summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-09doc, spl, am335x: update am335x-networkHeiko Schocher
on the shc board we see when booting in net boot mode, that the ROM bootloader sends "AM335x ROM" as vendor-class-identifier. U-Boots doc says "DM814x ROM". So, add the info to the doc, that there is also "AM335x ROM" possible. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09armv7: omap-common: make SPL board_mmc_init() weakHeiko Schocher
make this function weak, so board code can setup in SPL MMC init with board special values. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09mmc: omap_hsmmc: enable 8bit interface for eMMC for AM33xxHeiko Schocher
Enable 8bit interface on HSMMC2 for am33xx to support 8bit eMMC chips. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09mmc: revert mmc: Handle switch error status bit in MMC card statusHeiko Schocher
revert patch: commit: 6b2221b008e0: mmc: Handle switch error status bit in MMC card status to get eMMC working on shc board Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09bootstage: call show_boot_progress also in SPLHeiko Schocher
show_boot_progress() is now called from SPL also. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09arm, am335x: Enable Spread Spectrum for the MPUHeiko Schocher
Enable Spread Spectrum for the MPU by calculating the required values and setting the registers accordingly. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09am335x: add some missing CM_CLKMODE_DPLL_SSC macrosHeiko Schocher
add missing CM_CLKMODE_DPLL_SSC_ACK_MASK, CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK and CM_CLKMODE_DPLL_SSC_TYPE_MASK defines. Used for enabling spread spectrum. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09arm, am335x: add some missing GPIO register definitionsHeiko Schocher
add missing: OMAP_GPIO_IRQSTATUS_SET_0 and OMAP_GPIO_IRQSTATUS_SET_1 registers. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09power, tps65217: add some definesHeiko Schocher
add the following defines, needed for the upcoming shc board support: Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09tests: py: disable main_signon check for printenv cmdHeiko Schocher
if CONFIG_VERSION_VARIABLE is set, the U-Boot environment contains a "vers" variable with the current U-Boot version string. If now "printenv" is called, test/py fails as it detects the main_sign string, which is in this case correct. So check only the main_sign as an error, if CONFIG_VERSION_VARIABLE is not set. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig optionHeiko Schocher
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-09tiny-printf: Correct the snprintf() implementationSimon Glass
This current code passes the variable arguments list to sprintf(). This is not correct. Fix it by calling _vprintf() directly. This makes firefly-rk3288 boot again. Fixes: abeb272 ("tiny-printf: Support snprintf()") Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-09ARM: uniphier: insert dsb barrier to ensure visibility of storeMasahiro Yamada
I noticed secondary CPUs sometimes fail to wake up, and the root cause is that the sev instruction wakes up slave CPUs before the preceding the register write is observed by them. The read-back of the accessed register does not guarantee the order. In order to ensure the order between the register write and the sev instruction, a dsb instruction should be executed prior to the sev. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09ARM: uniphier: do not erase when updating U-Boot image in eMMC deviceMasahiro Yamada
Unlike NAND, eMMC can be re-written without erasing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09ARM: uniphier: do not overwrite fdt_file environmentMasahiro Yamada
This code auto-detects the best-match FDT file name, but it should respect the user's choice if "fdt_file" environment is found in a saved set of environments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09ARM: uniphier: check return code of setenv()Masahiro Yamada
Because setenv() may fail, it is better to check its return code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09ARM: uniphier: fix boot mode for PH1-LD11Masahiro Yamada
This function is shared between PH1-LD11 and PH1-LD20. The difference is the boot-mode latch for the USB boot mode. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-09ARM: uniphier: support eMMC boot for PH1-LD11 and PH1-LD20Masahiro Yamada
The Boot ROM on PH1-LD11/LD20 exports built-in APIs to load images from an eMMC device. They are useful to reduce the memory footprint of SPL, rather than compiling the whole MMC framework. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-06Prepare v2016.07-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-06Merge http://git.denx.de/u-boot-samsungTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
2016-06-06ti_armv7_common: env: Fix hard coded mmc device for uuidB, Ravi
Avoid use of hard coded mmcdev value, use bootpart instead, so finduuid works based on bootpart set for a specific platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06arm/arm64: implement a boot header capabilityAndre Przywara
Some SPL loaders (like Allwinner's boot0, and Broadcom's boot0) require a header before the actual U-Boot binary to both check its validity and to find other data to load. Sometimes this header may only be a few bytes of information, and sometimes this might simply be space that needs to be reserved for a post-processing tool. Introduce a config option to allow assembler preprocessor commands to be inserted into the code at the appropriate location; typical assembler preprocessor commands might be: .space 1000 .word 0x12345678 Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Steve Rae <srae@broadcom.com> Commit Notes: Please note that the current code: start.S (arm64) and vectors.S (arm) already jumps over some portion of data already, so this option basically just increases the size of this region (and the resulting binary). For use with Allwinner's boot0 blob there is a tool called boot0img[1], which fills the header to allow booting A64 based boards. For the Pine64 we need a 1536 byte header (including the branch instruction) at the moment, so we add this to the defconfig. [1] https://github.com/apritzel/pine64/tree/master/tools END Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06lib: make strmhz available in SPLChris Packham
When setting up a DDR controller it is useful to be able to display frequencies in a readable form. Make the strmhz() function available in SPL builds provided there is full vsprintf available. Reviewed-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com>
2016-06-06Remove unneeded remnants of bcopy().Robert P. J. Day
Since bcopy() is no longer used, delete all remaining references to it. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-06-06configs: k2*_evm: Update fdt file namesLokesh Vutla
Now that all Keystone2 dts file names are changed in Linux kernel, reflect the same in evn variables inorder to find the right dtb file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-06ARM: DRA7xx: Enable FIT for hs platformsLokesh Vutla
Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-06armv7: fix order of OMAP die ID printingLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2016-06-06efi_loader: Add DM_VIDEO supportAlexander Graf
Some systems are starting to shift to support DM_VIDEO which exposes the frame buffer through a slightly different interface. This is a poor man's effort to support the dm video interface instead of the lcd one. We still only support a single display device. Signed-off-by: Alexander Graf <agraf@suse.de> [trini: Remove fb_size / fb_base as they were not used] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-06efi_loader: Don't allocate from memory holesAlexander Graf
When a payload calls our memory allocator with the exact address hint, we happily allocate memory from completely unpopulated regions. Payloads however expect this to only succeed if they would be allocating from free conventional memory. This patch makes the logic behind those checks a bit more obvious and ensures that we always allocate from known good free conventional memory regions if we want to allocate ram. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-06efi_loader: Move to normal debug infrastructureAlexander Graf
We introduced special "DEBUG_EFI" defines when the efi loader support was new. After giving it a bit of thought, turns out we really didn't have to - the normal #define DEBUG infrastructure works well enough for efi loader as well. So this patch switches to the common debug() and #define DEBUG way of printing debug information. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-06efi_loader: Add exit supportAlexander Graf
Some times you may want to exit an EFI payload again, for example to default boot into a PXE installation and decide that you would rather want to boot from the local disk instead. This patch adds exit functionality to the EFI implementation, allowing EFI payloads to exit. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-06arm: Introduce setjmp/longjmpAlexander Graf
To quit an EFI application we will need logic to jump to the caller of a function without returning from the function we called into, so we need setjmp/longjmp functionality. This patch introduces a trivial implementation of these that I verified works on armv7, thumb2 and aarch64. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-06strider: Support cpu-dp flavorDirk Eibach
There is new strider cpu flavor with DisplayPort video. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06strider: Support con-dp flavorDirk Eibach
There is a new strider console flavor with DisplayPort video. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06gdsys: osd: Allow osdsize on valid screens onlyDirk Eibach
Limit "osdsize"-command to access valid screens only. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06ioep-fpga: Support intempo compressionDirk Eibach
There is a new "intempo" compression type that can be reported on startup. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06Fix to davinci_nand.h to place CEnCFG registers at correctPeter Howard
Signed-off-by: Peter Howard <phoward@gme.net.au>
2016-06-06dm: scsi: if_typename should be scsiEd Swarthout
Fixes: => ext2ls scsi 0:1 ** Bad device scsi 0:1 ** for boards which use the scsi legacy driver (such as ls1043ardb). Signed-off-by: Ed Swarthout <Ed.Swarthout@nxp.com> Tested-by: George McCollister <george.mccollister@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-06Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
Modified: configs/ls1012afrdm_qspi_defconfig configs/ls1012aqds_qspi_defconfig configs/ls1012ardb_qspi_defconfig include/configs/ls1012afrdm.h include/configs/ls1012aqds.h include/configs/ls1012ardb.h Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-06Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-06-06ARM64: zynqmp: Extend malloc space before relocationMichal Simek
For boards which have more devices it is necessary to extend malloc space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06ARM64: zynqmp: Add support for standard distro boot commandsMichal Simek
Nand and QSPI are not defined now but this will be extended. Based on selected bootmode boot_targets are rewritten. Patch also contains detection if variables are saved. If yes don't rewrite boot_targets variable. Also move variable setup to the end of file because SCSI needs to be defined before others macros are using it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-06-06ARM64: zynqmp: Remove CONFIG_BOOTP_SERVERIPAlexander Graf
When the CONFIG_BOOTP_SERVERIP option is set, we ignore all dhcp values for the tftp server and use our own serverip and file name instead. This is usually not what we want and I doubt it's set for a good reason on ZynqMP. It definitely hurts if we want to support uEFI PXE boot on it. So just remove the option for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06ARM64: zynqmp: Enable AHCI when CONFIG_SATA_CEVA is definedMichal Simek
Simplify zcu102 board file by moving CONFIG_AHCI enabling to common file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06ARM64: zynqmp: Enable support for SPL FIT imagesMichal Simek
Enable support for RAM based FIT images read by SPL. Empty function for now to keep compiler happy. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06env: Setup GD_FLG_ENV_DEFAULT flag when default environment are usedMichal Simek
Setup flag when default environment are used to be able to rewrite default distro boot variables based on SoC boot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-06-06ARM64: zynq: Fix boot.bin generation for Zynq and ZynqMPMichal Simek
Fix boot.bin generation for Zynq and ZynqMP. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
2016-06-06ARM64: zynqmp: Extend page_table_sizeMichal Simek
0xc000 is not sufficient page table size if dc4 with 4 gems is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06ARM64: zynqmp: Add support for zc1751-dc4Michal Simek
zc1751-dc4 contains four GEMs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06ARM64: zynqmp: Add debug uart for zc1751-dc2Michal Simek
Add debug uart for zc1751-dc2. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-19 18:40:44 +0000