summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-30ARM: zynq: remove unused CONFIG_ZC770_XM01* optionsMasahiro Yamada
These are defined, but not referenced at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Fix types in ps7_spl_initMichal Simek
The patch is fixing the following Warning: arch/arm/mach-zynq/ps7_spl_init.c:133:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] while (ioread(addr) < delay) ^ Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add support for zc770-xm011-x16 configurationMichal Simek
zc770-xm011 is x8 width configuration. This FMC card has also x16 variant which requires different ps7_init configuration. This patch adds it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm013 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm012 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm011 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm010 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30doc: zynq: Describe status of zc770-xm011Michal Simek
zc770-xm011 is also added and supported. Reflect this in README. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-24doc: Update the zynq u-boot statusEzequiel Garcia
NAND and QSPI devices are now supported, so mark them as such. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-24arm: zynq: Enable SPL_CLK only if SPL is enabledEzequiel Garcia
Setup proper dependency in Kconfig for SPL_CLK. If SPL is not enabled, SPL_CLK shouldn't be selected. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-16tools: Update python "help" tests to cope with "more" odditiesTom Rini
In some cases when "more" is told to page a given file it will prepend the output with: :::::::::::::: /PATH/TO/THE/FILE :::::::::::::: And when this happens the output will not match the expected length. Further, if we use a different pager we will instead fail the coverage tests as we will not have 100% coverage. Update the help test to remove the string in question. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-16Merge git://git.denx.de/u-boot-i2cTom Rini
2018-01-16Merge git://git.denx.de/u-boot-dmTom Rini
2018-01-16i2c: mxc_i2c: Use or operationPeng Fan
The operation should be OR, not BIT OR. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-01-16imx: mx7ulp: modify lpi2c seq numberPeng Fan
Modify the lpi2c alias seq number to align with device. Then no need to add 4 to get the device index. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-16i2c: lpi2c: do not add 4 for bus seqPeng Fan
The number 4 is dedicated on i.MX7ULP, but lpi2c will be reused on i.MX8, 4 is not valid. The seq number could be configured by alias node. The following patch will use i2c4 as the begin for i.MX7ULP. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-15test: Set the DTC environment variableSimon Glass
Set this to our own device-tree compiler since we know it is new enough to run the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15dtoc: Allow DTC environment variable to provide path to dtcSimon Glass
The system device-tree compiler may not be new enough to run the tests we use in U-Boot (e.g. with binman). Allow use of a DTC environment variable to point to the correct dtc. If not defined, the dtc on the default PATH is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15armv8: secure firmware: fix incorrect unit address in node nameAndre Przywara
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Remove the unit address from the config node name when U-Boot deals with secure firmware FIT images. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15tools: fix incorrect usage of DT node unit addressAndre Przywara
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Correct the generated unit names when U-Boot's mkimage creates a FIT image. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15sunxi: arm64: correct usage of DT node address in FIT generationAndre Przywara
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Adjust the FIT build script for 64-bit Allwinner boards to remove the bogus addresses from the node names and avoid the warnings. This avoids a warning with recent versions of the dtc tool. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15fix incorrect usage of DT node unit address in commentsAndre Przywara
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Fix all occurences in the tree where node names were mentioned in comments, to not give bad examples to the reader. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15doc: fix incorrect usage of DT node unit addressAndre Przywara
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Fix all occurences in various documentation files where this was not observed, to not give bad examples to the reader. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15doc: FIT image: fix incorrect examples of DT node unit addressAndre Przywara
The DT spec demands a unit-address of a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Fix all occurences in the FIT image example files where this was not observed, to not give bad examples to the reader. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15doc: FIT image: fix incorrect description of DT node unit addressAndre Przywara
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Fix all occurences in the FIT image documentation files where this was not observed, to not give bad examples to the reader. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15binman: Run code coverage testsSimon Glass
Binman has 100% test coverage for the code as it is at present. To encourage it to stay that way, run the code-coverage test as part of the normal U-Boot tests. This is RFC because it requires the Python code coverage tools to be available. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15travis.yml: Run tests for toolsSimon Glass
Run tests for the Python tools used by U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15test: Run dtoc testsSimon Glass
Update the test script to run the dtoc tests also. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15test: Run buildman testsSimon Glass
Update the test script to run the buildman tests also. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15test: Run patman testsSimon Glass
Update the test script to run the patman tests also. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15test: Run binman testsSimon Glass
Update the test script to run the binman tests also. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15Merge git://git.denx.de/u-boot-netTom Rini
2018-01-15Merge git://git.denx.de/u-boot-imxTom Rini
2018-01-15db410c: on aarch64 the fdtfile is in per-vendor subdirectoryRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15db410c: add reserved-memory node to dtsRob Clark
If lk lights up display and populates simple-framebuffer node, it will also setup a reserved-memory node (needed by simplefb on linux). But it isn't clever enough to cope when the reserved-memory node is not present. Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15db410c: use the device tree parsed by the lk loader.Jorge Ramirez-Ortiz
We dont need to keep copies of the properties that we are going to fixup since we will be using the dtb provided by the firmware. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATERob Clark
Similar to CONFIG_OF_BOARD, but in this case the fdt is still built by u-boot build. This allows the board to patch the fdt, etc. In the specific case of dragonboard 410c, we pass the u-boot generated fdt to the previous stage of bootloader (by embedding it in the u-boot.img that is loaded by lk/aboot), which patches the fdt and passes it back to u-boot. Signed-off-by: Rob Clark <robdclark@gmail.com> [trini: Update board_fdt_blob_setup #if check] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-15db410c: replace reset driver with psciJorge Ramirez-Ortiz
this should be the norm for armv8 platforms. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db410c: update wlan and bt mac addresses from firmwareJorge Ramirez-Ortiz
The firmware that runs before u-boot modifies u-boot's device tree adding the local-mac-address and local-bd-address properties for the compatibles "qcom,wcnss-bt" and "qcom,wcnss-wlan". This commit reads that firmware, retrieves the properties and fixups the device tree that is passed to the kernel before booting. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db410c: configs: increase gunzip buffer size for the kernelJorge Ramirez-Ortiz
the kernel fails to boot when it goes over the limit. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db820c: stop autoboot when vol- pressedJorge Ramirez-Ortiz
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db820c: enable pmic gpios for pm8994Jorge Ramirez-Ortiz
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db820c: add qualcomm dragonboard 820C supportJorge Ramirez-Ortiz
This commit adds support for 96Boards Dragonboard820C. The board is based on APQ8086 Qualcomm Soc, complying with the 96Boards specification. Features - 4x Kyro CPU (64 bit) up to 2.15GHz - USB2.0 - USB3.0 - ISP - Qualcomm Hexagon DSP - SD 3.0 (UHS-I) - UFS 2.0 - Qualcomm Adreno 530 GPU - GPS - BT 4.2 - Wi-Fi 2.4GHz, 5GHz (802.11ac) - PCIe 2.0 - MIPI-CSI, MIPI-DSI - I2S U-Boot boots chained from LK (LK implements the fastboot protocol) in 64-bit mode. For detailed build instructions see readme.txt in the board directory. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15arm: mach-snapdragon: refactor clock driverJorge Ramirez-Ortiz
In preparation to add support for the Dragonboard820c (APQ8096), refactor the current Snapdragon clock driver. No new functionality has been added. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15env: enable accessing the environment in an EXT4 partitionJorge Ramirez-Ortiz
For example to store the environment in a file named "/uboot.env" in MMC "0", where partition "1" contains the EXT4 filesystem, the following configs should be added to the board's default config: CONFIG_ENV_IS_IN_EXT4=y CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_EXT4_INTERFACE="mmc" Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [trini: Fix some line over 80 chars issues] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-15phy: atheros: set auto-negotiation for AR8021Zhao Qiang
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Add to Kconfig and convertNobuhiro Iwamatsu
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Fix misaligned cache operation warningNobuhiro Iwamatsu
When we using network on board using sh-eth, it prints a lot of "CACHE: Misaligned operation at range" messages. This commit fixes this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Change read/write() param to struct sh_eth_infoNobuhiro Iwamatsu
This changes Change structure used in sh_eth_read and sh_eth_write function from struct sh_eth_dev to struct sh_eth_info. This is necessary to convert to Driver Model. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Remove bd_t from sh_eth_config()Nobuhiro Iwamatsu
bd_t is not used in sh_eth_config(). This deletes bd_t from sh_eth_config() Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-15 14:28:08 +0000