summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-09-12ENGR00218282 MX6Q: fix linker error when more configure enabled.Zhang Jiejing
2012-09-12ENGR00218067 mx6sl LDO_BYPASS: enable LDO BYPASS in mx6sl by defaultRobin Gong
2012-09-12ENGR00217764 MX6 Secure Boot : Fix NAND BOOT Failure due to secure patchEric Sun
2012-09-12ENGR00217381-02: show sd/mmc clk freq for mmcinfoRyan QIAN
2012-09-12ENGR00217381-01: mx6sl add sd1 and sd2 to support SD3.0Ryan QIAN
2012-09-12ENGR00217114-2 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun
2012-09-12ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun
2012-09-12ENGR00216852 MX6SL ARM2, UBoot : Apply V0.93 LPDDR2 ScriptEric Sun
2012-09-12ENGR00215197 pfuze MX6SL_ARM2: enable LDO bypass on u-bootRobin Gong
2012-09-12ENGR00215367 MX6 Platforms, remove "nosmp" in default parametersEric Sun
2012-09-12ENGR00215633 MX6DL LPDDR2 : enable plugin mode of system bootEric Sun
2012-09-12ENGR00215515 MX6: Move IPU QoS and VDOA/IPU/VPU AXI Cache config to kernelWayne Zou
2012-09-12ENGR00214947 MX6 UBOOT : default enable wait mode as default parametersEric Sun
2012-09-12ENGR00214866 MX6SL ARM2, UBoot : Apply V0.91 LPDDR2 ScriptEric Sun
2012-09-12ENGR00213689 - U-Boot: EPDC Splash Screen failing for MX 6DL/SDanny Nold
2012-09-12ENGR00212229 [MX6SL_ARM2]uboot: 8bit MMC cards failed to boot on SD1.Ryan QIAN
2012-09-12ENGR00212571 [MX6]Change DRAM ODT setting to save powerAnson Huang
2012-09-12ENGR00212287 - U-Boot EPDC splash screen: Disable EPDC splash by defaultDanny Nold
2012-09-12ENGR00211117 - U-Boot: Add EPDC splash screen for MX 6DL/S platformsDanny Nold
2012-09-12ENGR00211038 Fix the PAD_LVE implementationMahesh Mahadevan
2012-09-12ENGR00210918-2 cleanup android support, build pass all boardsZhang Jiejing
2012-09-12ENGR00210918-1 android: add mx6sl android supportZhang Jiejing
2012-09-12ENGR00209910 Add support for MX6SL mfgtools firmware supportFrank Li
2012-09-12ENGR00209899-2 MX6Q: cleanup: cleanup fastboot, udc warnning.Zhang Jiejing
2012-09-12ENGR00209899-1 mx6x: add generic gpio interface.Zhang Jiejing
2012-09-12ENGR00210014 i.mx6 : i.mx6sl : add PAD_CTL_LVE support for pad configurationEric Sun
2012-09-12ENGR00180103 MX6 sabreauto: Adjust IPU AXI-id0/1 Qos valueWayne Zou
2012-09-12ENGR00209306 i.mx6:i.mx6sl: fixup the load address for i.mx6sl uImageJason Liu
2012-09-12ENGR00209059 android: refine fastboot and recovery support.Zhang Jiejing
2012-09-12ENGR00182459 fastboot: change vid pid to align with winXP fastboot driver.Zhang Jiejing
2012-09-12ENGR00182739 sabresd I2C:add i2c recovery function in board_lateinitRobin Gong
2012-09-12ENGR00182426 MX6DL: add fastboot support for MX6DL.Zhang Jiejing
2012-09-12ENGR00182017 mx6dl sabresd I2C: fix build error and support mx6dl_sabresdRobin Gong
2012-09-12ENGR00181348 pfuze sabresd: pfuze support in u-bootRobin Gong
2012-09-12ENGR00181621 : MX6Solo SABREAI - Set default boot up to SD CardPrabhu Sundararaj
2012-09-12ENGR00181337-4 i.mx6 : i.mx6sl: Fix FEC RX CRC ErrorEric Sun
2012-09-12ENGR00181337-3 i.mx6: i.mx6sl: add initial support for i.mx6sl ARM2 boardEric Sun
2012-09-12ENGR00181337-2 i.mx6 : i.mx6sl arm2 add EPDC supportEric Sun
2012-09-12ENGR00181337-1 i.mx6 : add initial support for i.mx6slEric Sun
2012-09-12ENGR00180623 fastboot: add fastboot in MX6Q_SABERSD boardsZhang Jiejing
2012-09-12MX: Added definition file for MC13892Stefano Babic
2012-09-12IMX: uniform GPIO interface using GPIO frameworkStefano Babic
2012-09-12Add generic gpio.h in asm-genericSimon Glass
2012-09-12misc: pmic: fix regression in pmic_fsl.c (SPI)Helmut Raiger
2012-09-12misc: pmic: addI2C support to pmic_fsl driverStefano Babic
2012-09-12misc: pmic: use I2C_SET_BUS in pmic I2CStefano Babic
2012-09-12misc:pmic:core New generic PMIC driverƁukasz Majewski
2012-09-12MX: Added Freescale Power Management DriverStefano Babic
2012-09-12ENGR00179762: i.MX6: print the SOC revision correctlyJason Liu
2012-09-12ENGR00179000 i.mx6q/dl: sabresd: Add the splash screen supportJason Liu