summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-arm/arch-arm720t/hardware.h39
-rw-r--r--include/asm-arm/arch-arm720t/s3c4510b.h231
-rw-r--r--include/configs/evb4510.h164
-rw-r--r--include/configs/h2_p2_dbg_board.h4
4 files changed, 436 insertions, 2 deletions
diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h
new file mode 100644
index 00000000000..5064697858e
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/hardware.h
@@ -0,0 +1,39 @@
+#ifndef __ARM7_HW_H
+#define __ARM7_HW_H
+
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#if defined(CONFIG_S3C4510B)
+#include <asm-arm/arch-arm720t/s3c4510b.h>
+#elif defined(CONFIG_NETARM)
+#include <asm-arm/arch-arm720t/netarm_registers.h>
+#elif defined(CONFIG_IMPA7)
+/* include IMPA7 specific hardware file if there was one */
+#elif defined(CONFIG_EP7312)
+/* include EP7312 specific hardware file if there was one */
+#else
+#error No hardware file defined for this configuration
+#endif
+
+#endif /* __ARM7_HW_H */
diff --git a/include/asm-arm/arch-arm720t/s3c4510b.h b/include/asm-arm/arch-arm720t/s3c4510b.h
new file mode 100644
index 00000000000..7acbec4266f
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/s3c4510b.h
@@ -0,0 +1,231 @@
+#ifndef __HW_S3C4510_H
+#define __HW_S3C4510_H
+
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description: Samsung S3C4510B register layout
+ */
+
+/*------------------------------------------------------------------------
+ * ASIC Address Definition
+ *----------------------------------------------------------------------*/
+
+/* L1 8KB on chip SRAM base address */
+#define SRAM_BASE (0x03fe0000)
+
+/* Special Register Start Address After System Reset */
+#define REG_BASE (0x03ff0000)
+#define SPSTR (REG_BASE)
+
+/* *********************** */
+/* System Manager Register */
+/* *********************** */
+#define REG_SYSCFG (REG_BASE+0x0000)
+
+#define REG_CLKCON (REG_BASE+0x3000)
+#define REG_EXTACON0 (REG_BASE+0x3008)
+#define REG_EXTACON1 (REG_BASE+0x300c)
+#define REG_EXTDBWTH (REG_BASE+0x3010)
+#define REG_ROMCON0 (REG_BASE+0x3014)
+#define REG_ROMCON1 (REG_BASE+0x3018)
+#define REG_ROMCON2 (REG_BASE+0x301c)
+#define REG_ROMCON3 (REG_BASE+0x3020)
+#define REG_ROMCON4 (REG_BASE+0x3024)
+#define REG_ROMCON5 (REG_BASE+0x3028)
+#define REG_DRAMCON0 (REG_BASE+0x302c)
+#define REG_DRAMCON1 (REG_BASE+0x3030)
+#define REG_DRAMCON2 (REG_BASE+0x3034)
+#define REG_DRAMCON3 (REG_BASE+0x3038)
+#define REG_REFEXTCON (REG_BASE+0x303c)
+
+/* *********************** */
+/* Ethernet BDMA Register */
+/* *********************** */
+#define REG_BDMATXCON (REG_BASE+0x9000)
+#define REG_BDMARXCON (REG_BASE+0x9004)
+#define REG_BDMATXPTR (REG_BASE+0x9008)
+#define REG_BDMARXPTR (REG_BASE+0x900c)
+#define REG_BDMARXLSZ (REG_BASE+0x9010)
+#define REG_BDMASTAT (REG_BASE+0x9014)
+
+/* Content Address Memory */
+#define REG_CAM_BASE (REG_BASE+0x9100)
+
+#define REG_BDMATXBUF (REG_BASE+0x9200)
+#define REG_BDMARXBUF (REG_BASE+0x9800)
+
+/* *********************** */
+/* Ethernet MAC Register */
+/* *********************** */
+#define REG_MACCON (REG_BASE+0xa000)
+#define REG_CAMCON (REG_BASE+0xa004)
+#define REG_MACTXCON (REG_BASE+0xa008)
+#define REG_MACTXSTAT (REG_BASE+0xa00c)
+#define REG_MACRXCON (REG_BASE+0xa010)
+#define REG_MACRXSTAT (REG_BASE+0xa014)
+#define REG_STADATA (REG_BASE+0xa018)
+#define REG_STACON (REG_BASE+0xa01c)
+#define REG_CAMEN (REG_BASE+0xa028)
+#define REG_EMISSCNT (REG_BASE+0xa03c)
+#define REG_EPZCNT (REG_BASE+0xa040)
+#define REG_ERMPZCNT (REG_BASE+0xa044)
+#define REG_ETXSTAT (REG_BASE+0x9040)
+#define REG_MACRXDESTR (REG_BASE+0xa064)
+#define REG_MACRXSTATEM (REG_BASE+0xa090)
+#define REG_MACRXFIFO (REG_BASE+0xa200)
+
+/********************/
+/* I2C Bus Register */
+/********************/
+#define REG_I2C_CON (REG_BASE+0xf000)
+#define REG_I2C_BUF (REG_BASE+0xf004)
+#define REG_I2C_PS (REG_BASE+0xf008)
+#define REG_I2C_COUNT (REG_BASE+0xf00c)
+
+/********************/
+/* GDMA 0 */
+/********************/
+#define REG_GDMACON0 (REG_BASE+0xb000)
+#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020)
+#define REG_GDMASRC0 (REG_BASE+0xb004)
+#define REG_GDMADST0 (REG_BASE+0xb008)
+#define REG_GDMACNT0 (REG_BASE+0xb00c)
+
+/********************/
+/* GDMA 1 */
+/********************/
+#define REG_GDMACON1 (REG_BASE+0xc000)
+#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020)
+#define REG_GDMASRC1 (REG_BASE+0xc004)
+#define REG_GDMADST1 (REG_BASE+0xc008)
+#define REG_GDMACNT1 (REG_BASE+0xc00c)
+
+/********************/
+/* UART 0 */
+/********************/
+#define UART0_BASE (REG_BASE+0xd000)
+#define REG_UART0_LCON (REG_BASE+0xd000)
+#define REG_UART0_CTRL (REG_BASE+0xd004)
+#define REG_UART0_STAT (REG_BASE+0xd008)
+#define REG_UART0_TXB (REG_BASE+0xd00c)
+#define REG_UART0_RXB (REG_BASE+0xd010)
+#define REG_UART0_BAUD_DIV (REG_BASE+0xd014)
+#define REG_UART0_BAUD_CNT (REG_BASE+0xd018)
+#define REG_UART0_BAUD_CLK (REG_BASE+0xd01C)
+
+/********************/
+/* UART 1 */
+/********************/
+#define UART1_BASE (REG_BASE+0xe000)
+#define REG_UART1_LCON (REG_BASE+0xe000)
+#define REG_UART1_CTRL (REG_BASE+0xe004)
+#define REG_UART1_STAT (REG_BASE+0xe008)
+#define REG_UART1_TXB (REG_BASE+0xe00c)
+#define REG_UART1_RXB (REG_BASE+0xe010)
+#define REG_UART1_BAUD_DIV (REG_BASE+0xe014)
+#define REG_UART1_BAUD_CNT (REG_BASE+0xe018)
+#define REG_UART1_BAUD_CLK (REG_BASE+0xe01C)
+
+/********************/
+/* Timer Register */
+/********************/
+#define REG_TMOD (REG_BASE+0x6000)
+#define REG_TDATA0 (REG_BASE+0x6004)
+#define REG_TDATA1 (REG_BASE+0x6008)
+#define REG_TCNT0 (REG_BASE+0x600c)
+#define REG_TCNT1 (REG_BASE+0x6010)
+
+/**********************/
+/* I/O Port Interface */
+/**********************/
+#define REG_IOPMODE (REG_BASE+0x5000)
+#define REG_IOPCON (REG_BASE+0x5004)
+#define REG_IOPDATA (REG_BASE+0x5008)
+
+/*********************************/
+/* Interrupt Controller Register */
+/*********************************/
+#define REG_INTMODE (REG_BASE+0x4000)
+#define REG_INTPEND (REG_BASE+0x4004)
+#define REG_INTMASK (REG_BASE+0x4008)
+
+#define REG_INTPRI0 (REG_BASE+0x400c)
+#define REG_INTPRI1 (REG_BASE+0x4010)
+#define REG_INTPRI2 (REG_BASE+0x4014)
+#define REG_INTPRI3 (REG_BASE+0x4018)
+#define REG_INTPRI4 (REG_BASE+0x401c)
+#define REG_INTPRI5 (REG_BASE+0x4020)
+#define REG_INTOFFSET (REG_BASE+0x4024)
+#define REG_INTPNDPRI (REG_BASE+0x4028)
+#define REG_INTPNDTST (REG_BASE+0x402C)
+
+/*********************************/
+/* CACHE CONTROL MASKS */
+/*********************************/
+#define CACHE_STALL (0x00000001)
+#define CACHE_ENABLE (0x00000002)
+#define CACHE_WRITE_BUFF (0x00000004)
+#define CACHE_MODE (0x00000030)
+#define CACHE_MODE_00 (0x00000000)
+#define CACHE_MODE_01 (0x00000010)
+#define CACHE_MODE_10 (0x00000020)
+
+/*********************************/
+/* CACHE RAM BASE ADDRESSES */
+/*********************************/
+#define CACHE_SET0_RAM (0x10000000)
+#define CACHE_SET1_RAM (0x10800000)
+#define CACHE_TAG_RAM (0x11000000)
+
+/*********************************/
+/* CACHE_DISABLE MASK */
+/*********************************/
+#define CACHE_DISABLE_MASK (0x04000000)
+
+#define GET_REG(reg) (*((volatile u32 *)(reg)))
+#define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val)))
+#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask))
+#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask))
+#define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val)))
+#define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF)))
+#define GET__U8(reg) (*((volatile u8 *)(reg)))
+
+/***********************************/
+/* CLOCK CONSTANTS -- 50 MHz Clock */
+/***********************************/
+
+#define CLK_FREQ_MHZ (50)
+#define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */
+#define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */
+
+/*********************************************************/
+/* TIMER MODE REGISTER */
+/*********************************************************/
+#define TM0_RUN 0x01 /* Timer 0 enable */
+#define TM0_TOGGLE 0x02 /* 0, interval mode */
+#define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */
+#define TM1_RUN 0x08 /* Timer 1 enable */
+#define TM1_TOGGLE 0x10 /* 0, interval mode */
+#define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */
+
+#endif /* __S3C4510_h */
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
new file mode 100644
index 00000000000..4e14bf1a031
--- /dev/null
+++ b/include/configs/evb4510.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * Configuation settings for evb4510 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start u-boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ *
+ * Also swap the flash1 and flash2 addresses during debug.
+ *
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
+#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
+#define CONFIG_S3C4510B 1 /* it's a S3C4510B chip */
+#define CONFIG_EVB4510 1 /* on an EVB4510 Board */
+
+#undef CONFIG_USE_IRQ /* don't need them anymore */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_S3C4510_ETH 1
+#define CONFIG_DRIVER_S3C4510_I2C 1
+#define CONFIG_DRIVER_S3C4510_UART 1
+#define CONFIG_DRIVER_S3C4510_FLASH 1
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 2 /* we use Serial line 2, could also use 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 19200
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_ETHADDR 00:40:95:36:35:33
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.0.11
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */
+
+/*#define CONFIG_BOOTDELAY 10*/
+/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
+#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000"
+#define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "evb4510 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00780000 /* 4 ... 8 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x00000000 /* default load address */
+
+#define CFG_HZ 50000000 /* decrementer freq: 50 MHz */
+
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+*/
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map after relocation
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
+
+#define PHYS_FLASH_1 0x01000000 /* Flash Bank #1 */
+#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip, 8bit access) */
+
+#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
+#define PHYS_FLASH_2_SIZE 0x00080000 /* 512KB (one chip, 8bit access) */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_FLASH_SIZE PHYS_FLASH_1_SIZE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
+#define CFG_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (4*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+
+/* environment settings */
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_NOWHERE
+
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x20000) /* environment start address */
+#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* max size for environment */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/h2_p2_dbg_board.h b/include/configs/h2_p2_dbg_board.h
index 6082d2ce52a..e0d823f2dc3 100644
--- a/include/configs/h2_p2_dbg_board.h
+++ b/include/configs/h2_p2_dbg_board.h
@@ -108,14 +108,14 @@
static inline void set_led_state(int state)
{
static unsigned long hw_led_state = 0;
- volatile unsigned short *led_address = 0x04000016;
+ volatile unsigned short *led_address = (volatile unsigned short *)0x04000016;
hw_led_state = ((unsigned long)state);
*((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF);
}
-static inline void spin_up_leds()
+static inline void spin_up_leds(void)
{
volatile int i, j, k;