summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-11-09Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMACBen Warren
All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
2008-11-09Moved initialization of MPC8XX SCC to cpu_eth_init()Ben Warren
Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Moved initialization of MPC8220 FEC to cpu_eth_init()Ben Warren
Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Moved initialization of QE Ethernet controller to cpu_eth_init()Ben Warren
Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Moved initialization of FCC Ethernet controller to cpu_eth_initBen Warren
Affected boards: Several MPC8xx boards Several MPC8260/MPC8272 boards Several MPC85xx boards Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Fix typo in cpu/mpc85xx/cpu.cBen Warren
CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_initShinya Kuribayashi
This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init as a part of ongoing eth_initialize cleanup work. The function ret value is also fixed as it should be negative on fail. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()Ben Warren
Also, removed the driver initialization from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09xilinx_emaclite buffer overrunClive Stubbings
Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and PKTSIZE_ALIGN bytes long. Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.richardretanubun
The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0] This patch makes these function use the devname argument that is passed in to allow access to the phy registers of other devices in devlist[]. Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Adds two more ethernet interface to 83xxrichardretanubun
Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info. Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-11-09Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2008-11-09Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-11-09Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk
2008-11-09Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-11-09Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk
2008-11-07AT91: Replace AT91_BASE_EMAC by the board specific values.Stelian Pop
AT91_BASE_EMAC is never used outside the board specific files, so replace its usage by the board specific AT91xxx_BASE_EMAC. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-07AT91: Replace (undefined) AT91_ID_US* by the board specific values.Stelian Pop
AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined. Since they are never used outside the board specific files, they can be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 / AT91xxx_ID_US2. Bug spotted by Jesus Alvarez <jalvarez@micromint.com>. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-04Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-04Custom AFEB9260 board supportSergey Lapin
This patch provides support for AFEB9260 board, a product of OpenSource hardware and software. Some commertial projects are made with this design. A board is basically AT91SAM9260-EK with some modifications and different peripherals and different parts used. Main purpose of this project is to gain experience in hardware design. More info: http://groups.google.com/group/arm9fpga-evolution-board (In Russian only, sorry). Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb Signed-off-by: Sergey Lapin <slapin@ossfans.org>
2008-11-04Change to use "do_div" macroTomohiro Masubuchi
Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
2008-11-04ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directoryRoman Mashak
OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory. It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap Signed-off-by: Roman Mashak <romez777@gmail.com>
2008-11-04ARM/Versatile port: Removed unused functionsRoman Mashak
Removal of never used functions. Signed-off-by: Roman Mashak <romez777@gmail.com>
2008-11-03ColdFire: Fix M5329EVB and M5373EVB nand issueTsiChung Liew
Fix compilation issue caused by a few mismatches. Provide proper nand chip select enable/disable in nand_hwcontrol() rather than in board_nand_init() just enable once. Remove redundant local nand driver functions - nand_read_byte(), nand_write_byte() and nand_dev_ready() to use common nand driver. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Fix compilation errorTsiChung Liew
The error was caused by the change for strmhz() in cpu.c. A few of them were one extra close parenthesis. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Add MCF5301x CPU and M53017EVB supportTsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Add SBF support for M52277EVBTsiChung Liew
Add serial boot support Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Use CFI driver for M5272C3TsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Relocate FEC's GPIO and mii functions protocolsTsiChung Liew
Place FEC pin assignments in cpu_init.c from platform's mii.c Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Remove platforms mii.c fileTsiChung Liew
Will use mcfmii.c driver in drivers/net rather than keep creating new mii.c for each future platform. Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB, M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB, M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's mii.c Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Modules header files cleanupTsiChung Liew
Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG, MDHA, SKHA, INTC, and FlexBus structures and definitions in immap_5xxx.h to more unify modules header files. Append DSPI support for m547x_8x. SSI cleanup. Remove USB Host structure from immap_539.h. Apply changes to use FlexBus structures in mcf52x2's cpu_init.c and platform configuration files. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03ColdFire: Remove linker fileTsiChung Liew
Each different build for M54455EVB and M5235EVB will create a u-boot.lds linker file. It is redundant to keep the u-boot.lds Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-02ppc: Fix compile warnings when !CONFIG_OF_LIBFDTPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-11-02common/Makefile: create others group for non core, environment and command filesJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-02TQM8260: use CFI flash driver instead of custom driver.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-02Consolidate MAX/MIN definitionsAndy Fleming
There were several, now there is one (two if you count the lower-case versions). Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-11-02mgsuvd: remove unused defines in config file.Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-11-02Coding Style cleanup, update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-01Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2008-11-01Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk
2008-11-01Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk
2008-11-01Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2008-11-01Merge branch 'master' of git://git.denx.de/u-boot-fdtWolfgang Denk
2008-11-01Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2008-10-31NAND: Allow NAND and OneNAND to coexistAlessandro Rubini
This removes in nand.h code that is verbatim duplicated from bbm.h, including directly bbm.h in nand.h. The previous state of affairs prevented compiling code for a board hosting both NAND and OneNAND chips. Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-31JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.Scott Wood
Reported-by: Alessandro Rubini <rubini-list@gnudd.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-31NAND: Add NAND support for MPC8536DS boardJason Jin
This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file. It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image. Singed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-31NAND: Fix CONFIG_ENV_ADDR for MPC8572DSHaiying Wang
CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE). Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-31sh: rsk7203: Moved rsk7203 board to board/renesasNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 23:13:49 +0000