summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-02Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-08-02MAINTAINERS, git-mailrc: Update the mmc maintainerJaehoon Chung
Update the mmc maintainer from Pantelis to me. Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-02ARM64: zynqmp: Do not enable DM_MMC by defaultMichal Simek
The patch: "dm: mmc: zynq: Convert zynq to use driver model for MMC" (sha1: 329a449f2c289b4de8f892fca1d9379ce5fd81b8) added dependency on enabling some MMC options by default. There are minimal ZynqMP configurations which require only minimal configurations to be enabled to keep u-boot size as lower as possible. Move options to defconfig instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-02ARM64: zynqmp: Fix stack pointer initializationSoren Brinkmann
This partly reverts commit: "ARM64: zynqmp: Add SPL support support" (sha1: e6a9ed04e78cf87ec97e306fa4e7a1669ef98df6) Stack can rewrite ATF code. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-02ARM64: zynqmp: Define config USB_STORAGE through defconfigMichal Simek
Define config USB_STORAGE through defconfig for all Xilinx ZynqMP boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-02xilinx: Sync defconfigs with the latest Kconfig layoutMichal Simek
Update Microblaze, Zynq and ZynqMP defconfigs to reflect latest Kconfig changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-02ARM64: zynqmp: Wire up PSCI resetMichal Simek
Using PSCI to reset the system. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-01ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodesMichal Simek
Serial driver is getting clk information via DT that's why also clk node needs to have this flag. Different behavior was introduced by: "dm: Use dm_scan_fdt_dev() directly where possible" (sha1: 911954859d6dece49c3e4835faea004cfe392506) where simple-bus driver starts to call dm_scan_fdt_dev() which has additional logic around pre_reloc_only parameter which exclude clk nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-31Drop references to MAKEALL in the documentationSimon Glass
It is confusing to mention MAKEALL when it is not the normal way of building U-Boot anymore. Update the documentation to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31Drop the MAKEALL toolSimon Glass
Buildman has been around for 3 years now. It has had a lot of use and testing. Perhaps it is time to remove MAKEALL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31buildman: Add a quick-start noteSimon Glass
For those who just want to build a board, it is useful to see a quick hint right at the start of the documentation. Add a few commands showing how to download toolchains and build a board. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-31buildman: Avoid overwriting existing toolchain entriesSimon Glass
The current code for setting up the toolchain config always writes the new paths to an item called 'toolchain'. This means that it will overwrite any existing toolchain item with the same name. In practice, this means that: buildman --fetch-arch all will fetch all toolchains, but only the path of the final one will be added to the config. This normally works out OK, since most toolchains are the same version (e.g. gcc 4.9) and will be found on the same path. But it is not correct and toolchains for archs which don't use the same version will not function as expected. Adjust the code to use a complete glob of the toolchain path. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31buildman: Drop the toolchain error when downloading toolchainsSimon Glass
It doesn't make sense to complain about missing toolchains when the --fetch-arch option is being used. The user is presumably aware that there is a toolchain problem and is actively correcting it by running with this option. Refactor the code to avoid printing this confusing message. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-31buildman: Fix a typo in TestSettingsHasPath()Simon Glass
The function comment should say 'buildman'. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31buildman: Improve the toolchain progress/error outputSimon Glass
Use colour to make it easier to see what is going on. Also print a message before downloading a new toolchain. Mention --fetch-arch in the message that is shown when there are no available toolchains, since this is the quickest way to resolve the problem. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31buildman: Allow the toolchain error to be suppressedSimon Glass
When there are no toolchains a warning is printed. But in some cases this is confusing, such as when the user is fetching new toolchains. Adjust the function to supress the warning in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-31buildman: Fix the 'help' test to use the correct pathSimon Glass
When buildman is run via a symlink, this test fails. Fix it to work the same way as buildman itself. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-31buildman: Automatically create a config file if neededSimon Glass
If there is no ~/.buildman file, buildman currently complains and exists. To make things a little more friendly, create an empty one automatically. This will not allow things to be built, but --fetch-arch can be used to handle that. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31buildman: Tidy up the README a littleSimon Glass
Tidy up some problems found by a recent review. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31libfdt: Introduce new ARCH_FIXUP_FDT optionMichal Simek
Add new Kconfig option to disable arch_fixup_fdt() calls for cases where U-Boot shouldn't update memory setup in DTB file. One example of usage of this option is to boot OS with different memory setup than U-Boot use. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-07-31sunxi: Re-enable h3 emac supportHans de Goede
With the recent bug fixes for the sun8i_emac driver all known issues are resolved, so we can re-enable the driver. While at it, also enable the emac on the Orange Pi One. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Jagan Teki <jteki@openedev.com>
2016-07-31net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffersHans de Goede
This fixes the following CACHE warnings when using sun8i_emac: => dhcp BOOTP broadcast 1 BOOTP broadcast 2 CACHE: Misaligned operation at range [7bf594a8, 7bf59628] BOOTP broadcast 3 CACHE: Misaligned operation at range [7bf59c90, 7bf59e10] CACHE: Misaligned operation at range [7bf5a478, 7bf5a5f8] DHCP client bound to address 10.42.43.80 (1009 ms) Note this commit also changes the max rx size from 2024 to 2044, matching what the kernel driver uses. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-31sunxi: On newer SoCs use words 1-3 instead of just word 3 from the SIDHans de Goede
It seems that bytes 13-14 of the SID / bytes 1-2 from word 3 of the SID are always 0 on H3 making it a poor candidate to use as source for the serialnr / mac-address, and the other non constant words (1 and 2) also have quite a few bits which are the same for some boards, This commits switches to using the crc32 of words 1 - 3 to get a more unique value for the mac-address / serialnr. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-31sunxi: Ensure that the NIC specific bytes of the mac are not all 0Hans de Goede
On 2 of my H3 boards bytes 13-15 of the SID are all 0 leading to the NIC specific bytes of the mac all being 0, which leads to the boards not getting an ipv6 address from the dhcp server. This commits adds a check to ensure this does not happen. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-31sunxi: Hummingbird_A31_defconfig: Drop MACPWR optionChen-Yu Tsai
MACPWR was used to bring the Ethernet PHY out of reset. The designware driver now supports the phy reset gpio binding, so this is no longer needed. In fact in requesting the same GPIO, it makes the designware driver fail to probe. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-31sunxi: gpio: Add .xlate function for gpio phandle resolutionChen-Yu Tsai
sunxi uses a 2 cell phandle for gpio bindings. Also there are no seperate nodes for each pin bank. Add a custom .xlate function to map gpio phandles to the correct pin bank device. This fixes gpio_request_by_name usage. Fixes: 7aa974858422 ("dm: sunxi: Modify the GPIO driver to support driver model") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-31rockchip: add support for rk3288 PopMetal boardjk.kernel@gmail.com
PopMetal is a rockchip rk3288 based board made by ChipSpark, which has many interface such as HDMI, VGA, USB, micro-SD card, WiFi, Audio and Gigabit Ethernet. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31rockchip: add basic support for fennec-rk3288 boardjk.kernel@gmail.com
Fennec is a RK3288-based development board with 2 USB ports, HDMI, micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provides access to display pins, I2C, SPI, UART and GPIOs. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31rockchip: rk3288: move evb board to rockchip folderjk.kernel@gmail.com
The 'evb-rk3288' is not a vendor name, change it to 'rockchip' which is the real vendor name. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31rockchip: rk3288: revise CONFIG_FASTBOOT_BUF_ADDRjk.kernel@gmail.com
CONFIG_SYS_LOAD_ADDR is absolutely safe to store image for fastboot. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31rockchip: remove the duplicated macro configjk.kernel@gmail.com
CONFIG_DOS_PARTITION and CONFIG_EFI_PARTITION are already included in config_distro_defaults.h, and we don't need them in SPL stage. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31rockchip: rk3288: disable fastboot in SPL stagejk.kernel@gmail.com
Reduce compilation time for SPL. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31Revert "rockchip: Move the MMC setup check earlier"jk.kernel@gmail.com
Boot Rom wouldn't initialize sdmmc while booting from eMMC. We need to setup sdmmc gpio, otherwise we will hit an error below: =>mmc info blk_get_device: if_type=6, devnum=0: dwmmc@ff0c0000.blk, 6, 0 uclass_find_device_by_seq: 0 -1 uclass_find_device_by_seq: 0 0 - -1 -1 - -1 0 - found uclass_find_device_by_seq: 0 1 - -1 -1 - -1 0 - not found fdtdec_get_int_array: interrupts get_prop_check_min_len: interrupts Buswidth = 1, clock: 0 Buswidth = 1, clock: 400000 Sending CMD0 dwmci_send_cmd: Timeout on data busy dwmci_send_cmd: Timeout on data busy dwmci_send_cmd: Timeout on data busy dwmci_send_cmd: Timeout on data busy This reverts commit 6efeeea79c880d3dd262e0dca9da2687f0ab68c9. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-07-31cosmetic: rockchip: rk3288: pinctrl: fix config symbol namingjk.kernel@gmail.com
Revise config to CONFIG_ROCKCHIP_RK3288_PINCTRL. Signed-off-by: Ziyuan Xu <jk.kernel@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
2016-07-31rockchip: add a dummy byte for the sdram-channel propertyjk.kernel@gmail.com
Add an extra byte so that this data is not byteswapped. Signed-off-by: Ziyuan Xu <jk.kernel@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
2016-07-31rockchip: rk3288: Fix pinctrl for GPIO bank 0John Keeping
Bank 0 is the "PMU GPIO" bank which is controlled by the PMU registers rather than the GRF registers. In the GRF the top half of the register is used as a mask so that some bits can be updated without affecting the others, but in the PMU this feature is not provided and the top half of the register is reserved. Take the same approach as the Linux driver to update the value via read-modify-write but setting the mask for only the bits that have changed. The PMU registers ignore the top 16 bits so this works for both GRF and PMU iomux registers. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-07-31rk3399: Reserve space for ARM Trust FirmwareKever Yang
RK3399 needs reserve 0x200000 at the beginning of DRAM, for ATF bl31. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31rockchip: rk3036: update MAINTAINER fileXu Ziyuan
Update MAINTAINER files for kylin_rk3036, evb_rk3036. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31configs: rockchip: remove no use MACROKever Yang
The CONFIG_ROCKCHIP_COMMON and CONFIG_SPL_ROCKCHIP_COMMON are no use now, remove them. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31mmc-uclass: correct the device numberKever Yang
Not like the mmc-legacy which the devnum starts from 1, it starts from 0 in mmc-uclass, so the device number should be (devnum + 1) in get_mmc_num(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-07-30m68k: code reformatting for all start.S filesAngelo Dureghello
This patch is style-related only, to reformat all the start.S code, actually not following a coherent style inside single files and between different cpu start.S files. Linux format has been respected, as - max line width at 80 columns - one 8 cols tab between asm instructions and operands - inline comments, where any, fixed at col 41 Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2016-07-30ARM: am57xx_evm: Enable QSPI supportVignesh R
AM571x IDK and AM572x IDK EVMs have spansion s25fl256s QSPI flash on the board connected to TI QSPI IP over CS0. Therefore enable QSPI support. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-30ARM: dts: am57xx-idk-common: Enable support for QSPIVignesh R
AM571x and AM572x IDK have a spansion s25fl256s QSPI flash on the board connected to TI QSPI over CS0. Hence, add QSPI and flash slave DT nodes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-30configs: am43xx_evm_defconfig: Enable CONFIG_SPI_FLASH_BARVignesh R
AM437x SK and AM437x IDK EVMs have 64MB flash, therefore enable CONFIG_SPI_FLASH_BAR to access flash regions above 16MB. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-30ARM: dts: dra7xx: Update spi-max-frequency for QSPIVignesh R
According to AM572x DM SPRS953A, QSPI max bus speed is 76.8MHz. Therefore update the spi-max-frequency value of QSPI node for DRA74 and DRA72 evm. This increase flash read speed by ~2MB/s. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-30configs: dra7xx: Update QSPI speed to 76.8MHzVignesh R
Now that QSPI driver can support 76.8MHz, update the CONFIG_SF_DEFAULT_SPEED to the same value. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-30spi: ti_qspi: dra7xx: Add support to use 76.8MHz clockVignesh R
According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, update the driver to use the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-30ARM: dra7xx: Change DPLL_PER_HS13 divider valueLokesh Vutla
According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, hence update QSPI input clock divider value (DPLL_PER_HS13) to provide 76.8MHz clock, so that driver can use the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-30sf: sf_params: Add AT25DF321 flash supportWenyou Yang
Add AT25DF321 flash support. Fix AT25DF321A device name. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-07 22:26:23 +0000