summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-11-17Fixed mips_io_port_base build errors.Jean-Christophe PLAGNIOL-VILLARD
This patch has been sent on: - 29 Sep 2007 Although mips_io_port_base is currently a part of IDE command, it is quite fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move it to MIPS general part, and introduce `set_io_port_base()' from Linux. This patch is triggered by multiple definition of `mips_io_port_base' build error on gth2 (and tb0229 also needs this fix.) board/gth2/libgth2.a(gth2.o): In function `log_serial_char': /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here make: *** [u-boot] Error 1 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-17Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2007-11-17Fix a bug in the slave serial programming mode for the XilinxWolfgang Denk
Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if the most significant bit was set, which did not work on any architecture where "char" defaulted to be an unsigned type. Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-1786xx: Fix broken variable reference when #def DEBUGing.Jon Loeliger
Sometimes you can't reference the DDR2 controller variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-11-17make 8610 board use pixis resetJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2007-11-17Unify pixis_reset altbank across board familiesJason Jin
Basically, refactor the CFG_PIXIS_VBOOT_MASK values into the separate board config files. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-11-17Merge branch 'master' of /home/wd/git/u-boot/workWolfgang Denk
2007-11-17Fix warning: pointer targets in assignment differ in signednessJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-16Fix warning differ in signedness in common/cmd_ide.cJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-16Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk
2007-11-13ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latchingStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-11-13Merge branch 'master' of git://www.denx.de/git/u-bootStefan Roese
2007-11-13[UC101] SRAM now with 2 MB working.Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-11-06Implement general ULi 526x Ethernet driver support in U-bootRoy Zang
This patch implements general ULi 526x Ethernet driver. Until now, it is the only native Ethernet port on MPC8610HPCD board, but it could be used on other boards with ULi 526x Ethernet port as well. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-06NET: Add Ethernet 1000BASE-X support for PPC4xxLarry Johnson
This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which returns non-zero iff the PHY registers are configured for 1000BASE-X. The "mii info" command is modified to distinguish between 1000BASE-T and -X. Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-06NET: Cosmetic changesLarry Johnson
Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-06Merge git://www.denx.de/git/u-bootBen Warren
2007-11-03Cleanup coding style; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-03fix wording in READMEBruce Adler
Changed the wording to properly describe the shadowing of the environment from ROM to RAM Signed-off-by: Bruce Adler <bruce.adler@acm.org>
2007-11-03blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mkShinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2007-11-03Trimmed some variables in ne2000.cVlad Lungu
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2007-11-03Fix the issue of usb_kbd driver missing the scan code of key 'z'.Zhang Wei
The scan code of the key 'z' is 0x1d, which should be handled. The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI controller. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-11-03Fix USB support issue for MPC8641HPCN board.Zhang Wei
The configuration file has already enabled USB, but it missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB on MPC8641HPCN can not work because of the wrong USB register endian. And add the USB command to U-Boot commands list. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-11-03Use config_cmd_default.h instead of config_cmd_all.hJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-03TQM5200: Call usb_cpu_init() during board initMarian Balakowicz
usb_cpu_init() configures GPS USB pins, clocks, etc. and is required for proper operation of kernel USB subsystem. This setup was previously done in the kernel by the fixup code which is being removed, thus low level init must be done by U-boot now. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-11-03Fix typo in nfs.cGuennadi Liakhovetski
An obvious typo. Originally fixed in linkstation u-boot port. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2007-11-03Fix a typo in cpu/mpc824x/interrupts.cGuennadi Liakhovetski
Since December 2003 the timer_interrupt_cpu() function in cpu/mpc824x/interrupts.c contains what seems to be a superfluous parameter. Remove it. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2007-11-03add ft_cpu_setup(..) on mpc8260Sergej Stepanov
Add ft_cpu_setup(..)-function to adapt it for use with libfdt based on code from mpc5xxx Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
2007-11-03changes for IDS8247 board supportSergej Stepanov
To get the IDS8247 board working following are done: - FCC2 is deactivated - FCC1 is activated - I2C is activated - CFI driver is activated - Adapted for use with LIBFDT Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
2007-11-02Merge git://www.denx.de/git/u-bootBen Warren
2007-11-02Merge branch 'master' of /home/wd/git/u-boot/workWolfgang Denk
2007-11-02Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-11-01ATSTK1002: Remove default ethernet addressesHaavard Skinnemoen
Wolfgang is right: It's not a good idea to set up default initial ethernet addresses for a board, even though they belong to the local range. This will change the failure mode from "IT manager screams at you for using duplicate ethernet addresses" to a nice error message explaining that the ethernet address hasn't been set properly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-01DHCP Client FixJustin Flammia
This is a multi-part message in MIME format. commit e6e505eae94ed721e123e177489291fc4544b7b8 Author: Justin Flammia <jflammia@savantav.com> Date: Mon Oct 29 17:19:03 2007 -0400 Found a bug in the way the DHCP Request packet is built, where the IP address that is offered by the server is bound to prematurely. This patch is a fix of that bug where the IP address offered by the DHCP server is not used until after the DHCP ACK from the server is received. Signed-off-by: Justin Flammia <jflammia@savantav.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk
2007-11-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk
2007-10-29DHCP Client FixJustin Flammia
This is a multi-part message in MIME format. commit e6e505eae94ed721e123e177489291fc4544b7b8 Author: Justin Flammia <jflammia@savantav.com> Date: Mon Oct 29 17:19:03 2007 -0400 Found a bug in the way the DHCP Request packet is built, where the IP address that is offered by the server is bound to prematurely. This patch is a fix of that bug where the IP address offered by the DHCP server is not used until after the DHCP ACK from the server is received. Signed-off-by: Justin Flammia <jflammia@savantav.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-10-27Merge git://www.denx.de/git/u-bootStefan Roese
2007-10-25ColdFire 54455: Fix correct boot location for atmel and intelTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire: Fix build error when CONFIG_WATCHDOG is definedTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire 5329: Assign correct SDRAM size and fix cacheTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire 5253: Assign correct SDRAM sizeTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire 5282: Fix external flash boot and return dramsizeTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).Bartlomiej Sieka
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-10-24Merge branch 'motionpro_ng' of /home/tur/git/u-bootWolfgang Denk
2007-10-24TQM5200: fix spurious characters on second serial interfaceMartin Krause
With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-18 02:48:48 +0000