summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.hTom Rini
There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05spl: Migrate SYS_SATA_FAT_BOOT_PARTITION to KconfigTom Rini
This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the current default via Kconfig rather than C code. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_PMAN et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NOBQFMAN CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME CONFIG_SYS_DPAA_RMAN CONFIG_SYS_PMAN Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_OMAP_ABE_SYSCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_OMAP_ABE_SYSCK Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Remove unused symbolsTom Rini
This commit removes the following unused symbols: CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_SIZE CONFIG_SYS_PAXE_BASE CONFIG_SYS_PCCNT CONFIG_SYS_PCDAT CONFIG_SYS_PCDDR CONFIG_SYS_PCI1_ADDR CONFIG_SYS_PCI2_ADDR CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_SIZE CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_SIZE CONFIG_SYS_PCIE3_ADDR CONFIG_SYS_PCIE4_ADDR CONFIG_SYS_PCIE3_IO_PHYS CONFIG_SYS_PCIE3_IO_VIRT CONFIG_SYS_PCIE4_IO_PHYS CONFIG_SYS_PCIE4_IO_VIRT CONFIG_SYS_PLL_SETTLING_TIME CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_SP_CENA_SIZE CONFIG_SYS_RCAR_I2C0_BASE CONFIG_SYS_RCAR_I2C1_BASE CONFIG_SYS_RCAR_I2C2_BASE CONFIG_SYS_RCAR_I2C3_BASE CONFIG_SYS_SATA CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_SGMII_REFCLK_MHZ CONFIG_SYS_SGMII_LINERATE_MHZ CONFIG_SYS_SGMII_RATESCALE CONFIG_SYS_SH_SDHI0_BASE CONFIG_SYS_SH_SDHI0_BASE CONFIG_SYS_SH_SDHI1_BASE CONFIG_SYS_SH_SDHI2_BASE CONFIG_SYS_SH_SDHI3_BASE CONFIG_SYS_SPI_ST_ENABLE_WP_PIN CONFIG_SYS_SPI_U_BOOT_SIZE CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT CONFIG_SYS_VCXK_BASE CONFIG_SYS_VCXK_DEFAULT_LINEALIGN CONFIG_SYS_VCXK_DOUBLEBUFFERED CONFIG_SYS_VCXK_ENABLE_DDR CONFIG_SYS_VCXK_ENABLE_PIN CONFIG_SYS_VCXK_ENABLE_PORT CONFIG_SYS_VCXK_INVERT_DDR CONFIG_SYS_VCXK_INVERT_PIN CONFIG_SYS_VCXK_INVERT_PORT CONFIG_SYS_VCXK_REQUEST_DDR CONFIG_SYS_VCXK_REQUEST_PIN CONFIG_SYS_VCXK_REQUEST_PORT CONFIG_SYS_VSC7385_BR_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05rtc: Remove unused driversTom Rini
These RTC drivers are currently unused and reference other unused CONFIG variables, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONSTom Rini
This symbol is specific to the PowerPC SPL implementation, so rename this to reflect that it's in SPL and used / tested there, so that we can then safely migrate it to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NOR_* to CFG_SYS_NOR_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_SIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_SIZE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_PAGE_2K et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_2K CONFIG_SYS_NAND_PAGE_4K Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_NO_SUBPAGE_WRITE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_MAX_OOBFREE CONFIG_SYS_NAND_MAX_ECCPOS Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05mtd: nand: raw: atmel_nand: Use ATMEL_BASE_ECC directlyTom Rini
This is the only driver, and only one platform makes use of, setting CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this case. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_HW_ECC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC_OOBFIRST Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Remove unused symbolsTom Rini
This commit removes the following unused symbols: CONFIG_SYS_NAND_DDR_LAW CONFIG_SYS_NAND_ECCSTEPS CONFIG_SYS_NAND_ECCTOTAL CONFIG_SYS_NAND_ENABLE_PIN_SPL CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES CONFIG_SYS_NAND_U_BOOT_RELOC_SP Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_DBW_8 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_DBW_8 CONFIG_SYS_NAND_DBW_16 Note that all instances of the code check for CONFIG_SYS_NAND_DBW_16 being defined, and then "else" to CONFIG_SYS_NAND_DBW_8 whereas all of the configs set CONFIG_SYS_NAND_DBW_8. So we introduce CONFIG_SYS_NAND_DBW_16 as an option. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Prepare v2023.01-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Merge branch '2022-12-05-add-IPv6-support'Tom Rini
To quote the author: This patch set adds basic IPv6 support to U-boot. It is based on Chris's Packham patches (https://lists.denx.de/pipermail/u-boot/2017-January/279366.html) Chris's patches were taken as base. There were efforts to launch it on HiFive SiFive Unmatched board but the board didn't work well. The code was refactored, fixed some bugs as CRC for little-endian, some parts were implemented in our own way, something was taken from Linux. Finally we did manual tests and the board worked well. Testing was done on HiFive SiFive Unmatched board (RISC-V)
2022-12-05configs: Add IPV6 config to sandbox_flattree_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05configs: Add IPV6 config to sandbox64_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05configs: Add IPV6 config to sandbox_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05test: dm: eth: Add ip6_make_lladdr testViacheslav Mitrofanov
Add a test that checks generated Link Local Address. Use in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add ip6_make_snma testViacheslav Mitrofanov
Add a test that checks generated Solicited Node Multicast Address from our ipv6 address. Use in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add ip6_addr_in_subnet testViacheslav Mitrofanov
Add a test if two address are in the same subnet. Use in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add csum_ipv6_magic testViacheslav Mitrofanov
Test checksum computation. csum_ipv6_magic() uses in upper layer protocols as TCP/UDP/ICMPv6/etc to calculate payload checksum. Series-changes: 3 - Fixed style problems Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add string_to_ip6 testViacheslav Mitrofanov
Add a test to check convertation from char* to struct in6_addr. Use in sandbox Series-changes: 3 - Fixed tests to use length param in string_to_ip6() Series-changes: 5 - Add test under #ifdef Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ping6: Add ping6 commandViacheslav Mitrofanov
Implement ping6 command to ping hosts using IPv6. It works the same way as an ordinary ping command. There is no ICMP request so it is not possible to ping our host. This patch adds options in Kconfig and Makefile to build ping6 command. Series-changes: 3 - Added structures and functions descriptions - Added to ping6_receive() return value instead of void Series-changes: 4 - Fixed structures and functions description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: tftp: Add IPv6 support for tftpbootViacheslav Mitrofanov
The command tftpboot uses IPv4 by default. Add the possibility to use IPv6 instead. If an address in the command is an IPv6 address it will use IPv6 to boot or if there is a suffix -ipv6 in the end of the command it also force using IPv6. All other tftpboot features and parameters are left the same. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Incorporate IPv6 support into u-boot net subsystemViacheslav Mitrofanov
Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add neighbor discovery mechanism into network init process. That is the main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and handle IPv6 packets. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add implementation of main IPv6 functionsViacheslav Mitrofanov
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives" had only empty implementations and were exposed as API for futher patches. This patch add implementation of these functions. Main functions are: net_ip6_handler() - IPv6 packet handler for incoming packets; net_send_udp_packet6() - make up and send an UDP packet; csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460 section 8.1; ip6_addr_in_subnet() - check if an address is in our subnet. Other functions are auxiliary. Series-changes: 3 - Added comments - Fixed style problems - Fixed return codes instead of -1 Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add ip6addr, gatewayip6, serverip6 variables callbacksViacheslav Mitrofanov
Implement actions on ip6addr, gatewayip6, serverip6 varaibles. on_ip6addr - convert IPv6 string addr to struct ip6_addr on_gatewayip6 - convert IPv6 string addr to struct ip6_addr on_serverip6 - convert IPv6 string addr to struct ip6_addr Series-changes: 3 - Removed memory allocation - Substituted -1 for error code Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Enable IPv6 typeconversion specifierViacheslav Mitrofanov
Add the possibility to recognize IPv6 address in print function. To output IPv6 address use %pI6 specifier. Series-changes: 3 - Substituted #if (...) for if (...) to get better readability Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add string_to_ip6 converterViacheslav Mitrofanov
This functions is used as a converter from IPv6 address string notation to struct ip6_addr that is used everywhere in IPv6 implementation. For example it is used to parse and convert IPv6 address from tftpboot command. Conversion algorithm uses two passes, first to verify syntax and locate colons and second pass to read the address. In case of valid IPv6 address it returns 0. Examples of valid strings: 2001:db8::0:1234:1 2001:0db8:0000:0000:0000:0000:1234:0001 ::1 ::ffff:192.168.1.1 Examples of invalid strings 2001:db8::0::0 (:: can only appear once) 2001:db8:192.168.1.1::1 (v4 part can only appear at the end) 192.168.1.1 (we don't implicity map v4) Series-changes: 3 - Added function description - Added length parameter to string_to_ip6() Series-changes: 4 - Fixed function description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add Neighbor Discovery Protocol (NDP)Viacheslav Mitrofanov
Implement basic of NDP. It doesn't include such things as Router Solicitation, Router Advertisement and Redirect. It just has Neighbor Solicitation and Neighbor Advertisement. Only these two features are used in u-boot IPv6. Implementation of some NDP functions uses API that was exposed in "net: ipv6: Add IPv6 basic primitives". Also this patch inlcudes update in Makefile to build NDP. Series-changes: 3 - Added structures and functions descriptions - Fixed style problems Series-changes: 4 - Fixed structures and functions description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add callbacks declarations to get access to IPv6 variablesViacheslav Mitrofanov
Set up callbacks for main IPv6 variables ip6add, serverip6, gatewayip6 and set options to them in flag file. These variables are often set up by users. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add IPv6 build optionsViacheslav Mitrofanov
Add options to Makefile and Kconfig file to build IPv6 Series-changes: 3 - Added help for IPv6 support Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add IPv6 basic primitivesViacheslav Mitrofanov
This patch is a collection of basic primitives that are prerequisite for further IPv6 implementation. There are structures definition such as IPv6 header, UDP header (for TFTP), ICMPv6 header. There are auxiliary defines such as protocol codes, padding, struct size and etc. Also here are functions prototypes and its empty implementation that will be used as API for further patches. Here are variables declaration such as IPv6 address of our host, gateway, ipv6 server. Series-changes: 3 - Added functions and structures descriptions - Removed enums ND_OPT_*. It will be moved into further patches - Substituted -1 for error codes Series-changes: 4 - Changed functions and structures description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Merge tag 'xilinx-for-v2023.01-rc3-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2023.01-rc3-v2 xilinx: - Fix MAC address selection for System Controller from FRU - Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol) versal: - Create u-boot.elf for mini spi configurations versal-net: - Enable MT35XU flash zynq: - Add missing timer to DT for mini configurations zynqmp: - Do not include psu_init to U-Boot by default - Do not enable IPI by default to mini U-Boot - Update Luca's fragment - Fix SPL_FS_LOAD_PAYLOAD_NAME usage spi: - gqspi: Fix tapdelay values - gqspi: Fix 64bit address support - cadence: Remove condition for calling enable linear mode - nor-core: Invert logic to reflect sst26 flash unlocked net: - Add PCS/PMA phy support
2022-12-05Merge tag 'i2cfixes-for-v2023.01-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-i2c i2c Fixes for v2023.01-rc3 - nuovoton driver: rename npcm_i2c -> npcm-i2c from Jim Liu
2022-12-05mtd: spi-nor-core: Invert logic to reflect sst26 flash unlockedAlgapally Santosh Sagar
flash_is_locked is changed to flash_is_unlocked with commit 513c6071ce73 ("mtd: spi: Convert is_locked callback to is_unlocked"). sst26_is_locked() is also changed to sst26_is_unlocked() but the logic remained same. Invert the logic for the flash lock/unlock to work properly. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20221122051833.13306-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05xilinx: zynqmp: Fix SPL_FS_LOAD_PAYLOAD_NAME usageMichal Simek
SPL_FS_LOAD_PAYLOAD_NAME depends on SPL to be enabled. If SPL is not enabled code still expects SPL_FS_LOAD_PAYLOAD_NAME to be present. That's why setup proper dependency in the code. And by doing so also change the logic around dfu_alt_info string composition to be simpler. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3989c390a4acae13a1b05c040e14fb3d68bced02.1669986373.git.michal.simek@amd.com
2022-12-05arm64: versal-net: Enable defconfig for Micron octal flashesAshok Reddy Soma
Micron mt35 series octal flashes are under config option CONFIG_SPI_FLASH_MT35XU. Enable it in default defconfig for octal flashes to be detected. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dfaf73a72c7b408f1b8530f411c405d3dcf9f854.1669717110.git.michal.simek@amd.com
2022-12-05spi: cadence-qspi: Remove condition for calling enable linear modeAshok Reddy Soma
cadence_qspi_apb_enable_linear_mode() has a weak function defined, so no need to gaurd this under if (CONFIG_IS_ENABLED(ARCH_VERSAL)). In cadence_qspi_apb_write_execute(), enable linear mode is called twice by mistake, remove extra one. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221129114134.18909-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-05 17:35:09 +0000