Age | Commit message (Expand) | Author |
2012-09-24 | mx6q_sabrelite: toggle PHY reset for Nitrogen6X | Eric Nelson |
2012-09-12 | ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' name | Terry Lv |
2012-09-12 | ENGR00221135: imx6x: clear PowerDown Enable bit of WDOG1_WMCR | Robby Cai |
2012-09-12 | ENGR00221150 Support spi-nor on manufacturing tool | Alejandro Sierra |
2012-09-12 | ENGR00220824: mx6sl_evk: mmc: only SD1 supports 8bit on evk board. | Ryan QIAN |
2012-09-12 | ENGR00180538-1 MFG download burn sd,spi, nand, nor failed. | Francisco Munoz |
2012-09-12 | ENGR00217505-8 uboot: MX6Q-ARD: set the default gpmi clock to 20MHz | Huang Shijie |
2012-09-12 | ENGR00217505-7 uboot: gpmi: update the mtd->ecc_stats when reading page failed | Huang Shijie |
2012-09-12 | ENGR00217505-6 uboot: gpmi: set default value for busy_timeout | Huang Shijie |
2012-09-12 | ENGR00217505-5 uboot: gpmi: update the ecc_strength code | Huang Shijie |
2012-09-12 | ENGR00217505-4 uboot: gpmi: replace the gpmi_nfc_reset_block() | Huang Shijie |
2012-09-12 | ENGR00217505-3 uboot: gpmi: use the community's nand chip database | Huang Shijie |
2012-09-12 | ENGR00217505-2 uboot: mtd: update nand_get_flash_type() | Huang Shijie |
2012-09-12 | ENGR00217505-1 uboot: MX6Q-ARD: add a NAND boot config | Huang Shijie |
2012-09-12 | ENGR00220486 Modify ODT values for Solo AI | Alejandro Sierra |
2012-09-12 | ENGR00220161: imx6sl: Add MX6SL EVK Support | Robby Cai |
2012-09-12 | ENGR00220164 pfuze:rise VDDARM_IN to 1.425V and work around pfuze1.0 | Robin Gong |
2012-09-12 | ENGR00220076 fix the fastboot usb re-connect issue | LiGang |
2012-09-12 | ENGR00219854-1 Enable fastboot feature on mx6q-arm2 board | LiGang |
2012-09-12 | ENGR00219636 MX6 UBOOT : Enlarge command line buffer size | Eric Sun |
2012-09-12 | ENGR00218915-2 MX6 SabreSD:Use new 8bit bmp boot logo | Liu Ying |
2012-09-12 | ENGR00218915-1 FSL common:Add new boot logo | Liu Ying |
2012-09-12 | ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authentication | Eric Sun |
2012-09-12 | ENGR00218583-5 MX6DL SabreSD Android:Add splashimage uboot var | Liu Ying |
2012-09-12 | ENGR00218583-4 MX6Q SabreSD Android:Add splashimage uboot var | Liu Ying |
2012-09-12 | ENGR00218583-3 MX6DL SabreSD:Enable splashimage by default | Liu Ying |
2012-09-12 | ENGR00218583-2 MX6Q SabreSD:Enable splashimage by default | Liu Ying |
2012-09-12 | ENGR00218583-1 MX6Q/DL SabreSD:Support LVDS1 splashimage | Liu Ying |
2012-09-12 | ENGR00218805 imx6: print the silicon revision correctly | Jason Liu |
2012-09-12 | ENGR00218465 Android: mx6sl-arm2: fix fastboot crash issue | LiGang |
2012-09-12 | ENGR00217401 common: fix build warning | Xinyu Chen |
2012-09-12 | ENGR00218282 MX6Q: fix linker error when more configure enabled. | Zhang Jiejing |
2012-09-12 | ENGR00218067 mx6sl LDO_BYPASS: enable LDO BYPASS in mx6sl by default | Robin Gong |
2012-09-12 | ENGR00217764 MX6 Secure Boot : Fix NAND BOOT Failure due to secure patch | Eric Sun |
2012-09-12 | ENGR00217381-02: show sd/mmc clk freq for mmcinfo | Ryan QIAN |
2012-09-12 | ENGR00217381-01: mx6sl add sd1 and sd2 to support SD3.0 | Ryan QIAN |
2012-09-12 | ENGR00217114-2 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SL | Eric Sun |
2012-09-12 | ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SL | Eric Sun |
2012-09-12 | ENGR00216852 MX6SL ARM2, UBoot : Apply V0.93 LPDDR2 Script | Eric Sun |
2012-09-12 | ENGR00215197 pfuze MX6SL_ARM2: enable LDO bypass on u-boot | Robin Gong |
2012-09-12 | ENGR00215367 MX6 Platforms, remove "nosmp" in default parameters | Eric Sun |
2012-09-12 | ENGR00215633 MX6DL LPDDR2 : enable plugin mode of system boot | Eric Sun |
2012-09-12 | ENGR00215515 MX6: Move IPU QoS and VDOA/IPU/VPU AXI Cache config to kernel | Wayne Zou |
2012-09-12 | ENGR00214947 MX6 UBOOT : default enable wait mode as default parameters | Eric Sun |
2012-09-12 | ENGR00214866 MX6SL ARM2, UBoot : Apply V0.91 LPDDR2 Script | Eric Sun |
2012-09-12 | ENGR00213689 - U-Boot: EPDC Splash Screen failing for MX 6DL/S | Danny Nold |
2012-09-12 | ENGR00212229 [MX6SL_ARM2]uboot: 8bit MMC cards failed to boot on SD1. | Ryan QIAN |
2012-09-12 | ENGR00212571 [MX6]Change DRAM ODT setting to save power | Anson Huang |
2012-09-12 | ENGR00212287 - U-Boot EPDC splash screen: Disable EPDC splash by default | Danny Nold |
2012-09-12 | ENGR00211117 - U-Boot: Add EPDC splash screen for MX 6DL/S platforms | Danny Nold |