrick Delaunay
Add a new function to check the session B validity, to be use to check cable connection. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add force-b-session-valid supportPatrick Delaunay
Handle "force-b-session-valid" property from DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: force reset assert before to probe the driverPatrick Delaunay
Reset the hardware to be sure of the device state. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: convert driver to DM_USB_GADGETPatrick Delaunay
Minimal conversion to driver model by using the uclass UCLASS_USB_GADGET_GENERIC based on: - reset uclass - clock uclass - generic uclass. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-07 06:25:58 +0000