summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-15binman: Drop .note section from ELFSimon Glass
Recent versions of binutils add a '.note.gnu.property' into the ELF file. This is not required and interferes with the expected output. Drop it. Also fix testMakeElf() to use a different file for input and output. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: Allow use of help and entry-docs without libfdtSimon Glass
At present if libfdt is not available binman can't do anything much. Improve the situation a little. Ideally there should be a test to cover this, but I'm not quite sure how to fake this. Signed-off-by: Simon Glass <sjg@chromium.org> (fixed up missing ReadChildData() enty test)
2019-10-15binman: Use cls instead of self for class methodsSimon Glass
It is more common to use the name 'cls' for the class object of a class method, to distinguish it from normal methods, which use 'self' Update the binman tests accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15patman: Update command.Run() to handle failure betterSimon Glass
At present tools are not expected to fail. If they do an exception is raised but there is no detail about what went wrong. This makes it hard to debug if something does actually go wrong. Fix this by outputting both stderr and stdout on failure. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15patman: Drop binary parameterSimon Glass
Since cros_subprocess use bytestrings now, this feature not needed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- vining_fpga updates
2019-10-14Merge tag 'u-boot-imx-20191014' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14Merge tag 'video-for-2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - panel bridge support in stm32 ltdc - DSI host uclass - sandbox DSI host uclass test driver and DSI host test - MIPI DSI helpers - Synopsys Designware MIPI DSI host bridge driver - STM32 DSI controller driver - OTM800A and RM68200 panel support - DSI host updates for stm32f769 and stm32mp1 dtsi files - splash screen for stm32f769 and stm32mp1 boards - stm32 defconfig updates for display support
2019-10-14Merge tag 'mmc-10-10-2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - Add sdhci driver for Broadcom iProc platform - Add a driver callback for power-cycle for mmc - Implement host_power_cycle callback for stm32_sdmmc2 - spl: dm_mmc: Initialize only the required mmc device
2019-10-14i2c: imx_lpi2c: add ipg clkPeng Fan
The controller needs two clk, per clk and ipg clk, so let's add ipg clk. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-14imx :hab: Add hab version commandSjoerd Simons
THe RVT data includes a major and minor version in its header parameter. Add a new command to print this out. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-14imx: imx8mm_evk: add board_mmc_get_env_devPeng Fan
Add board_mmc_get_env_dev to correctly return devno for mmc env Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-14mx7ulp_evk: Use imx_ddr_size()Fabio Estevam
Use imx_ddr_size() to retrieve the total DDR size instead of passing a hardcoded memory size. imx_ddr_size() calculates the memory size based on the actual MMDC registers values and is useful to detect misconfigurations, so switch to this more robust approach. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-14imx: mmdc_size: Allow building it for i.MX7ULPFabio Estevam
i.MX7ULP uses the same MMDC controller IP as found on i.MX53 and i.MX6, so build mmdc_size.c for i.MX7ULP as well. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-14imx: mmdc_size: Fix checkpatch warningsFabio Estevam
The original imx_ddr_size() implementation had some issues reported by checkpatch like this: CHECK: Prefer kernel type 'u32' over 'uint32_t' #127: FILE: arch/arm/mach-imx/mmdc_size.c:16: + uint32_t ctl; WARNING: Prefer 'unsigned int' to bare use of 'unsigned' #151: FILE: arch/arm/mach-imx/mmdc_size.c:40: + unsigned ctl = readl(&mem->ctl); Fix all of them. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-14imx: Place imx_ddr_size() into a separate fileFabio Estevam
Place imx_ddr_size() into a separate file. The motivation for doing this is to be able to easily reuse imx_ddr_size() on i.MX7ULP. Currently imx_ddr_size() is inside arch/arm/mach-imx/cpu.c, which is not built for i.MX7ULP. Changing the logic to allow building cpu.c for i.MX7UP would require adding several ifdef's, leading to a not a very elegant solution. To allow better reuse, just place imx_ddr_size() into a common mmdc_size.c file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-13stm32mp1: configs: add display devicesYannick Fertré
Add support of panels otm8009A, RM68200 & DSI controller. Limit resolution to 1280x800. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13stm32mp1: configs: update videoYannick Fertré
Update video configs to support bitmap 16bpp, 24bpp, 32bpp & RLE8. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13ARM: dts: stm32mp1: add dsi host for stm32mp157c-dk2 boardYannick Fertré
The new class dsi host allows the management of the bridge DPI to DSI. This bridge is embedded in the chipset mp1 (come from synopsys company). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13ARM: dts: stm32mp1: add dsi host for stm32mp157c-ev1 boardYannick Fertré
The new class dsi host allows the management of the bridge DPI to DSI. This bridge is embedded in the chipset mp1 (come from synopsys company). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13ARM: dts: stm32f769: add display for STM32F769 disco boardYannick Fertré
Enable the display controller, mipi dsi bridge & panel. Set panel display timings. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13board: Add STM32F769 SoC, discovery board supportYannick Fertré
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add support of panel RM68200Yannick Fertré
Support for Raydium RM68200 720p dsi 2dl video mode panel. This rm68200 panel driver is based on the Linux Kernel driver from drivers/gpu/drm/panel/panel-raydium-rm68200.c. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add support of panel OTM8009AYannick Fertré
Support for Orise Tech otm8009a 480p dsi 2dl video mode panel. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add support of STM32 MIPI DSI controller driverYannick Fertré
Add the STM32 DSI controller driver that uses the Synopsys DesignWare MIPI DSI host controller bridge. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add MIPI DSI host controller bridgeYannick Fertré
Add a Synopsys Designware MIPI DSI host bridge driver, based on the Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13dm: Add a dsi host uclassYannick Fertré
Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13configs: icorem6: Enable nandbcb commandShyam Saini
This also enables mtd configs which are required by nandbcb command. This command would be used to configure boot control block(BCB) while writing spl image on nand device. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-10-13colibri_imx7: provide proper node name to pmic_getIgor Opaniuk
Implementation of pmic_get() uses uclass_find_device_by_name(), which behaviour was changed in 4213609cc7 ("drivers: core: use strcmp when find device by name"). Now we have to supply full node name with unit address. Fixes boot issue: U-Boot 2019.07-00788-g0ef6e69a1e-dirty (Jul 19 2019 - 15:27:02 +0300) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 41C Reset cause: POR DRAM: 512 MiB initcall sequence 9ffd3a4c failed at call 87803c61 (err=-19) ERROR Please RESET the board Fixes: 4213609cc7("drivers: core: use strcmp when find device by name") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13spl, Makefile: Take external offset into account for fit imagesSjoerd Simons
When building a FIT image for SPL to load also take into account the configured external offset. This allows the SPL to load the u-boot FIT image correctly when configuring SECURE_BOOT on i.mx6 is enabled (with CONFIG_FIT_EXTERNAL_OFFSET=0x3000). Note this doesn't allow secure booting; but it does allow an unsigned SPL/u-boot with secure boot support eanbled to boot on open device. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-13colibri_imx7: remove legacy sdboot wrapperIgor Opaniuk
Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13colibri_imx6: remove legacy sdboot wrapperIgor Opaniuk
Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13colibri-imx6ull: remove legacy sdboot wrapperIgor Opaniuk
Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13apalis_imx6: remove legacy sdboot wrapperIgor Opaniuk
Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13imx8qm/qxp: Set SPL TEXT base to OCRAM baseYe Li
Modify the SPL TEXT base from OCRAM alias to OCRAM base 0x100000, so we can use full OCRAM not limit to 96KB Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13imx8: Jump from alias to OCRAM address at SPL initYe Li
When running SPL on iMX8, the A core starts at address 0 which is a alias to OCRAM 0x100000. The alias only map first 96KB of OCRAM, so this require the SPL size can't beyond 96KB. But when using SPL DM, the size increase significantly and may exceed 96KB. So to fix the problem, we will change SPL linker address to OCRAM address 0x100000. And then jump to the absolute address not the PC relative address for entering OCRAM. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13imx: config: Update KP's TPC70 config to support SWUpdateLukasz Majewski
This patch updates envs responsible for using USB pendrive as a SWUpdate based tool for recovery and update. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-bootLukasz Majewski
This patch converts the TPC70 to use driver model and device tree description in both SPL and u-boot proper. Notable changes (DM/DTS conversion): - PINCTRL{_IMX6} - DM_I2C - enable 'regulator' and 'pmic' commands - DM_MMC and BLK (USDHC) - DM_ETH - DM WDT (including SYSRESET) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: dts: Add u-boot specific set of device tree properties for tpc70Lukasz Majewski
This commit adds new file - imx6q-kp-u-boot.dtsi with a set of u-boot specific properties for imx6q KP device. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: dts: Add TPC70 board (imx6q based) device tree descriptionLukasz Majewski
This commit defines the TPC70 imx6q board with device tree description. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: led: Enable LED default stateLukasz Majewski
This change sets the default state of LEDs on TPC70. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: cosmetic: Replace magic numbers when setting ENET clockLukasz Majewski
This is a cosmetic change, just to use proper define instead of magic numbers. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD bootLukasz Majewski
The TPC70 can boot from SD card (debug/development) and eMMC (production). The board_boot_order() function provides a run time check for the device from which one wants to boot (it is selected by GPIO pins setup). Moreover, a fallback to SD card is provided if the detection is not possible or working properly. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL updateLukasz Majewski
The TPC70 can boot from eMMC's boot0. This patch allows it to update this HW partition's SPL. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: config: Add script commands to update u-boot and OE's wicLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13pico-imx7d: Support distro boot for FIT image caseJun Nie
Support distro boot for pico imx7d in FIT image case. Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-10-13pico-imx7d: add config to enable CAAMJun Nie
Add config to enable CAAM so that hardware random number generator works. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2019-10-13ARM: imx6q_logic: Remove legacy pinmuxing code from board file.Adam Ford
With the OCRAM expanded to 256KB and the SPL_PINCTRL enabled with -u-boot.dtsi entries to include the pinmuxing in SPL, the manual code setting up the pinmux can go away. This patch removes the legacy pinmuxing code from the board file. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-13ARM: imx6q_logic: Enable Pin muxing in SPLAdam Ford
With the 256KB of OCRAM available to SPL now, there should be enough room to enable the pinmuxing in SPL from the device tree. This patch enables SPL_PINCTRL et al and adds the serial and usdhc pin mux references to the -u-boot.dtsi file so the pins can be configured from the device tree. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-13ARM: imx6q_logic: Enable 256KB OCRAMAdam Ford
Since this board config only supports, the i.MX6D/i.MX6Q configurations, 256K of on-chip RAM is available which increases the space available to SPL to help further reduce board code and further enable device tree functions. This patch enables 256K of RAM. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 13:39:50 +0000