summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-24arm: am437x: cm-t43: set tps fseal bitNikita Kiryanov
Set TPS65218 FSEAL bit to 1 so that RTC could be powered using on-board 3V battery. This is necessary so that time and date will survive reboots and power offs. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24pmic: tps65218: add useful functions and definesNikita Kiryanov
Add the following functions: tps65218_reg_read() for accessing redisters tps65218_toggle_fseal() for toggling the fseal bit tps65218_lock_fsea() for locking the fseal bit to 1 Add the following defines: All status register bits Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24arm: am437x: cm-t43: split board fileNikita Kiryanov
Simplify the board file by splitting it to spl portion and u-boot portion. Some unnecessary includes were identified and removed. No functional changes. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24arm: am437x: cm-t43: define promptNikita Kiryanov
Define prompt for cm-t43. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24arm: am437x: cm-t43: support all available SPI flash chipsNikita Kiryanov
Add full support for SPI flash chips to future-proof U-Boot for cm-t43. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24arm: am437x: cm-t43: migrate CONFIG_DM_SERIAL to config fileNikita Kiryanov
Move CONFIG_DM_SERIAL to cm_t43_defconfig. This forces us to update the CONFIG_SYS_NS16550_REG_SIZE value for SPL. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24arm: am437x: cm-t43: fix cm-t43 bootNikita Kiryanov
spl_board_init() is necessary for boot. Remove the #undef that keeps it out of the boot sequence. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24board/BuR/kwb: cosmetic changesHannes Schmelzer
- fixup typo - fixup identation Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24board/BuR: split bur_am335x_common.h into am335x-specific and BuR common partsHannes Schmelzer
bur_am335x_common.h today holds all common configuration which is shared over all B&R boards. In future we want to bring up boards which are not based on AM335x only but we still want to have common configuration over all B&R boards independent from their architecture. To prepare this we introduce a new file "bur_cfg_common.h", where we move all common things, which are not architecture specific, from bur_am335x_common.h. On B&R am335x boards we include from now: #include <configs/bur_cfg_common.h> #include <configs/bur_am335x_common.h> On other B&R boards, we include only #include <configs/bur_cfg_common.h> Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24board/BuR: move everything possible from board's headerfile to KConfigHannes Schmelzer
We drop everything possible things from board headerfiles and replace this functionality with responsible settings in Kconfig (_defconfig). Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24board/BuR: use default u-boot prompt on all B&R boardsHannes Schmelzer
There is no need to have some specific prompt, so we drop this within defconfigs. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24board/BuR: drop ETH-support in SPL-StageHannes Schmelzer
During very early prototype-phase we did boot the AM335x boards initially from CPSW-EMAC. Now we don't need this feature anymore. So we drop it to save MLO-space and having therefore a more quickly boot. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24OMAP3SOM BOARD: Auto detect Logic PD ModelsAdam Ford
Logic PD makes four different system on modules. This patch will auto detect the board type and identify the corresponding device tree image. V2: Added 'default:' case to switch statement Since board_late_init() is defined as int, we now return 0 Signed-off-by: Derald Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com>
2016-02-24test/py: only check for SPL signature if SPL uses serial outputHeiko Schocher
check for U-Boot SPL signature only if SPL really has a serial output. So check if CONFIG_SPL_SERIAL_SUPPORT is active in board config. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-02-24pci_rom: fix may be used uninitialized warningAndreas Bießmann
Building pci_rom.c with my toolchain complains about may be used uninitialized rom varaible: ---8<--- +drivers/pci/pci_rom.c:269:25: note: 'rom' was declared here w+drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios': w+drivers/pci/pci_rom.c:154:14: warning: 'rom' may be used uninitialized in this function [-Wmaybe-uninitialized] --->8--- Fix this as done in 55616b86c745fcac5a791268ab8e7cba36965c0f the ram variable. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-02-24samsung: fix mkorigenspl for darwinAndreas Bießmann
Compiling the mkorigenspl tool on darwin complains about undefined ulong. Fix this by using the unified way. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-24tools: -Wno-deprecated-declarations for OpenSSL on darwinAndreas Bießmann
Since OpenSSL is deprecated on OS X in favour of Common Crypto API disable the warning for this host OS. Another solution would be to add some glue layer for crypto stuff, but I think this is not worth the effort. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-24Gracefully handle 64-bit signed-extended 32-bit Load addressesWilliam Cohen
To follow the MIPS 32-bit and 64-bit memory map conventions (*) recent MIPS Linux kernels are using a 64-bit sign extended value (0xffffffff80010000) for the 32-bit load address (0x80010000) of the Creator CI20 board kernel. When this 64-bit argument was passed to mkimage running on a 32-bit machine such as the Creator CI20 board the load address was incorrectly formed from the upper 32-bit sign-extend bits (0xffffffff) by the strtoul instead of from the lower 32-bits (0x80010000). The mkimage should be able to tolerate the longer sign-extended 64-bit version of the 32-bit arguments with the use of strtoull. Use of the strtoll in place of the strtol in mkimage.c resolves the issue of self hosted kernel builds for the Creator CI20 board (+) and (++). (*) http://techpubs.sgi.com/library/dynaweb_docs/0620/SGI_Developer/books/DevDriver_PG/sgi_html/ch01.html (+) https://github.com/MIPS/CI20_linux/issues/23 (++) https://github.com/MIPS/CI20_linux/issues/22 Signed-off-by: William Cohen <wcohen@redhat.com>
2016-02-24stm32: add support for stm32f7 & stm32f746 discovery boardVikas Manocha
This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24stm32x7: add support for stm32x7 serial driverVikas Manocha
This patch adds support for stm32f7 family usart peripheral. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-24gpio: stm32_gpio: move base addresses to the soc fileVikas Manocha
Base addresses for GPIOs could be different for different socs, this patch moves the base addresses from driver to the soc specific location. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24gpio: stm32_gpio: move clock config from driver to boardVikas Manocha
This patch removes the gpio clock enable from gpio driver & move it in the board code, making it possible to use the gpio driver with other socs. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-23Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-02-23sunxi: H3: Add support for the host usb-physJelle van der Waa
Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23sunxi: power: add support for sy8106a driverJelle van der Waa
SY8106A is a PMIC which is used on the Allwinner H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is implemented to set the default V-CPU voltage to 1200 mV. This driver is required to ensure the SY8106A V-CPU voltage is set to 1200 mV after a software reset. On cold boot the default SY8106A output voltage is selected to be 1200 mV by a pair of resistors on the Orange Pi PC and Plus. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2016-02-23spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLENChristophe Ricard
In some case wordlen may not be set. Use SPI_DEFAULT_WORDLEN as default. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23spi: omap3: Remove unused variable irqstatus in omap3_spi_txrxChristophe Ricard
Remove unused variable irqstatus in omap3_spi_txrx Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23defconfig: am437x_sk_evm: enable dma driver modelMugunthan V N
enable dma driver model for am437x_sk_evm as ti-edma3 supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23drivers: dma: ti-edma3: convert driver to adopt driver modelMugunthan V N
adopt ti-edma3 driver to device driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23spi: ti_qspi: compile out spi_flash_copy_mmap when CONFIG_DMA is definedMugunthan V N
When CONFIG_DMA is defined the default spi_flash_copy_mmap() can handle dma memory copy, so compile out spi_flash_copy_mmap() from ti_qspi driver when CONFIG_DMA config is defined. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23sf: spi_flash: use dma to copy data from mmap region if platform supportsMugunthan V N
Add dma memcpy api to the default spi_flash_copy_mmap(), so that dma will be used to copy data when CONFIG_DMA is defined for the platform. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23dma: Kconfig: Add TI_EDMA3 entryMugunthan V N
Add TI_EDMA3 entry on Kconfig with help description. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23dm: implement a DMA uclassMugunthan V N
Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23ARM: zynq: Wire-up saving environment to QSPIMichal Simek
Extend options for saving variables to QSPI. Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2016-02-22Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2016-02-22video: Add S3C24xx framebuffer supportMarek Vasut
Add basic framebuffer driver for the S3C24xx family of CPUs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vladimir Zapolskiy <vz@mleia.com> V2: Keep the Makefile sorted. Acked-by: Anatolij Gustschin <agust@denx.de>
2016-02-22ARM: zynq: Enable EDID for zyboMichal Simek
Zybo contains on board HDMI that's why enable EDID. Doing it via config because zynq i2c driver hasn't been moved to DM yet and enabling via Kconfig requires DM_I2C. This will be moved that driver is moved to DM. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22ARM: zynq: Add reset-gpio property for USB on ZyboMichal Simek
DTS syncup with Linux kernel. Add missing reset-gpio property. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22net: phy: realtek: Use generic genphy_parse_link() for RTL8211EMichal Simek
The problem with current implementation is that SPDDONE bit is 1 but link bit is zero. That's why phydev->link is setup to 0 which ending up in driver failure that link is not up. Log: Zynq> dhcp ethernet@e000b000 Waiting for PHY auto negotiation to complete....... done ethernet@e000b000: No link. There is at least 1ms delay between spddone bit and link up. Use genphy_read_status() instead of realtek implemenation which is working with page 11. Linux driver is also using generic implementation. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22ARM: zynq: Enable Realtek phys by defaultMichal Simek
This phy is available at Zybo board. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22i2c: spd: Extend SPD memory typesMichal Simek
Decode DDR, DDR3 and DDR4 memories. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22dm: ns16550: Add support for reg-offset propertyMichal Simek
reg-offset is the part of standard 8250 binding in the kernel. It is shifting start of address space by reg-offset. On Xilinx platform this offset is typically 0x1000. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-22zynq-common: Fix usbboot env variableJason Wu
Remove the miss-placed \0 and add missing ; for usbboot env variable. Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22ARM: zynq: Enable SPL RAM support by defaultMichal Simek
Use RAM support in jtagboot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-02-22ARM: zynq: Enable u-boot,dm-pre-reloc for qspiNathan Rossi
Enable u-boot,dm-pre-reloc for qspi for zc706, zed and microzed. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22serial: zynq: Change logic in putcMichal Simek
Sync logic with Linux kernel where TX empty flag is checked before char is sent. This logic is fixing problem with console on zynqmp platform. For example: DRAM: 2 GiB Enabling Caches... EL Level: �� sdhci@ff170000: 0 Using default environment Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-02-22ARM: zynq: Remove ZYNQ_BOOT_FREEBSD optionMichal Simek
Remove CONFIG_ZYNQ_BOOT_FREEBSD configuration option and setup CONFIG_SYS_MMC_MAX_DEVICE 1 for all Zynq boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22ARM: zynq: Read memory size setting from DTMichal Simek
OF_CONTROL is setup by default and memory reading is done via DT. Remove all config files with memory references. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22mmc: Kconfig: Add Arasan SDHCI entryMichal Simek
Add Arasan SDHCI entry to Kconfig and fix all references. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-21 02:27:58 +0000