summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-25rockchip: rk322x: update TPL_TEXT_BASEKever Yang
The boot0 hook including the 4-byte TAG which is at the beginning of the TEXT_BASE, now we can use a aligned TEXT BASE. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rv1108: add ofdata_to_platdata() method for driverKever Yang
Parse of data in dedicated api instead of in probe(). The clk_set_rate() may be called before the clk driver is probed, after core support set default clock. This patch fix system abort issue since: f4fcba5 clk: implement clk_set_defaults() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25rockchip: rk3128: add ofdata_to_platdata() method for driverKever Yang
Parse of data in dedicated api instead of in probe(). The clk_set_rate() may be called before the clk driver is probed, after core support set default clock. This patch fix system abort issue since: f4fcba5 clk: implement clk_set_defaults() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25rockchip: rk3036: add ofdata_to_platdata() method for driverKever Yang
Parse of data in dedicated api instead of in probe(). The clk_set_rate() may be called before the clk driver is probed, after core support set default clock. This patch fix system abort issue since: f4fcba5 clk: implement clk_set_defaults() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25config: evb-rk3399: enable make uboot.itbPeter Robinson
Similar to firefly 3399 enable the ability to create a FIT image with combined arm-trusted-firmware. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25arm: rockchip: make_fit_atf: remove unneeded importsPatrick Uiterwijk
These imports are entirely unused in the entire script. Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: use DM timer instead of rk_timerKever Yang
Disable rk_timer as SYS timer and use DM timer instead, so that we can get a better timer framework, the rk_timer is going to be clean after we conver to use DM timer or ARM arch/generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: add timer3 nodeKever Yang
Add dts node for timer3. Because of the rockchip timer can only KNOWN "dtd_rockchip_rk3368_timer" with OF_PLATDATA enable, so we override its compatible to "rockchip,rk3368-timer". Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: add -u-boot.dtsi for rock-rk3188Kever Yang
We should a -u-boot.dtsi for those config need by U-Boot only, and other part sync with kernel. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: timer: add compatible strings for rk3188 and rk3288Philipp Tomsich
The DM driver for ockchip timer blocks is also applicable to the RK3188 and RK3288 timer blocks: add 'rockchip,rk3188-timer' and 'rockchip,rk3288-timer' to its compatible list to support devices claiming compatibility with these. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: defconfig: puma-rk3399: enable RTCKlaus Goger
commit: 52280315a4 ("rtc: rewrite isl1208 to support DM") enables us to use the on-module RTC emulation with the rk3399 device model i2c driver. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3288: provide ${fdtfile}Heinrich Schuchardt
All rk3288 default configs define CONFIG_DEFAULT_DEVICE_TREE. So we can use it to define ${fdtfile} in rk3288_common.h. This variable is needed by the distro boot command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSICWadim Egorov
The generic ehci-driver (ehci-generic.c) will try to enable the clocks listed in the DTSI. If this fails (e.g. due to clk_enable not being implemented in a driver and -ENOSYS being returned by the clk-uclass), the driver will bail our and print an error message. This implements a minimal clk_enable for the RK3288 and supports the clocks mandatory for the EHCI controllers; as these are enabled by default we simply return success. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-24Merge git://git.denx.de/u-boot-videoTom Rini
2018-04-24video-uclass: Fix logical-not-parentheses warningTom Rini
With clang-4.0 and later we see: warning: logical not is only applied to the left hand side of this bitwise operator [-Wlogical-not-parentheses] if ((!gd->flags & GD_FLG_RELOC)) ^ ~ And while the compiler suggests adding parenthesis around gd->flags, a reading of the code says that we want to know when GD_FLG_RELOC is not set and then return. Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-23Merge tag 'signed-efi-2018.05' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-04-23 Some last minute fixes for 2018.05. Most of them are minor fixes. On top we have some functional improvements for the device path logic which should also help us be more compatible.
2018-04-23mmc: Staticize sd_select_bus_widthMarek Vasut
Staticize the function since it's only used in mmc.c . Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-23efi_selftest: test EFI_DEVICE_PATH_UTILITIES_PROTOCOLHeinrich Schuchardt
Provide unit tests for the EFI_DEVICE_PATH_UTILITIES_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: complete EFI_DEVICE_PATH_UTILITIES_PROTOCOLHeinrich Schuchardt
The missing services of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL are implemented. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: correcty determine total device path lengthHeinrich Schuchardt
Device paths may consist of multiple instances. Up to now we have only considered the size of the first instance. For the services of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL in most cases the total length of the device path is relevant. So let's rename efi_dp_size() to efi_dp_instance_size() and create a new function efi_dp_size() that calculates the total device path length. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: correctly determine length of empty device pathHeinrich Schuchardt
efi_dp_size() is meant to return the device path length without the end node. The length of a device path containing only an end node was incorrectly reported as 4. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: fix AppendDevicePathHeinrich Schuchardt
The logic of the AppendDevicePath service of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL is incorrectly implemented: * if both paths are NULL an end node has to be returned * if both paths are not NULL the end node of the second device path has to be kept Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: implement CreateDeviceNodeHeinrich Schuchardt
Implement the CreateDeviceNode service of the device path utility protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_selftest: fix typo in efi_selftest_devicepath.cHeinrich Schuchardt
%s/provice/provide/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_selftest: do not execute test if setup failedHeinrich Schuchardt
Executing a test after failed setup may lead to unexpected behavior like an illegal memory access. So after a setup failure we should skip to teardown. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23efi_loader: no support for ARMV7_NONSEC=yHeinrich Schuchardt
We do not support bootefi booting ARMv7 in non-secure mode. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23log: fix typo LOGL_EFIHeinrich Schuchardt
According to the documentation the EFI log category is called LOGC_EFI. All other categories start with LOGC_. So let's fix it. Fixes: 1973b381a1b3 ("log: add category LOGC_EFI") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23Merge git://git.denx.de/u-boot-uniphierTom Rini
2018-04-24ARM: uniphier: move SPL stack addressMasahiro Yamada
Currently, the address region, 0xf8000 - 0x100000, is used for SPL stack for the 32bit SoCs. Because the U-Boot proper image starts from 0x70000, the maximum size of the U-Boot proper image is 544KB (0x70000 - 0xf8000) for the NOR boot mode. Now uniphier_v7_defconfig is almost hitting this size limit. Changing CONFIG_SPL_STACK can raise the size limit with less impact. With this, the size limit will increase to 576KB (0x70000 - 0x100000). If we need to increase it even more, we would be able to change CONFIG_SYS_UBOOT_BASE at the cost of the flashing command changes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24ARM: uniphier: select a correct mmc device before flashing imagesMasahiro Yamada
Some boards support an SD card and an eMMC device at the same time. Since both belong to 'mmc', they are identified by a device number. When the device number of the eMMC is 1 instead 0, "mmc dev" command must be performed to switch the target device before flashing images. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24clk: uniphier: disable SPL_CLKMasahiro Yamada
The last clock consumer in SPL, SD/eMMC driver, gave up using the clock driver. The clock driver is only used in U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24ARM: dts: uniphier: drop u-boot, dm-pre-reloc from SD/eMMC clock nodeMasahiro Yamada
Now that the SD/eMMC driver does not use the clock driver in SPL, remove u-boot,dm-pre-reloc properties to let the fdtgrep tool drop the unnecessary nodes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24mmc: uniphier-sd: skip clock set-up for SPLMasahiro Yamada
The size of SPL is hitting the limit (64KB) for uniphier_v7_defconfig. When booting from SD/eMMC, obviously its clock has been properly set up by the boot ROM. Acutually, no need to re-initialize the clock in SPL. Using a clock driver would generalize the SoC specific code, but solving the memory footprint problem would win. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24mmc: tmio: move clk_enable() to each driver's probe functionMasahiro Yamada
I need to differentiate the clock handling for uniphier-sd. Move it to each driver's probe function from the tmio common code so that renesas-sdhi will not be affected. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24ARM: uniphier: increase CONFIG_SYS_MONITOR_LENMasahiro Yamada
With the recent changes, the size of the U-Boot proper image for uniphier_v7_defconfig exceeded the current limit, 512KB, then SPL fails to load the whole of the U-Boot proper. Increase the size. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-23Merge tag 'xilinx-for-v2018.05-rc3' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.05-rc3 - Fix nand initialization - Runtime ddr detection for static DDR setting - Enable rewriting env locations - Sync defconfig for zc770 xm011 - Remove useless ioremap in watchdog - Check return value from soc_clk_dump()
2018-04-23mmc: avoid division by zero in meson_mmc_config_clockHeinrich Schuchardt
The Odroid C2 fails to read from mmc with U-Boot v2018.03. The change avoids a division by zero. The fix was suggested by Jaehoon in https://lists.denx.de/pipermail/u-boot/2018-January/318577.html Reported-by: Vagrant Cascadian <vagrant@debian.org> Suggested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2018-04-23cmd: clk: Check return value from soc_clk_dumpMichal Simek
In case of error in soc_clk_dump function are returned different values then CMD return values (-1, 0, 1). For example: ZynqMP> clk dump exit not allowed from main input shel The patch is checking all negative return values and return CMD_RET_FAILURE which is proper reaction for these cases. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23watchdog: cadence: Remove useless ioremapMichal Simek
There is no need to call ioremap. Also reg pointer is completely unused in the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23arm: zynq: Sync zc770 xm011 defconfigsMichal Simek
x8 and x16 configurations should be in sync. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23arm: zynq: Make ENV_SIZE and ENV_OFFSET optional via board fileMichal Simek
Boards have an option to rewrite variable locations in their own board files. This is necessary for qspi and nand configurations where boot image can be bigger then 896k(current limit). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23arm: zynq: Wire automatic ddr detection for Zynq and ZynqMP caseMichal Simek
When static memory configuration is used U-Boot has capability to detect memory size in setup range. Enable this feature for static configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23arm: zynq: Enable setup board name for different boardsMichal Simek
There is no need to use zynq name as SYS_BOARD for all boards. The patch is adding an option to change it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23nand: zynq: Cleanup initializationEzequiel Garcia
CONFIG_NAND_ZYNQ selects CONFIG_SYS_NAND_SELF_INIT, so the driver doesn't have to play any ifdef game. Also, we can mark zynq_nand_init() as static and get rid of the mach-specific nand.h header. This is really a revert of: "mtd: zynq: nand: Move board_nand_init() function to board.c" (sha1: 310995d9f91ae56082b49be06fe8c3d01424f8f6) Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23nand: zynq: Fix driver initializationEzequiel Garcia
This driver is currently broken, refusing to initialize properly. The reason is that get_nand_dev_by_index() was being called before nand_register(), thus returning a pointer into uninitialized memory. In other words, the struct mtd_info used by the driver is total junk. Fix it by getting the correct struct mtd_info, via nand_to_mtd() on the driver's struct nand_chip. Tested on a custom board, where the CPU is halted without this patch. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-22Merge git://git.denx.de/u-boot-usbTom Rini
2018-04-22Merge git://git.denx.de/u-boot-shTom Rini
2018-04-21usb: dwc3-of-simple: fix error check of clk_get_bulk when disabledNeil Armstrong
The disabled clk API returns -ENOSYS unlike the reset API returning -ENOTSUPP. Fixes: ca7fdc8b1267 ("usb: host: Add simple of glue driver for DWC3 USB Controllers integration") Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-21usb: dwc3-of-simple: Add support for DRA7/AM57 platforms.Jean-Jacques Hiblot
Add the compatibility with "ti,dwc3" and enable it by default if DM_USB is enabled. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-21usb: dwc3-of-simple: Fix dependenciesJean-Jacques Hiblot
This simple glue layer does not require CONFIG_MISC, but it does require CONFIG_DM_USB. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-19 05:26:51 +0000