summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-15omap: overo: Use 200MHz SDRC timings for revision 1, 2 & 3 boardsAsh Charles
Gumstix uses 200Mhz RAM on revision 1, 2 & 3 COMs, so use 200MHz timings rather than 165MHz. Based on 6cf8bf44b1f8550e12f7f2a16e01890e5de8443d Signed-off-by: Ash Charles <ashcharles@gmail.com>
2013-08-15omap: overo: update support for Micron 1GB POPSteve Sakoman
Signed-off-by: Ash Charles <ashcharles@gmail.com>
2013-08-15ARM: IGEP0033: Remove duplicate / unused #defines.Enric Balletbo i Serra
As config was originally based on am335x_evm.h we have also some duplicate / unnused #defines. Commit 15191c91 removed these #defines on various AM335x boards but not for IGEP COM AQUILA. This patch simply removes them for this board. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
2013-08-15ARM: IGEP0033: Add support to boot from NAND.Enric Balletbo i Serra
Add to the default environment the possibily to boot from NAND using a ubi rootfs. Also the partition scheme is set as follows: Start Size SPL : 0x00000000 0x00080000 (512KiB) U-Boot : 0x00080000 0x00100000 (1MiB) U-Boot Env : 0x00180000 0x00020000 (128KiB) File System : 0x001C0000 - The ubiboot script gets the kernel and the dtb file from the boot directory of the File System. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
2013-08-15ARM: IGEP0033: Remove CYGNUS name from header.Enric Balletbo i Serra
We will not use CYGNUS names for any IGEP COM based on AM335x processor, so, to avoid confusion, remove from headers. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
2013-08-15ARM: IGEP0033: Add support for Flattened Device Tree.Enric Balletbò i Serra
Now, the default kernel to boot the IGEP COM AQUILA is device tree based. As old kernel is deprecated we should adapt the boot commands to use DTB files. Also, with v3.9 and later of the Linux Kernel, uImage isn't builtable anymore by default, so we should switch to use the bootz command. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
2013-08-15ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTESTEnric Balletbo i Serra
After commit: 79cd2f814b1c75efd47161ac27f4cbebf768240f config_cmd_default.h: Remove CONFIG_CMD_MEMTEST It's not necessary to undef the CONFIG_CMD_MEMTEST, so we can remove it from configuration file. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
2013-08-15ARM: AM43xx: Add config fileLokesh Vutla
Add config file Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM43xx: Add build supportLokesh Vutla
Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: OMAP: Add CONFIG_OMAP_COMMONLokesh Vutla
Adding a new CONFIG_OMAP_COMMON which is included by all boards that needs to build cpu/armv7/omap-common folder. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM43xx: clocks: Add dpll and clock dataLokesh Vutla
Add dpll and clock data for AM43xx Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM43xx: Add header filesLokesh Vutla
Adding the following data: -> Prcm structure -> Base addresses -> Pin mux structure. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15ARM: AM43xx: Add Board filesLokesh Vutla
Add board specific information for AM43xx. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-08-15musb: Disable extra printsLokesh Vutla
There are many musb prints in SPL and U-Boot log. These prints are required only during musb debug. So replacing printk with pr_debug in musb_core. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-08-15ARM: AM33xx: Move s_init to a common placeHeiko Schocher
s_init has the same outline for all the AM33xx based board. So making it generic. This also helps in addition of new Soc with minimal changes. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-08-15ARM: AM33xx: Cleanup clocks layerLokesh Vutla
Cleaning up the clocks layer. This helps in addition of new Soc with minimal changes. This is derived from OMAP4 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-08-15ARM: AM33xx: Cleanup dplls dataLokesh Vutla
Locking sequence for all the dplls is same. In the current code same sequence is done repeatedly for each dpll. Instead have a generic function for locking dplls and pass dpll data to that function. This is derived from OMAP4 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2013-08-14Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2013-08-14include/fsl_usb.h: Cleanup license headerYork Sun
Replace license header with SPDX license identifier. Replace GPL-2.0 with GPL-2.0+. Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
2013-08-14powerpc/c29xpcie: add readme document for c29xpciePo Liu
Signed-off-by: Po Liu <Po.Liu@freescale.com>
2013-08-14powerpc/usb: Depricate usb_phy_type and usb_dr_mode uboot env variablesramneek mehresh
Remove getting values of usb mode and phy_type from "usb_dr_mode" and "usb_phy_type" uboot env variables. Now, these are determined only from hwconfig string Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-14fsl/usb: Move USB internal phy definitions to fsl_usb.hramneek mehresh
fsl_usb.h file created to share data bewteen usb platform code and usb ip driver. Internal phy structure definitions moved to this file Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-14powerpc/mpc85xx:Avoid hardcoded init for serdes block 1 & 2Prabhakar Kushwaha
It is not necessary for all processor to have serdes block 1 & 2. They may have only one serdes block. So, put serdes block 1 & 2 related code under defines Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-13tegra: Avoid using I2C prior to relocationSimon Glass
Tegra recently moved to the new I2C framework, which sets up I2C prior to relocation, and prior to calling i2c_init_board(). This causes a crash on Tegra boards. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-08-13Merge branch 'dcc' of git://www.denx.de/git/u-boot-microblazeTom Rini
2013-08-13Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2013-08-13Merge branch 'master' of git://www.denx.de/git/u-boot-mipsTom Rini
2013-08-13MIPS: bootm: drop obsolete Qemu specific bootm implementationDaniel Schwierzeck
The Qemu specific bootm implementation was intended for a special Qemu target in Linux kernel. But this target has been dropped in v2.6.25-rc1 by commit 302922e5f6901eb6f29c58539631f71b3d9746b8 Author: Ralf Baechle <ralf@linux-mips.org> Date: Tue Jan 29 10:15:02 2008 +0000 [MIPS] Qemu: Remove platform. The Qemu platform was originally implemented to have an easily supportable platform until Qemu reaches a state where it emulates a real world system. Since the latest release Qemu is capable of emulating the MIPSsim and Malta platforms, so this goal has been reached. The Qemu plaform is also rather underfeatured so less useful than a Malta emulation. Thus the special bootm implementation is obsolete by now and can be dropped. The Qemu support in U-Boot is going to be replaced by MIPS Malta board support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: add YAMON style Linux preparation/jump code for Qemu MaltaDaniel Schwierzeck
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: add support for generic relocation of init ramdisksDaniel Schwierzeck
All linux kernels after v2.6 require a page-aligned location of an external init ramdisk. Enable CONFIG_SYS_BOOT_RAMDISK_HIGH to support this with the generic U-Boot relocation code. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: refactor initialisation of kernel environmentDaniel Schwierzeck
Move initialisation of Linux environment to separate functions. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: refactor initialisation of kernel cmdlineDaniel Schwierzeck
Move initialisation of Linux command line to separate functions. Also add support for bootm subcommand 'cmdline'. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: add support for LMBDaniel Schwierzeck
This is required for init ramdisk relocation and device tree support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: optimize kernel entry callDaniel Schwierzeck
Fix signature of kernel entry function. Mark the kernel entry with __noreturn for better code optimisation. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: fix checkpatch.pl warningsDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13serial: arm_dcc: Register with serial coreJagannadha Sutradharudu Teki
Register arm_dcc with drivers/serial/serial.c Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-13serial: arm_dcc: Remove stdio structure supportJagannadha Sutradharudu Teki
Removed stdio structure ops support on arm_dcc driver, and need to register with serial core so-that it can access like remianing serial drivers. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-12Merge branch 'master' of git://www.denx.de/git/u-boot-videoTom Rini
2013-08-12powerpc/mpc85xx: Cleanup license header in source filesYork Sun
Fix the license header introduced by the following patches Add TWR-P10xx board support Add T4240EMU target IDT8T49N222A configuration code Add C29x SoC support Add support for C29XPCIE board Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-12edid: rename struct member to fix two EDID_* macrosChristian Gmeiner
Without this change EDID_DETAILED_TIMING_VSYNC_OFFSET and EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH macros can not be used (compile error). The fix is quite trivial: rename struct member to the expected name. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2013-08-12exynos: video: change mipi dsi write function parameters correctlyDonghwa Lee
This patch have changed mipi dsi write functions' parameters correctly so that type cast operations were removed. And mipi dsi payload is composed with array of panel commands to improve readability. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
2013-08-12video: Add small 4x6 font from LinuxMarek Vasut
This font is based on Linux drivers/video/console/font_mini_4x6.c as of commit: commit bcfbeecea11c15e243f076d37d637c2598aff4fe Author: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> Date: Sun Aug 12 15:05:10 2012 +0000 drivers: console: font_: Change a glyph from "broken bar" to "vertical line" I removed these lines as they are useless in U-Boot: #include <linux/font.h> #define FONTDATAMAX 1536 Whole "const struct font_desc font_mini_4x6" block This patch also adds a new configuration option to select this smaller font, CONFIG_VIDEO_FONT_4X6 , but this is disabled by default. The default setting is the regular "large" font. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
2013-08-12video: Encapsulate font in video_font_data.hMarek Vasut
This patch moves all the font configuration values into video_font_data.h so they are all in the right place with the font. The video_font.h now only includes video_font_data.h and will allow us to select and include different font once more fonts are added. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [agust: fixed build warning for mcc200] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-12mpc5200: Misc updates to a3m071 config headerStefan Roese
This patch changes some features of the a3m071/a4m2k board support: - Add bootcounter support - Update MTD env default to correct values - Add mtdparts to bootargs for mtd partitioning via kernel cmdline - Added some default env variables for easy updating (kernel, dtb) - Change README to the updated flash locations Signed-off-by: Stefan Roese <sr@denx.de>
2013-08-12Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblazeTom Rini
2013-08-12Merge branch 'master' of git://git.denx.de/u-boot-fdtTom Rini
2013-08-12Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2013-08-12fpga: zynqpl: Clear loopback mode during device initSoren Brinkmann
Some versions of the Zynq first stage boot loader enable PCAP loopback during boot regardless of whether or not the boot image includes PL configuration. This behavior only appears in certain boot modes (notably QSPI boot). Attempting to configure the PL with the loopback bit set will result in timeouts and will prevent successful configuration. In order to avoid this problem, and to avoid dependency on the version of the FSBL used to boot the system, ensure that the loopback enable bit is cleared when loading the driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-12fpga: zynqpl: Add support for zc7100 device.Michal Simek
- Add support for zc7100 device. - FPGA programming on few of the SOC(zc7100) takes more than 1sec, hence increased the program time by 4sec to sync' all soc's. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-10libfdt: SPDX-License-Identifier: GPL-2.0+ BSD-2-ClauseRoger Meier
Signed-off-by: Roger Meier <roger@bufferoverflow.ch> Acked-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 04:44:48 +0000