index
:
u-boot-toradex.git
2011.12-colibri_vf
2014.04-toradex
2014.10-toradex
2014.10-toradex-next
2015.04-imx7-1.1.0_ga-toradex-next
2015.04-toradex
2015.04-toradex-next
2016.11-toradex
2016.11-toradex-next
colibri
colibri-next
colibri_vf
toradex_2019.07
toradex_2019.07-next
toradex_2020.07
toradex_imx6
toradex_imx_lf_v2022.04
toradex_imx_v2017.03_4.9.123_imx8mm_ga-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta1-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta2-bring_up
toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringup
toradex_imx_v2018.03_4.14.78_1.0.0_ga-bringup
toradex_imx_v2018.03_4.14.98_2.3.0_bringup
toradex_imx_v2020.04_5.4.24_2.1.0
toradex_imx_v2020.04_5.4.70_2.3.0
toradex_ti-u-boot-2021.01_bringup
toradex_ti-u-boot-2023.04
U-Boot bootloader for Apalis and Colibri modules
Toradex AG
summary
refs
log
tree
commit
diff
log msg
author
committer
range
Age
Commit message (
Expand
)
Author
2018-05-31
MLK-18456-2 DTS: mx6sx_arm2: Add board DTS for iMX6SX 14x14 ARM2
Ye Li
2018-05-31
MLK-18456-1 DTS: mx6sx_arm2: Add board DTS files for 17x17 ARM2
Ye Li
2018-05-31
MLK-18455 mxc_spi: Fix issue for DM driver
Ye Li
2018-05-23
MLK-18367 imx8mm: change the GIC clock source
Bai Ping
2018-05-23
MLK-18344: add OP-TEE support for i.Mx 8MM
Silvano di Ninno
2018-05-23
MLK-18341-3 imx8mm_evk: Enable the TMU driver
Ye Li
2018-05-23
MLK-18341-2 DTS: imx8mm_evk: Add TMU node
Ye Li
2018-05-23
MLK-18341-1 thermal: nxp_tmu: Add support for thermal sensor on iMX8MM
Ye Li
2018-05-23
MLK-18333-3 imx8mm: add qspi boot support
Peng Fan
2018-05-23
MLK-18333-2 imx8m: add QSPI boot dev
Peng Fan
2018-05-23
MLK-18333-1 spl: nor: add fit image support
Peng Fan
2018-05-23
MLK-18325 imx8mm_evk: add pmic BD71837/BD71840 support in spl
Robin Gong
2018-05-23
MLK-18322 imx8mm: Add hab suport
Ye Li
2018-05-23
MLK-17997: video: imx: hdp: Add HDMI RX firmware loading
Sandor Yu
2018-05-23
MLK-18316 imx8: Fix USBOTG disconnect when XRDC blocking is enabled
Ye Li
2018-05-23
MLK-18318: mx7ulp: Enable QSPI interrupt as a wakeup source on MX7ULP
Fabio Estevam
2018-05-23
MLK-18310: change the i.MX8QXPB0 dtb load address for mfgtool
Han Xu
2018-05-23
MLK-18306 configs: imx8mm: enable ARCH_MISC_INIT
Peng Fan
2018-05-23
MLK-18290-5 imx8mm_evk: Add board codes for USB
Ye Li
2018-05-23
MLK-18290-4 usb: ci_udc: Add function to remove usb device
Ye Li
2018-05-23
MLK-18290-3 imx8mm: Add SOC level support for OTG USB
Ye Li
2018-05-23
MLK-18290-2 ehci-mx6: Update driver to support i.MX8MM
Ye Li
2018-05-23
MLK-18290-1 DTS: imx8mm-evk: Add usbotg1 and usbotg2 nodes
Ye Li
2018-05-23
MLK-18289-2 imx8mm_evk: Add codes to setup typec PD charging
Ye Li
2018-05-23
MLK-18289-1 tcpc: Update driver to support two ports logic
Ye Li
2018-05-23
MLK-18288 imx8mm_evk: Fix USDHC2 CD issue
Ye Li
2018-05-23
MLK-18268 arm: imx8: power up MU
Peng Fan
2018-05-23
MLK-18262 usb: cnds3: gadget: correct maxpacketsize to be 512 for HS
Li Jun
2018-05-23
MLK-18264 imx8: ahab: Fix verify image issue
Ye Li
2018-05-23
MLK-18243-18: arm: imx: add i.MX8MM EVK board support
Ye Li
2018-05-23
MLK-18243-17: arm: mach-imx: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Ye Li
2018-05-23
MLK-18243-16 arm: dts: add imx8mm dtsi
Peng Fan
2018-05-23
MLK-18243-15 spi: fspi: Fix 3bytes access
Ye Li
2018-05-23
MLK-18243-14 spi: fspi: init unused LUT to 0
Peng Fan
2018-05-23
MLK-18243-13 drivers: pinctrl: support i.MX8MM
Peng Fan
2018-05-23
MLK-18243-12 arm: imx8m: add cpu revision for i.MX8MM
Peng Fan
2018-05-23
MLK-18243-11 arm: imx8m: get cpu chip id for i.MX8MM
Ye Li
2018-05-23
MLK-18243-10 arm: imx8m: soc: enable SCTR clock before timer init
Peng Fan
2018-05-23
MLK-18243-7 arm: imx8m: refine the MMU table to cover larger DRAM space
Peng Fan
2018-05-23
MLK-18243-6 arm: imx8m: add clock driver for i.MX8MM
Peng Fan
2018-05-23
MLK-18243-5 arm: mach-imx: iomux: add i.MX8MM PE property
Ye Li
2018-05-23
MLK-18243-4 arm: imx8m: add pin header for i.MX8MM
Peng Fan
2018-05-23
MLK-18243-3 arm: imx8m: add clocks definition for i.MX8MM
Peng Fan
2018-05-23
MLK-18243-2 arm: imx8m: add regs definition for i.MX8MM
Peng Fan
2018-05-23
MLK-18243-1 arm: Kconfig: Add i.MX8MM Kconfig entry
Peng Fan
2018-05-23
MLK-18387 pmic: Add pmic driver for BD71837
Ye Li
2018-05-23
MLK-18384 imx8mq: Add mfgtool boot check
Ye Li
2018-05-23
MLK-18240 imx8qxb0: change the i.MX8QXPB0 NAND iomux settings
Han Xu
2018-05-23
MLK-18230 imx8qxp: Set back usdhc clock parent to PLL0 for B0
Ye Li
2018-05-23
MLK-18227 imx8qm/qxp: Enlarge the size for environment variables
Ye Li
[next]