summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-18sandbox: Add "host size" hostfs command for fs testStefan Brüns
This complements the size/fatsize/ext4size commands added in commit cf6598193aed5de8855eaf70c1994f2bc437255a load, save and ls are already implemented for hostfs, now tests can cover the same operations on hostfs and emulated block devices. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-18sandbox: document support of block device emulationStefan Brüns
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org> Changed 'Sandbox' to 'sandbox' in subject: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-09-18Merge branch 'master' of git://www.denx.de/git/u-boot-sunxiTom Rini
2016-09-18Merge branch 'master' of git://www.denx.de/git/u-boot-arcTom Rini
2016-09-19ARM: uniphier: update DRAM init code for LD20 SoCMasahiro Yamada
Import the latest version from the Diag software. - Support LD21 SoC (including DDR chips in the package) - Per-board granule adjustment for both reference and TV boards - Misc cleanups Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-19ARM: uniphier: add PLL init code for LD20 SoCMasahiro Yamada
Initialize the DPLL (PLL for DRAM) in SPL, and others in U-Boot proper. Split the common code into pll-base-ld20.c for easier re-use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-19ARM: uniphier: collect clock/PLL init code into a single directoryMasahiro Yamada
Now PLLs for DRAM controller are initialized in SPL, and the others in U-Boot proper. Setting up all of them in a single directory will be helpful when we want to share code between SPL and U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-19ARM: uniphier: move PLL init code to U-Boot proper where possibleMasahiro Yamada
The PLL for the DRAM interface must be initialized in SPL, but the others can be delayed until U-Boot proper. Move them from SPL to U-Boot proper to save the precious SPL memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: rename CONFIG_DPLL_SSC_RATE_1PERMasahiro Yamada
Basically, this should not be configured by users. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: move XIRQ pin-mux settings of LD11/LD20Masahiro Yamada
This is the last code in the mach-uniphier/pinctrl/ directory. Push the remaining code out to delete the directory entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: consolidate System Bus pin-mux settings for LD11/LD20Masahiro Yamada
Use the pin-mux data in the pinctrl drivers by directly calling pinctrl_generic_set_state(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: dts: uniphier: include System Bus pin group node in SPL DTMasahiro Yamada
This will be needed for setting up the System Bus pin-mux via the LD11/LD20 pinctrl driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: consolidate NAND pin-mux settingsMasahiro Yamada
The NAND subsystem has not supported the Driver Model yet, but the NAND pin-mux data are already in the pinctrl drivers. Use them by calling pinctrl_generic_set_state() directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: remove ad-hoc pin-mux code for sLD3Masahiro Yamada
These settings are nicely cared by the pinctrl driver now. Remove. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: remove redundant pin-muxing for EA24 pin of sLD3 SoCMasahiro Yamada
This is enabled by default for all the supported boot modes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: uniphier: select PINCTRL and SPL_PINCTRLMasahiro Yamada
Now all UniPhier SoCs support a pinctrl driver. Select (SPL_)PINCTRL since it is mandatory even for base use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18ARM: dts: uniphier: add pinctrl device node and pinctrl propertiesMasahiro Yamada
DT-side updates to make pinctrl on sLD3 SoC really available. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18pinctrl: uniphier: add UniPhier sLD3 pinctrl driverMasahiro Yamada
Add pin-mux support for UniPhier sLD3 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18pinctrl: uniphier: support 4bit-width pin-mux register capabilityMasahiro Yamada
On LD4 SoC or later, the pin-mux registers are 8bit wide, while 4bit wide on sLD3 SoC. Support it for the sLD3 pinctrl driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18sunxi: Enable USB gadget support for Sinlinx SinA33Chen-Yu Tsai
Sinlinx SinA33 has a USB OTG port, but VBUS is controlled manually from a jumper pad. Enable OTG in gadget mode, as well as the download gadget and related functions. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-18sunxi: Enable USB host support for Sinlinx SinA33Chen-Yu Tsai
Sinlinx SinA33 has 1 USB host port. Enable EHCI_HCD support for it. Also enable USB mass storage support so we can access USB sticks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-18sunxi: Add mmc0 card detect pin for Sinlinx SinA33Chen-Yu Tsai
Sinlinx SinA33 uses PB4 for mmc0 card detect. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-18sunxi: Add defconfig and dts for the NanoPi NEOJelle van der Waa
The NanoPi NEO is a simple h3 board with 512MB RAM, ethernet, one usb and one usb OTG connector. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-18sunxi: musb: Re-init musb controller on repeated probe callsHans de Goede
With sunxi-musb musb_lowlevel_init() can fail when a charger; or no cable is plugged into the otg port. To avoid leaking the struct musb allocated by musb_init_controller() on repeated musb_usb_probe() calls, we were caching its result. But musb_init_controller() does more, such as calling sunxi_musb_init() which enables the clocks. Not calling sunxi_musb_init() causes the musb controller to stop working after a "usb reset" since that calls musb_usb_remove() which disables the clocks. This commit fixes this by removing the caching of the struct returned from musb_init_controller(), it replaces this by free-ing the allocated memory in musb_usb_remove() and calling musb_usb_remove() on musb_usb_probe() errors to ensure proper cleanup. While at it also make musb_usb_probe() and musb_usb_remove() static. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-17sunxi: musb: Power off OTG port VBUS when disabledChen-Yu Tsai
The Linux kernel musb driver expects VBUS to be off while initializing musb. Having it on results in a repeating string of warnings, followed by an unusable peripheral. The peripheral is only usable after physically removing the OTG adapter, letting musb reset its state. This partially reverts commit c9f8947e6604 ("sunxi: usb-phy: Never power off the usb ports") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-17sunxi: axp2xx: disable ldoio0/1 at bootHans de Goede
When cold-booting the ldoio0/1 regulators are always off / the gpios are always at tristate. But when re-booting from android these are sometimes on. Disable them at axp_init time (iow as early as possible) to remove this difference between a cold boot and a reboot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-09-16Makefile: Give a build error if ad-hoc CONFIG options are addedSimon Glass
New CONFIG options should be added via Kconfig. To help prevent new ad-hoc CONFIGs from being added, give a build error when these are detected. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-09-16Kconfig: Add a whitelist of ad-hoc CONFIG optionsSimon Glass
Add a list of ad-hoc CONFIG options that don't use Kconfig. This can be used to check that new ones are not being added. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_YMODEM_SUPPORT to KconfigSimon Glass
Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_WATCHDOG_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_USB_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_USB_HOST_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_USBETH_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_SPI_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_SPI_FLASH_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_SERIAL_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_SATA_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_POWER_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Remove CONFIG_SPL_PINCTRL_SUPPORTSimon Glass
This option is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_ONENAND_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_NOR_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_NET_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_NET_VCI_STRING to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPL_NET_VCI_STRING Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_NAND_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MUSB_NEW_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MTD_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MMC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBGENERIC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 17:53:10 +0000