summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-07ARM: tegra: configure Ethernet address on Tegra186Stephen Warren
On Tegra186, the bootloader which runs before U-Boot passes the Ethernet MAC address to U-Boot using device tree. Extract this value and write it to the environment, so that the Ethernet uclass picks it up and uses it for the built-in Ethernet device. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-07ARM: tegra: add SoC-level hook for board_late_init()Stephen Warren
Extend the Tegra186 implementation of board_late_init() to call a per-SoC "hook" function. This will allow SoC-specific (rather than Tegra-wide) functionality to be implemented without the core Tegra code needing to be aware of the details. While board186.c is currently only used for Tegra186, it should be applicable to any other future SoC, and perhaps its simple design could be back-ported to older SoCs in the future too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-07net: add driver for Synopsys Ethernet QoS deviceStephen Warren
This driver supports the Synopsys Designware Ethernet QoS (Quality of Service) a/k/a eqos IP block, which is a different design than the HW supported by the existing designware.c driver. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily, as explained in the source. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # V1 Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-07dt: net: add DWC EQoS bindingStephen Warren
The Synopsys DWC EQoS is a configurable Ethernet MAC/DMA IP block which supports multiple options for bus type, clocking and reset structure, and feature list. This patch imports the binding from the Linux kernel, including my V3 patch to extend the binding to cover the Tegra186, which is applied for next-20160912. So far, my changes have been acked by Lars Persson, the original author of the binding. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-06mx6sabresd: Make Ethernet functional againFabio Estevam
Since commit ce412b79e7255770 ("drivers: net: phy: atheros: add separate config for AR8031") ethernet does not work on mx6sabresd. This commit correctly assigns ar8031_config() as the configuration function for AR8031 in the same way as done in the Linux kernel. However, on mx6sabresd design we need some additional configuration, such as enabling the 125 MHz AR8031 output that needs to be done in the board file. This also aligns with the same method that the kernel performs the AR8031 fixup in arch/arm/mach-imx/mach-imx6q.c. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-05engicam: icorem6: Fix config filesJagan Teki
Config file names on MAINTAINERS and README in board/engicam/icorem6 seems to be wrong, hence fixed the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-11-05armv8: define get_ticks() for the ARMv8 Generic TimerAndre Przywara
For 64-bit ARM systems we provide just a timer_read_counter() implementation and rely on the generic non-uclass get_ticks() function in lib/time.c to call the former. However this function is actually not 64-bit safe, as it assumes a "long" to be 32-bit. Beside the fact that the resulting uint64_t isn't bigger than "long" on 64-bit architectures and thus combining two counters makes no sense, we get all kind of weird results when we try to OR in the high value shifted by _32_ bits. So let's avoid that function at all and provide a straight forward get_ticks() implementation for ARMv8, which also is in line with ARMv7. This fixes occasional immediate time-out expiration issues I see on the Pine64 board. The root cause of this needs to be investigated, but this fix looks like the right thing anyway. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-11-05doc: update README.arm64Andre Przywara
This file apparently hasn't seen an update in a while, so just sync it with reality. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-11-05tools: imximage: check return value when open the plugin filePeng Fan
Check return value when open the plugin file. Coverity report: ** CID 153926: Error handling issues (NEGATIVE_RETURNS) /tools/imximage.c: 542 in copy_plugin_code() ifd = open(plugin_file, O_RDONLY|O_BINARY); >>> CID 153926: Error handling issues (NEGATIVE_RETURNS) >>> "ifd" is passed to a parameter that cannot be negative. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Reported-by: Coverity (CID: 153926) Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-05image: Protect against overflow in unknown_msg()Simon Glass
Coverity complains that this can overflow. If we later increase the size of one of the strings in the table, it could happen. Adjust the code to protect against this. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 150964)
2016-11-05colibri_pxa270: drop lzma support for space reasonMarcel Ziswiler
As the upcoming driver model integration takes up some more precious flash space first make sure to drop expensive LZMA support. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-03Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2016-11-03dfu: align array in dfu_get_dev_type with enum dfu_device_typePatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2016-11-03cmd: dfu: Add error handling for board_usb_initMichal Simek
board_usb_init() can failed and error should be handled properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-02Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-10-31Prepare v2016.11-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-31README: fix typo candiate -> candidateJelle van der Waa
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
2016-10-31travis.yml: Add in uniphier as a job, modify aarch64 builds a bitTom Rini
- Add in system aarch64-linux-gnu toolchain - Now that all VMs will have aarch64 available, don't exclude them from other jobs but instead exclude them from the catch-all aarch64 build - Add JOB= to the Freescale/ARM build to be clear about what it does. - Add uniphier as a stand-alone job Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-31mkimage: Fix missing free() in show_valid_options()Simon Glass
The allocated memory should be freed. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 150963) Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31cmd: load: align cache flushChris Packham
Prevent cache misalignment message by ensuring that a whole cache line is flushed. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2016-10-31Fix spelling of "resetting".Vagrant Cascadian
Cover-Letter: Fixes several spelling errors for the words "resetting", "extended", "occur", and "multiple". Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-31Fix spelling of "extended".Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-31Fix spelling of "occur".Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Acked-by: Angelo Dureghello <angelo@sysam.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-31Fix spelling of "multiple".Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-31omap3logic: Fix Auto detect Logic PD ModelsAdam Ford
The autodetect feature doesn't allow users to specify the device tree. This fix will make it only autodetect if 'fdtimage' is not defined. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31OMAP3: omap3_logic: Add scripts to boot over network.Adam Ford
Not all networks have a DHCP server configured properly, so these scripts make it easier to boot in that scenario. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31OMAP3: omap3_logic: Remove LCD preboot infoAdam Ford
The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless. V2: Eliminiate erroneous newline. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31ti: common: board_detect: Return a valid empty string for un-initialized eepromNishanth Menon
Current logic for query of revision, board_name, config returns NULL. Users of these functions do a direct strncmp to compare. Unfortunately, as per conventions require two valid strings to compare against and the current implementation causes a crash when compared with NULL. We'd still like to maintain the simplistic usage of these APIs instead of redundant if (string) res=strncmp(fn(),"cmp",n); flowing all over the place. Hence, since the version, name and config is already pre-initialized with empty string, just dont check for invalid header in the first place and return the empty string to the caller. Reported-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Correct was'nt -> wasn't typo] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-31ti: common: board_detect: Setup initial default value for config as wellNishanth Menon
config should have been initialized along with others as defaults. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31ti: common: board_detect: Replace hardcoded value with macroNishanth Menon
We should have used TI_DEAD_EEPROM_MAGIC in the first place. Fixes: d3b98a9eb941 ("ti: common: dra7: Add standard access for board description EEPROM") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-31cosmetic: Fix indentation in READMEAlexander von Gernler
Signed-off-by: Alexander von Gernler <grunk@pestilenz.org>
2016-10-30rk3288: kconfig: remove duplicate definition of SPL_MMC_SUPPORTKever Yang
SPL_MMC_SUPPORT defined in rockchip top level Kconfig instead of inside rk3288 and default to disable if ROCKCHIP_SPL_BACK_TO_BROM defined. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-30rockchip: doc: add GPT partition layoutJacob Chen
A simple introduction. Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-30rockchip: use rockchip linux partitions layoutJacob Chen
Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30dts: rk3288: remove node in dmc which not need anymoreKever Yang
Since we implement the dram capacity auto detect, we don't need to set the channel number and sdram-channel in dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2016-10-30rk3288: sdram: auto-detect the capacityKever Yang
Add support for rk3288 dram capacity auto detect, support DDR3 and LPDDR3, DDR2 is not supported. The program will automatically detect: - channel number - rank number - column address number - row address number The dts file do not need to describe those info after apply this patch. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Simon Glass <sjg@chromium.org> Tested-by: Vagrant Cascadian <vagrant@debian.org> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2016-10-30rk3288: config change for enable dram capacity auto-detect.Kever Yang
Enable ROCKCHIP_SPL_BACK_TO_BROM and disable CONFIG_SPL_MMC_SUPPORT to save memory in order to enable add source code for dram capacity auto-detect. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30evb-rk3399: config: set emmc as default boot devKever Yang
rk3399 has two mmc dev controller: mmc 0: SD card; mmc 1: EMMC U-Boot will scan the mmc boot device configured by CONFIG_SYS_MMC_ENV_DEV, since evb has emmc on board, let's set the EMMC as default. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30rk3288: fix reg address for GRF_SOC_CON2Kever Yang
The GRF base address is missing, fix it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30rk3399: disable the clock multiplier support when SoC initKever Yang
The Clock Multiplier in rk3399 EMMC programmable clock generator is broken, we can remove its support from SoC GRF register. Without this patch, rk3399 emmc driver is not work after below patch applied: 6dffdbc mmc: sdhci: Add the programmable clock mode support Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30rockchip: rk3288: Move rockchip_get_cru() out of the driverSimon Glass
This function is called from outside the driver. It should be placed into common SoC code. Move it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30rockchip: rk3399: Move rockchip_get_cru() out of the driverSimon Glass
This function is called from outside the driver. It should be placed into common SoC code. Move it. Also rename the driver symbol to be more consistent with the other rockchip clock drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30rockchip: rk3036: Move rockchip_get_cru() out of the driverSimon Glass
This function is called from outside the driver. It should be placed into common SoC code. Move it. Also rename the driver symbol to be more consistent with the other rockchip clock drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-30clk: rk3399: fix rockchip_get_cruJacob Chen
clk_rk3399 is driver name, not device name Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-30rockchip: RK3288 needs fdt and initrd below 256M nowSandy Patterson
I am not sure why this limit is changing. But my kernel doesn't load when it's above 256. This was testing on the rock2 board. Signed-off-by: Sandy Patterson <apatterson@sightlogix.com> Updated commit subject: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-30Merge branch 'sun9i-a80-spl' of http://git.denx.de/u-boot-sunxiTom Rini
2016-10-30Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-10-30sunxi: Add support for Cubieboard4Chen-Yu Tsai
The Cubieboard4 is an A80 SoC based development board from Cubietech. This board has a UART port, 4 USB host ports, a USB 3.0 OTG connector, HDMI and VGA outputs, a micro SD slot, 8G eMMC flash, 2G DRAM, a WiFi/BT combo chip, headphone and microphone jacks, IR receiver, and GPIO headers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30tools: add mksunxiboot to tools-all targetStefan Brüns
mksunxiboot is useful outside of u-boot, it is e.g. used by sunxi-tools. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-30sunxi: Enable SPL support for A80 Optimus boardChen-Yu Tsai
The A80 Optimus Board was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, 2 USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 16G eMMC flash, 2G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [hdegoede@redhat.com: update existing Merrii_A80_Optimus_defconfig instead of adding a new defconfig] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-12 07:10:46 +0000