diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/P1022DS.h | 2 | ||||
| -rw-r--r-- | include/linux/mtd/bbm.h | 49 | ||||
| -rw-r--r-- | include/linux/mtd/mtd.h | 203 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 173 | ||||
| -rw-r--r-- | include/linux/string.h | 3 | ||||
| -rw-r--r-- | include/mtd/mtd-abi.h (renamed from include/linux/mtd/mtd-abi.h) | 53 | ||||
| -rw-r--r-- | include/nand.h | 8 |
7 files changed, 327 insertions, 164 deletions
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 8b13b107e28..69412e461e8 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -316,7 +316,6 @@ #define CONFIG_SYS_HUSH_PARSER /* Video */ -#define CONFIG_FSL_DIU_FB #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) @@ -336,7 +335,6 @@ #endif #ifndef CONFIG_FSL_DIU_FB -#define CONFIG_ATI #endif #ifdef CONFIG_ATI diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 8cbcdae1143..71292b1a86b 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -81,32 +81,53 @@ struct nand_bbt_descr { #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 -/* The bbt is at the given page, else we must scan for the bbt */ -#define NAND_BBT_SEARCH 0x00000040 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none exists */ #define NAND_BBT_CREATE 0x00000200 +/* + * Create an empty BBT with no vendor information. Vendor's information may be + * unavailable, for example, if the NAND controller has a different data and OOB + * layout or if this information is already purged. Must be used in conjunction + * with NAND_BBT_CREATE. + */ +#define NAND_BBT_CREATE_EMPTY 0x00000400 /* Search good / bad pattern through all pages of a block */ -#define NAND_BBT_SCANALLPAGES 0x00000400 +#define NAND_BBT_SCANALLPAGES 0x00000800 /* Scan block empty during good / bad block scan */ -#define NAND_BBT_SCANEMPTY 0x00000800 +#define NAND_BBT_SCANEMPTY 0x00001000 /* Write bbt if neccecary */ -#define NAND_BBT_WRITE 0x00001000 +#define NAND_BBT_WRITE 0x00002000 /* Read and write back block contents when writing bbt */ -#define NAND_BBT_SAVECONTENT 0x00002000 +#define NAND_BBT_SAVECONTENT 0x00004000 /* Search good / bad pattern on the first and the second page */ -#define NAND_BBT_SCAN2NDPAGE 0x00004000 +#define NAND_BBT_SCAN2NDPAGE 0x00008000 /* Search good / bad pattern on the last page of the eraseblock */ -#define NAND_BBT_SCANLASTPAGE 0x00008000 -/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */ -#define NAND_BBT_SCANBYTE1AND6 0x00100000 -/* The nand_bbt_descr was created dynamicaly and must be freed */ -#define NAND_BBT_DYNAMICSTRUCT 0x00200000 -/* The bad block table does not OOB for marker */ -#define NAND_BBT_NO_OOB 0x00400000 +#define NAND_BBT_SCANLASTPAGE 0x00010000 +/* + * Use a flash based bad block table. By default, OOB identifier is saved in + * OOB area. This option is passed to the default bad block table function. + */ +#define NAND_BBT_USE_FLASH 0x00020000 +/* + * Do not store flash based bad block table marker in the OOB area; store it + * in-band. + */ +#define NAND_BBT_NO_OOB 0x00040000 +/* + * Do not write new bad block markers to OOB; useful, e.g., when ECC covers + * entire spare area. Must be used with NAND_BBT_USE_FLASH. + */ +#define NAND_BBT_NO_OOB_BBM 0x00080000 + +/* + * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr + * was allocated dynamicaly and must be freed in nand_release(). Has no meaning + * in nand_chip.bbt_options. + */ +#define NAND_BBT_DYNAMICSTRUCT 0x80000000 /* The maximum number of blocks to scan for a bbt */ #define NAND_BBT_SCAN_MAXBLOCKS 4 diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 141c96024c5..6f44abdc161 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -9,7 +9,8 @@ #include <linux/types.h> #include <div64.h> -#include <linux/mtd/mtd-abi.h> +#include <mtd/mtd-abi.h> +#include <asm/errno.h> #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 @@ -65,22 +66,6 @@ struct mtd_erase_region_info { unsigned long *lockmap; /* If keeping bitmap of locks */ }; -/* - * oob operation modes - * - * MTD_OOB_PLACE: oob data are placed at the given offset - * MTD_OOB_AUTO: oob data are automatically placed at the free areas - * which are defined by the ecclayout - * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data - * is inserted into the data. Thats a raw image of the - * flash contents. - */ -typedef enum { - MTD_OOB_PLACE, - MTD_OOB_AUTO, - MTD_OOB_RAW, -} mtd_oob_mode_t; - /** * struct mtd_oob_ops - oob operation operands * @mode: operation mode @@ -92,7 +77,7 @@ typedef enum { * @ooblen: number of oob bytes to write/read * @oobretlen: number of oob bytes written/read * @ooboffs: offset of oob data in the oob area (only relevant when - * mode = MTD_OOB_PLACE) + * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW) * @datbuf: data buffer - if NULL only oob data are read/written * @oobbuf: oob data buffer * @@ -101,7 +86,7 @@ typedef enum { * OOB area. */ struct mtd_oob_ops { - mtd_oob_mode_t mode; + unsigned int mode; size_t len; size_t retlen; size_t ooblen; @@ -133,13 +118,25 @@ struct mtd_info { u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */ u_int32_t oobavail; /* Available OOB bytes per block */ + /* + * read ops return -EUCLEAN if max number of bitflips corrected on any + * one region comprising an ecc step equals or exceeds this value. + * Settable by driver, else defaults to ecc_strength. User can override + * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed; + * see Documentation/ABI/testing/sysfs-class-mtd for more detail. + */ + unsigned int bitflip_threshold; + /* Kernel-only stuff starts here. */ const char *name; int index; - /* ecc layout structure pointer - read only ! */ + /* ECC layout structure pointer - read only! */ struct nand_ecclayout *ecclayout; + /* max number of correctible bit errors per ecc step */ + unsigned int ecc_strength; + /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. */ @@ -147,25 +144,17 @@ struct mtd_info { struct mtd_erase_region_info *eraseregions; /* - * Erase is an asynchronous operation. Device drivers are supposed - * to call instr->callback() whenever the operation completes, even - * if it completes with a failure. - * Callers are supposed to pass a callback function and wait for it - * to be called before writing to the block. + * Do not call via these pointers, use corresponding mtd_*() + * wrappers instead. */ - int (*erase) (struct mtd_info *mtd, struct erase_info *instr); - - /* This stuff for eXecute-In-Place */ - /* phys is optional and may be set to NULL */ - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, + int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); + int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, phys_addr_t *phys); - - /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ - void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); - - - int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); /* In blackbox flight recorder like scenarios we want to make successful writes in interrupt context. panic_write() is only intended to be @@ -174,24 +163,35 @@ struct mtd_info { longer, this function can break locks and delay to ensure the write succeeds (but not sleep). */ - int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); - int (*read_oob) (struct mtd_info *mtd, loff_t from, + int (*_read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); - int (*write_oob) (struct mtd_info *mtd, loff_t to, + int (*_write_oob) (struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); - + int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); + int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len); + void (*_sync) (struct mtd_info *mtd); + int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); /* - * Methods to access the protection register area, present in some - * flash devices. The user data is one time programmable but the - * factory data is read only. + * If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. */ - int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); - int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); - int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_get_device) (struct mtd_info *mtd); + void (*_put_device) (struct mtd_info *mtd); /* XXX U-BOOT XXX */ #if 0 @@ -201,18 +201,6 @@ struct mtd_info { */ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); #endif - - /* Sync */ - void (*sync) (struct mtd_info *mtd); - - /* Chip-supported device locking */ - int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - - /* Bad block management functions */ - int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); - int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); - /* XXX U-BOOT XXX */ #if 0 struct notifier_block reboot_notifier; /* default mode before reboot */ @@ -227,15 +215,59 @@ struct mtd_info { struct module *owner; int usecount; - - /* If the driver is something smart, like UBI, it may need to maintain - * its own reference counting. The below functions are only for driver. - * The driver may register its callbacks. These callbacks are not - * supposed to be called by MTD users */ - int (*get_device) (struct mtd_info *mtd); - void (*put_device) (struct mtd_info *mtd); }; +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf); +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); + +int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); + +static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + ops->retlen = ops->oobretlen = 0; + if (!mtd->_write_oob) + return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_write_oob(mtd, to, ops); +} + +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); + +/* XXX U-BOOT XXX */ +#if 0 +int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); +#endif + +static inline void mtd_sync(struct mtd_info *mtd) +{ + if (mtd->_sync) + mtd->_sync(mtd); +} + +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); + static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) { do_div(sz, mtd->erasesize); @@ -247,6 +279,16 @@ static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) return do_div(sz, mtd->erasesize); } +static inline int mtd_has_oob(const struct mtd_info *mtd) +{ + return mtd->_read_oob && mtd->_write_oob; +} + +static inline int mtd_can_have_bb(const struct mtd_info *mtd) +{ + return !!mtd->_block_isbad; +} + /* Kernel-side ioctl definitions */ extern int add_mtd_device(struct mtd_info *mtd); @@ -269,12 +311,6 @@ struct mtd_notifier { extern void register_mtd_user (struct mtd_notifier *new); extern int unregister_mtd_user (struct mtd_notifier *old); - -int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen); - -int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, - unsigned long count, loff_t from, size_t *retlen); #endif #ifdef CONFIG_MTD_PARTITIONS @@ -296,17 +332,34 @@ static inline void mtd_erase_callback(struct erase_info *instr) #define MTD_DEBUG_LEVEL3 (3) /* Noisy */ #ifdef CONFIG_MTD_DEBUG +#define pr_debug(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) #define MTDDEBUG(n, args...) \ do { \ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ +#define pr_debug(args...) #define MTDDEBUG(n, args...) \ do { \ if (0) \ printk(KERN_INFO args); \ } while(0) #endif /* CONFIG_MTD_DEBUG */ +#define pr_info(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) +#define pr_warn(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) +#define pr_err(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) + +static inline int mtd_is_bitflip(int err) { + return err == -EUCLEAN; +} + +static inline int mtd_is_eccerr(int err) { + return err == -EBADMSG; +} + +static inline int mtd_is_bitflip_or_eccerr(int err) { + return mtd_is_bitflip(err) || mtd_is_eccerr(err); +} #endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 98bf255bb28..2055584374d 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -46,7 +46,7 @@ extern void nand_wait_ready(struct mtd_info *mtd); * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ -#define NAND_MAX_OOBSIZE 576 +#define NAND_MAX_OOBSIZE 640 #define NAND_MAX_PAGESIZE 8192 /* @@ -82,6 +82,8 @@ extern void nand_wait_ready(struct mtd_info *mtd); #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_PARAM 0xec +#define NAND_CMD_GET_FEATURES 0xee +#define NAND_CMD_SET_FEATURES 0xef #define NAND_CMD_RESET 0xff #define NAND_CMD_LOCK 0x2a @@ -142,7 +144,7 @@ typedef enum { #define NAND_ECC_READ 0 /* Reset Hardware ECC for write */ #define NAND_ECC_WRITE 1 -/* Enable Hardware ECC before syndrom is read back from flash */ +/* Enable Hardware ECC before syndrome is read back from flash */ #define NAND_ECC_READSYN 2 /* Bit mask for flags passed to do_nand_read_ecc */ @@ -153,9 +155,7 @@ typedef enum { * Option constants for bizarre disfunctionality and real * features. */ -/* Chip can not auto increment pages */ -#define NAND_NO_AUTOINCR 0x00000001 -/* Buswitdh is 16 bit */ +/* Buswidth is 16 bit */ #define NAND_BUSWIDTH_16 0x00000002 /* Device supports partial programming without padding */ #define NAND_NO_PADDING 0x00000004 @@ -179,12 +179,6 @@ typedef enum { * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 -/* - * Chip does not require ready check on read. true - * for all large page devices, as they do not support - * autoincrement. - */ -#define NAND_NO_READRDY 0x00000100 /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 @@ -202,34 +196,21 @@ typedef enum { (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) /* Macros to identify the above */ -#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) /* Non chip related options */ -/* - * Use a flash based bad block table. OOB identifier is saved in OOB area. - * This option is passed to the default bad block table function. - */ -#define NAND_USE_FLASH_BBT 0x00010000 /* This option skips the bbt scan during initialization. */ -#define NAND_SKIP_BBTSCAN 0x00020000 +#define NAND_SKIP_BBTSCAN 0x00010000 /* * This option is defined if the board driver allocates its own buffers * (e.g. because it needs them DMA-coherent). */ -#define NAND_OWN_BUFFERS 0x00040000 +#define NAND_OWN_BUFFERS 0x00020000 /* Chip may not exist, so silence any errors in scan */ -#define NAND_SCAN_SILENT_NODEV 0x00080000 -/* - * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch - * the OOB area. - */ -#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000 -/* Create an empty BBT with no vendor information if the BBT is available */ -#define NAND_CREATE_EMPTY_BBT 0x01000000 +#define NAND_SCAN_SILENT_NODEV 0x00040000 /* Options set by nand scan */ /* bbt has already been read */ @@ -244,6 +225,21 @@ typedef enum { /* Keep gcc happy */ struct nand_chip; +/* ONFI timing mode, used in both asynchronous and synchronous mode */ +#define ONFI_TIMING_MODE_0 (1 << 0) +#define ONFI_TIMING_MODE_1 (1 << 1) +#define ONFI_TIMING_MODE_2 (1 << 2) +#define ONFI_TIMING_MODE_3 (1 << 3) +#define ONFI_TIMING_MODE_4 (1 << 4) +#define ONFI_TIMING_MODE_5 (1 << 5) +#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) + +/* ONFI feature address */ +#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1 + +/* ONFI subfeature parameters length */ +#define ONFI_SUBFEATURE_PARAM_LEN 4 + struct nand_onfi_params { /* rev info and features block */ /* 'O' 'N' 'F' 'I' */ @@ -326,27 +322,32 @@ struct nand_hw_control { }; /** - * struct nand_ecc_ctrl - Control structure for ecc - * @mode: ecc mode - * @steps: number of ecc steps per page - * @size: data bytes per ecc step - * @bytes: ecc bytes per step - * @total: total number of ecc bytes per page - * @prepad: padding information for syndrome based ecc generators - * @postpad: padding information for syndrome based ecc generators + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode + * @steps: number of ECC steps per page + * @size: data bytes per ECC step + * @bytes: ECC bytes per step + * @strength: max number of correctible bits per ECC step + * @total: total number of ECC bytes per page + * @prepad: padding information for syndrome based ECC generators + * @postpad: padding information for syndrome based ECC generators * @layout: ECC layout control struct pointer - * @priv: pointer to private ecc control data - * @hwctl: function to control hardware ecc generator. Must only + * @priv: pointer to private ECC control data + * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available - * @calculate: function for ecc calculation or readback from ecc hardware - * @correct: function for ecc correction, matching to ecc generator (sw/hw) + * @calculate: function for ECC calculation or readback from ECC hardware + * @correct: function for ECC correction, matching to ECC generator (sw/hw) * @read_page_raw: function to read a raw page without ECC * @write_page_raw: function to write a raw page without ECC - * @read_page: function to read a page according to the ecc generator - * requirements. - * @read_subpage: function to read parts of the page covered by ECC. - * @write_page: function to write a page according to the ecc generator + * @read_page: function to read a page according to the ECC generator + * requirements; returns maximum number of bitflips corrected in + * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * @read_subpage: function to read parts of the page covered by ECC; + * returns same as read_page() + * @write_page: function to write a page according to the ECC generator * requirements. + * @write_oob_raw: function to write chip OOB data without ECC + * @read_oob_raw: function to read chip OOB data without ECC * @read_oob: function to read chip OOB data * @write_oob: function to write chip OOB data */ @@ -356,6 +357,7 @@ struct nand_ecc_ctrl { int size; int bytes; int total; + int strength; int prepad; int postpad; struct nand_ecclayout *layout; @@ -366,25 +368,28 @@ struct nand_ecc_ctrl { int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc); int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page); - void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf); + uint8_t *buf, int oob_required, int page); + int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page); + uint8_t *buf, int oob_required, int page); int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offs, uint32_t len, uint8_t *buf); - void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf); - int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page, - int sndcmd); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); }; /** * struct nand_buffers - buffer structure for read/write - * @ecccalc: buffer for calculated ecc - * @ecccode: buffer for ecc read from flash + * @ecccalc: buffer for calculated ECC + * @ecccode: buffer for ECC read from flash * @databuf: buffer for data - dynamically sized * * Do not change the order of buffers. databuf and oobrbuf must be in @@ -418,7 +423,7 @@ struct nand_buffers { * mtd->oobsize, mtd->writesize and so on. * @id_data contains the 8 bytes values of NAND_CMD_READID. * Return with the bus width. - * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing * device ready/busy line. If set to NULL no access to * ready/busy is available and the ready/busy information * is read from the chip status register. @@ -426,17 +431,17 @@ struct nand_buffers { * commands to the chip. * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on * ready. - * @ecc: [BOARDSPECIFIC] ecc control ctructure + * @ecc: [BOARDSPECIFIC] ECC control structure * @buffers: buffer structure for read/write * @hwcontrol: platform-specific hardware control structure - * @ops: oob operation operands * @erase_cmd: [INTERN] erase command write function, selectable due * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device - * @oob_poi: poison value buffer + * @oob_poi: "poison value buffer," used for laying out OOB data + * before writing * @page_shift: [INTERN] number of address bits in a page (column * address bits). * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock @@ -445,10 +450,14 @@ struct nand_buffers { * @options: [BOARDSPECIFIC] various chip options. They can partly * be set to inform nand_scan about special functionality. * See the defines for further explanation. + * @bbt_options: [INTERN] bad block specific options. All options used + * here must come from bbm.h. By default, these options + * will be copied to the appropriate nand_bbt_descr's. * @badblockpos: [INTERN] position of the bad block marker in the oob * area. - * @badblockbits: [INTERN] number of bits to left-shift the bad block - * number + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays @@ -460,7 +469,9 @@ struct nand_buffers { * non 0 if ONFI supported. * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is * supported, 0 otherwise. - * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @onfi_set_features [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features [REPLACEABLE] get the features for ONFI nand + * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -468,9 +479,9 @@ struct nand_buffers { * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial * bad block scan. * @controller: [REPLACEABLE] a pointer to a hardware controller - * structure which is shared among multiple independend + * structure which is shared among multiple independent * devices. - * @priv: [OPTIONAL] pointer to private chip date + * @priv: [OPTIONAL] pointer to private chip data * @errstat: [OPTIONAL] hardware specific function to perform * additional error status checks (determine if errors are * correctable). @@ -501,10 +512,16 @@ struct nand_chip { int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw); + const uint8_t *buf, int oob_required, int page, + int cached, int raw); + int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); int chip_delay; unsigned int options; + unsigned int bbt_options; int page_shift; int phys_erase_shift; @@ -534,8 +551,6 @@ struct nand_chip { struct nand_buffers *buffers; struct nand_hw_control hwcontrol; - struct mtd_oob_ops ops; - uint8_t *bbt; struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; @@ -557,6 +572,8 @@ struct nand_chip { #define NAND_MFR_HYNIX 0xad #define NAND_MFR_MICRON 0x2c #define NAND_MFR_AMD 0x01 +#define NAND_MFR_MACRONIX 0xc2 +#define NAND_MFR_EON 0x92 /** * struct nand_flash_dev - NAND Flash Device ID Structure @@ -615,9 +632,9 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, * @partitions: mtd partition list * @chip_delay: R/B delay value in us * @options: Option flags, e.g. 16bit buswidth - * @ecclayout: ecc layout info structure + * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH + * @ecclayout: ECC layout info structure * @part_probe_types: NULL-terminated array of probe types - * @priv: hardware controller specific settings */ struct platform_nand_chip { int nr_chips; @@ -627,8 +644,8 @@ struct platform_nand_chip { struct nand_ecclayout *ecclayout; int chip_delay; unsigned int options; + unsigned int bbt_options; const char **part_probe_types; - void *priv; }; /* Keep gcc happy */ @@ -650,6 +667,7 @@ struct platform_nand_ctrl { int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + unsigned char (*read_byte)(struct mtd_info *mtd); void *priv; }; @@ -679,4 +697,23 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); uint8_t nand_read_byte(struct mtd_info *mtd); +/* return the supported asynchronous timing mode. */ + +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION +static inline int onfi_get_async_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.async_timing_mode); +} + +/* return the supported synchronous timing mode. */ +static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); +} +#endif + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/string.h b/include/linux/string.h index e9b134d1428..8e44855712c 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -85,6 +85,9 @@ extern int memcmp(const void *,const void *,__kernel_size_t); #ifndef __HAVE_ARCH_MEMCHR extern void * memchr(const void *,int,__kernel_size_t); #endif +#ifndef __HAVE_ARCH_MEMCHR_INV +void *memchr_inv(const void *, int, size_t); +#endif #ifdef __cplusplus } diff --git a/include/linux/mtd/mtd-abi.h b/include/mtd/mtd-abi.h index 8bdd23112b4..d51c1abd186 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/mtd/mtd-abi.h @@ -24,6 +24,25 @@ struct mtd_oob_buf { unsigned char __user *ptr; }; +/* + * MTD operation modes + * + * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) + * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas + * which are defined by the internal ecclayout + * @MTD_OPS_RAW: data are transferred as-is, with no error correction; + * this mode implies %MTD_OPS_PLACE_OOB + * + * These modes can be passed to ioctl(MEMWRITE) and are also used internally. + * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. + * %MTD_FILE_MODE_RAW. + */ +enum { + MTD_OPS_PLACE_OOB = 0, + MTD_OPS_AUTO_OOB = 1, + MTD_OPS_RAW = 2, +}; + #define MTD_ABSENT 0 #define MTD_RAM 1 #define MTD_ROM 2 @@ -82,24 +101,42 @@ struct otp_info { uint32_t locked; }; +/* Get basic MTD characteristics info (better to use sysfs) */ #define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +/* Erase segment of MTD */ #define MEMERASE _IOW('M', 2, struct erase_info_user) +/* Write out-of-band data from MTD */ #define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +/* Read out-of-band data from MTD */ #define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +/* Lock a chip (for MTD that supports it) */ #define MEMLOCK _IOW('M', 5, struct erase_info_user) +/* Unlock a chip (for MTD that supports it) */ #define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +/* Get the number of different erase regions */ #define MEMGETREGIONCOUNT _IOR('M', 7, int) +/* Get information about the erase region for a specific index */ #define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) +/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) #define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) +/* Check if an eraseblock is bad */ #define MEMGETBADBLOCK _IOW('M', 11, loff_t) +/* Mark an eraseblock as bad */ #define MEMSETBADBLOCK _IOW('M', 12, loff_t) +/* Set OTP (One-Time Programmable) mode (factory vs. user) */ #define OTPSELECT _IOR('M', 13, int) +/* Get number of OTP (One-Time Programmable) regions */ #define OTPGETREGIONCOUNT _IOW('M', 14, int) +/* Get all OTP (One-Time Programmable) info about MTD */ #define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) +/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ #define OTPLOCK _IOR('M', 16, struct otp_info) +/* Get ECC layout (deprecated) */ #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout) +/* Get statistics about corrected/uncorrected errors */ #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) +/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ #define MTDFILEMODE _IO('M', 19) /* @@ -146,7 +183,21 @@ struct mtd_ecc_stats { }; /* - * Read/write file modes for access to MTD + * MTD file modes - for read/write access to MTD + * + * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled + * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode + * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode + * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled + * + * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained + * separately for each open file descriptor. + * + * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - + * raw access to the flash, without error correction or autoplacement schemes. + * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode + * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is + * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). */ enum mtd_file_modes { MTD_MODE_NORMAL = MTD_OTP_OFF, diff --git a/include/nand.h b/include/nand.h index 4f965235b6e..26190e4137d 100644 --- a/include/nand.h +++ b/include/nand.h @@ -56,17 +56,17 @@ extern nand_info_t nand_info[]; static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { - return info->read(info, ofs, *len, (size_t *)len, buf); + return mtd_read(info, ofs, *len, (size_t *)len, buf); } static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { - return info->write(info, ofs, *len, (size_t *)len, buf); + return mtd_write(info, ofs, *len, (size_t *)len, buf); } static inline int nand_block_isbad(nand_info_t *info, loff_t ofs) { - return info->block_isbad(info, ofs); + return mtd_block_isbad(info, ofs); } static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) @@ -78,7 +78,7 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) instr.len = size; instr.callback = 0; - return info->erase(info, &instr); + return mtd_erase(info, &instr); } |